Newcon Optik DN482 - Manuals

• Remove the rubber eyepiece guard from the scope. • Set the eyepiece in the medium position. • Screw the adapter ring with the camera in an internal groove of an eyepiece. • Switch on the device and focus the assembled system with the help of the objectives of the device and camera. If the image ca...

VIDEO 3. TECHNICAL CHARACTERISTICS General Magnification, x 3.7 6.1 Field of view, degree 10 8 Objective lens Focus length, mm 100 165 F-number 1.5 2.0 Focus range 10 m to infinity 30 m to infinity Eyepiece Focus length, mm 27 Eye relief distance, mm 45 Dioptre setting +3, -4 Mechanical characterist...

recommended to use Alkaline batteries, which ensure the most stable performance. b. Testing of operation in a daytime During the bright time of the day: Turn on the on/off switch (9). The lens cap (6) must be on. Direct the device at an object placed within 10-20 m from the viewer. Turn the focus kn...

Front and rear feet (2, 3) with thwart screws (6) are the standard feet for Standard prisms (4), manufactured by the companies that produce mounts (for example, Ernst Apel GmbH Germany). The mount of Standard prism type (4) and screws (5) are optional. Installation of the device should be performed ...