Newcon Optik LRM 220SI - Manuals

2 10.   CUSTOMER SUPPORT ......................................... 24   11.   QUALITY CERTIFICATE ..................................... 25   CAREFULLY READ ALL THE INSTRUCTIONS BEFORE USING THE UNIT! FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANTY AND MAY CAUSE INJURY! 1. BRIEF DESCRIPTION L...

3 measurement allows height calculation. The unit measures azimuth simultaneously as well. Speed of an object moving closer or further from the unit can also be calculated using the time-of-flight principle. Key Features  Three channel optical solution (optical, laser and receiver) ensures measurem...

4 2 3 4 5 6 7 1 8 2. DEVICE APPEARANCE Fig. 1. Front view 1 - Eyepiece 2 - Objective lens 3 - Laser emitter lens 4 - Receiver lens 5 - M (Mode) button 6 - A (Action) button 7 - Body of the device 8 - Rubber grip

6 3. DELIVERY SET Standard delivery set LRM 2200SI is supplied in a set comprised of the following: Qty LRM 2200SI 1 9V Lithium (non-magnetic) battery 1 Soft carrying case Cleaning cloth 1 1 Neck strap 1 Operation manual 1 Warranty card 1

7 4. SPECIFICATIONS Optics Magnification Objective lens diameter Exit pupil diameter Field of view Type of coating 7x 25 mm 3.6 mm 8  Fully multi-coated optics Range Finder Laser Measuring range Accuracy First, last and auto target selection Meters/Yards display Last 10 readings recall Reticle Targ...

9 5. OPERATION INSTRUCTIONS 1 – Low battery indicator 2 – Reticle (either -¦- or  ) 3 – Units of measurement 4 – Measurement result 5 – Target quality indicator 6 – Laser active indicator 7 – Setup mode indicator 8 – Ready mode indicator 4 6 2 1 5 3 8 7 Fig. 3. Liquid Crystal Display as seen throug...

11 Measuring procedure When the unit is powered off the LCD will appear blank. To activate the unit press and hold A button (Fig. 1) for half a second. The word ‘READY’ will appear on the display to indicate the unit is powered on. Pressing the A button (Fig. 1) in Ready to Measure mode will initiat...

12 surface is more reflective than a rough one. Larger targets reflect better than small ones. Ranging a target perpendicular to the laser beam provides better results than the one positioned under a sharp angle to the beam. Weather conditions that influence air transparency (rain, fog, snow, mist) ...

18 measured in the Scanning mode, though both will be quickly displayed, the second one may be difficult to register by eye. Nevertheless all data is recorded and may be recalled (see Data Recall mode for details.) Data Recall mode In Data Recall mode results of the last 10 measurements can be displ...

19 Pressing A button at any moment within the list of recalled results brings the unit to Ready to Measure mode. Choosing cLr at the end of recalled data will erase the device memory. Additional display information Additional indication is displayed in Ready to Measure mode: Y or M Indicates that di...

20 6. BEST MEASURING TECHNIQUE Laser range finder measures distance by catching laser beam reflected from the target. Everything that improves reflection increases the measurement reliability and maximum range. 1. Use tripod when ranging remote targets. The longer is the distance, the greater is the...

21 7. STORAGE AND MAINTENANCE The unit is a sophisticated precision optical instrument equipped with laser and electronics. Therefore, it should be handled with due care.  Keep away from direct sunlight.  Avoid impacts, jolts, dust, moisture, and sharp changes of temperature.  Do not use the devi...

23 9. WARRANTY NEWCON warrants this product against defects in material and workmanship for one year from the date of the original purchase. Longer warranty is available, subject to the terms of the specific sales contract. Should your Newcon product prove to be defective during this period, please ...

24 10. CUSTOMER SUPPORT Should you experience any difficulties with your NEWCON OPTIK product, consult this manual first. If the problem remains unresolved, contact our customer support department at (416) 663-6963 or toll free at 1-877-368-6666. Our operating hours are 9am-5pm, Monday - Friday, Eas...

25 11. QUALITY CERTIFICATE The unit has passed the quality inspection. Production date Serial number Quality Inspector Purchase date