Newcon Optik LRB 20 000 - Manuals

Page 2 - RANGE FINDER BINOCULARS LRB 20 000

Features of the LRB 20 000 Laser Range Finder Binoculars • Digital Data Output • First or Last Target Indication • Built-in Compass • Light Weight • Rugged • Meet all Military Specifications CONTENTS 1. Brief description 2. Purpose 3. Technical characteristics 4. Supplied accessories 5. Appearance o...

Page 3 - To secure trouble-free operation of the range finder:; - keep the range finder dry at all times especially in the cold; The following abbreviations are used herein:

- inspect the range finder exterior for physical damage (no cracks, dents, deep rust are admitted); - check the dehydrator for working condition. If the silica gel is pink in color, replace it with the new one taken from individual SPTA set (item 11.6.3); - place the battery in operation as directed...

Page 4 - TECHNICAL CHARACTERISTICS

2. PURPOSE 2.1. Binoculars range finder LRB 20 000 AEP 36.28.001 is a device of industrial-technical purpose and designed for ground surveillance, observation of individual targets and measurement. 2.2. The range finder complete with the Angular Mount is designed for referencing ground location poin...

Page 5 - SUPPLIED ACCESSORIES; battery

EMITTER: Ambient temperature Parameter –40 ˚ C normal conditions 50 ˚ C 1. Minimum operating pumping voltage U oper.min. , V, max 2. Maximum operating pumping voltage U oper.max. , V, max 3. Pumping voltage temperature coefficient ТКН n , V/ ˚ C 4. Capacity of storage capaci- tors C c of emitter tes...

Page 6 - Materials; APPEARANCE OF THE DEVICE

Table 4.1, continued Description Designation Qnty Serial No. Remar ks 19. Cable 20. Eraser 21. Cloth 22. Charging device 23. Protection device Materials 24. Silica gel, indicating GOST 8984-75 Package 25. Package 26. Package 27. Package 28. Casing 29. Casing 30. Cover 31. Cover 32. Cover Documents 3...

Page 8 - SAFETY PRECAUTIONS

6. SAFETY PRECAUTIONS 6 .1. Range finder is an opto-electronic device emitting high- density pulses of dark light at wavelength of 1.06 µm, characterized by the following dangerous factors according to GOST 12.1. 040-83: - direct laser radiation; - mirror-reflected laser radiation; - diffuse-reflect...

Page 11 - OPERATING PROCEDURE

To make sure that the needle is free from defects, check that: - the needle oscillates in a smooth and uniform manner to regain balance; - the position of the needle end is the same relative to the mark when the needle settles; - the needle ends are level with the marked plates within ± 0.5 mm. The ...

Page 14 - SERVICEABILITY TEST; adjustment knobs for play

9. SERVICEABILITY TEST The principal tests to be performed on the range finder are listed below. Table 9.1 What is checked, tools, instruments, equipment. Test procedure Technical requirement 1. Range finder completeness 2. Range finder exterior 3.Exterior of range finder optical parts (to be checke...

Page 19 - LONG TERM STORAGE

- protection device 12 , used to supply the range finder with (27±2.7) V DC or 22-29 V from a vehicle electrical system, or with 22-29 V or 12-14.5 V from external batteries; - cable 14 , used to couple the protection device to the electrical system of a track-laying vehicle; - cable 15 , used to co...

Page 20 - RECHARGEABLE BATTERY HANDLING; The rechargeable battery is supplied in discharged

This is provided by arranging the packing case so that the arrow marked on top points North. Charged batteries may be stored together with the range finder unit for up to three months. 13.3. The range finder placed in short-term storage (up to 3 months) is subject to inspection as directed in Sectio...

Page 22 - DATA OUTPUT TO EXTERNAL EQUIPMENT; ACCEPTANCE CERTIFICATE; Representative of

16. DATA OUTPUT TO EXTERNAL EQUIPMENT The data on measured range is output to a remote display or computer across connector X2. To output the data, it is necessary to apply the supply voltage of 3 to 8 V from the equipment to be connected to the range finder to pin 9 of connector X2. The amplitude o...

Page 23 - LONG TERM STORAGE CERTIFICATE; Accepted after; Long Term Storage by; PACKING CERTIFICATE

18. LONG TERM STORAGE CERTIFICATE Binoculars range finder LRB 20 000 AEP 36.28.001, Serial No. ___________________________ , has been preserved. Date of Long Term Storage ____________________ Name and grade of preservative_________________________ Long Term Storage period _____________________ Prese...

Page 24 - NEWCON OPTIK; warrants this product against defects in; NEWCON; is not responsible for warranty service should the

20. WARRANTY NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 months from the date of manufacturing. Should your Newcon product prove defective during this period, please bring t...

Page 25 - Laser range finder binoculars LRB 20 000; Range finder (viewed on the side of eyepiece)

Laser range finder binoculars LRB 20 000 1 - range finder; 2 - Angular Mount; 3 - tripod Fig. 1 Range finder (viewed on the side of eyepiece) 1 - housing; 2 - MEASURE 1 and MEASURE L buttons; 3 - belt; 4 - panel; 5 - ILLUMINATION toggle switch lever; 6 - Binocular eyepiece; 7 - screw; 8 - indicator ...

Page 26 - Angular Mount; Tripod mount

Angular Mount 1 - adjustment knob; 2 - lever; 3 - bracket; 4 - retainer; 5 - scale; 6 - framed lens; 7 - adjustment knob; 8 - compass; 9 - nut M8; 10 - framed lens; 11 - knob; 12 - support; 13 - level УК -10; 14 – azimuth circle; 15 – body Fig. 4 Tripod mount 1 - mounting head; 2 - base; 3 - leg; 4 ...

Page 27 - Individual SPTA set; Binoculars range finder unit LRB 20 000

Individual SPTA set 1 - Rechargeable battery 10D-0,55 С -1; 2 - fuse link VP1-1 1,0 А 250 V; 3 - pencil; 4 - sealing ring; 5 - eye shield; 6 - framed lens; 7 - cloth; 8 - eraser; 9 - wrench; 10 - coordinate converter; 11 - charging device; 12 – protection device; 13 - indicating silica gel; 14 throu...