NEC NP3150 - Manuals - manualsarea.com

Page 2 - Introduction; Information on USB Wireless LAN:

Introduction Thank you for purchasing the NEC projector NP3150/NP2150/NP1150 (hereafter referred to asthe “projector”).The projector is equipped with the following features so that you can give effective presentations. • LAN port (RJ-45), USB Wireless LAN Unit, USB port (type A), supplied as standar...

Page 3 - USB Wireless LAN Unit; FCC Compliance; Reorient or relocate the receiving antenna.; Regulatory Information/Disclaimers; Important Information

3 Important Information USB Wireless LAN Unit FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) this device may not cause harmful interference and (2) this device mustaccept any interference received, including interference tha...

Page 4 - Usage restrictions in North America; The following channels can be used indoors only.; Regulatory Statement:

4 To comply with FCC RF exposure compliance requirements, the antenna used for this transmittermust be installed to provide a separation distance of at least 7.87"/20cm from all persons andmust not be co-located or operating in conjunction with any other antenna or transmitter. SAR compliance ha...

Page 5 - Improper intrusions; otherwise damage data or the system, etc.; Cautions on Usage; Do not use the USB Wireless LAN Unit near cardiac pacemakers.

5 Important Information • Improper intrusions Malicious third parties may without permission access the personal or company network and steal personal or confidential information, pretend to be someone else and leak incorrect information, rewrite information that has been intercepted, introduce comp...

Page 6 - Specifications

6 Specifications For United States, Canada, and Mexico Product Name Operating Voltage Max Amps Wireless Standard Modulation Method LED Display (Blue) IEEE802.11a IEEE802.11b IEEE802.11g Interface Dimensions Weight Environmental Considerations NP01LM3 5V (power supplied from the projector) Tx: 472 mA...

Page 7 - For other countries except United States, Canada and Mexico

7 For other countries except United States, Canada and Mexico Product Name Operating Voltage Max Amps Wireless Standard Modulation Method LED Display (Blue) IEEE802.11a IEEE802.11b IEEE802.11g Interface Dimensions Weight Environmental Considerations NP01LM2 5V (power supplied from the projector) Tx:...

Page 8 - Contents; Setting the LAN Setting of Personal Computer

8 Contents Contents Introduction ................................................................................ Inside cover Important Information ................................................................................... 3 Specifications .....................................................

Page 9 - compression algorithm; WIRELESS; WIRELESS; “Easy Connection” function for connecting wireless LAN; By using “Easy Connection” function; What You Can Do with User Supportware 5; What

9 1. What You Can Do with User Supportware 5 1-1. Image Express Utility 2.0 Image Express Utility 2.0 is a software tool used to send the screen of your personal computerto the projector via a network, without the signal cables. ● High-speed, high-quality image transmissions based on NEC’s original ...

Page 10 - -click switching of presenter; Note

10 ● Projected images can be transferred and saved to personal computers. When “Meeting Mode” is used, projected images can be sent to the personal computers ofall the participants (attendants) of a “Meeting”. The received images can be saved to yourpersonal computer with a memo (text data) attached...

Page 11 - Important

11 1-2. Desktop Control Utility 1.0 Desktop Control Utility 1.0 is software that operates the desktop screen of a personal computerat a remote location from the projector by using a network. ● A commercially available USB mouse is connected to the projector to operate the personal computer. ● Suppos...

Page 14 - Reference; -2. Supported the wireless LAN security type; “NETWORK TYPE” of the “CONNECTION” page.; Operating Environment

14 2. Operating Environment 2-1. Supported Projector User Supportware 5 supports the following NEC projector (as of August 2007) N P 3 1 5 0 / N P 2 1 5 0 / N P 11 5 0 N P S e r i e s Reference Some of software can be used with projectors other than the above projectors. For details,refer to the hel...

Page 15 - Operating Environment

15 2-3. Operating Environment The following is the operating environment for Image Express Utility 2.0. For the operatingenvironment of other software, please refer to the help function of each software. W i n d o w s Vi s t a ( 3 2 - b i t v e r s i o n ) H o m e B a s i cW i n d o w s Vi s t a ( 3...

Page 16 - LAN; Connecting LAN Cable

16 3. Connecting LAN Cable Connect a LAN cable to the LAN port (RJ-45) of the projector when connecting the projector towired LAN.After connecting LAN cable to the projector, set the required settings for the projector( next page). WIRELESS USB(LAN) WIRELESS LAN Server HUB, etc. LAN cable(commercial...

Page 17 - Press the; Setting the LAN Setting of Projector; Setting the LAN Setting of Projector

17 4. Setting the LAN Setting of Projector Reference For how to turn on/off the power to the projector and how to operate the buttons andremote control of the projector, refer to “User’s Manual” included in the User’s ManualCD-ROM. 4-1. Displaying On-Screen Menu (NETWORK SETTINGS) Preparation: Turn ...

Page 18 - SELECT; button to highlight “NETWORK SETTINGS”, and press

18 4 Press the button to highlight the “INSTALLATION” tab. 5 Press the SELECT button to highlight “NETWORK SETTINGS”, and press the button. The “NETWORK SETTINGS” screen will be displayed. • To make setting of wireless LANProceed to “4-2. Wireless LAN” ( next page). • To make setting of wired LANPro...

Page 19 - Flow of Setting

19 4-2. Wireless LAN When connecting the wireless LAN, configure the LAN settings in the “WIRELESS” page of“NETWORK SETTINGS” selected from On-Screen Menu. ■ Flow of Setting Setting of "CONNECTION". Select SSID in "SITE SURVEY". Input "SSID" (if necessary). Select "NETWOR...

Page 20 - Setting Wireless LAN; Display the “WIRELESS” page of “NETWORK SETTINGS”.

20 ■ Setting Wireless LAN 1 Display the “WIRELESS” page of “NETWORK SETTINGS”. Configure the setting of wireless LAN in the “WIRELESS” page of “NETWORK SETTINGS” selected fromOn-Screen Menu.<1> In the “NETWORK SETTINGS” setting window, if the “GENERAL” tab is highlighted, press the button to h...

Page 22 - Input “DNS CONFIGURATION”.; Example of setting 1

22 5 Input “SUBNET MASK”. If “DHCP” is not checked, input the subnet mask of the network to which the projector is connected.The method of inputting is the same as that of the “IP ADDRESS” field. 6 Input “GATEWAY”. If “DHCP” is not checked, input the default gateway of the network to which the proje...

Page 23 - Icon; EXIT

23 9 Select SSID from “SITE SURVEY” (if necessary). A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that areto be connected are selected from this list. When SSID is selected from the list, the “SSID” field,“TYPE” field and “CHANNEL” field will also be ...

Page 24 - Example of connection when

24 11 Select “NETWORK TYPE” (if necessary). The communication mode of the SSID selected in “SITE SURVEY” are automatically selected.The settings can be changed by moving the highlight to the “NETWORK TYPE” field and pressing the button. • “INFRASTRUCTURE” .. This is selected if communication is perf...

Page 25 - Select “SECURITY TYPE”.

25 13 Select “SECURITY” page (if necessary). Proceed to step 17 if SECURITY is not set. <1> Use the SELECT / button to select the “CONNECTION” tab, and press the button to highlight the “SECURITY” tab.The “SECURITY” page will be displayed. 14 Select “SECURITY TYPE”. Select whether SECURITY TYP...

Page 27 - Reconnect the network.; Finalize the setting.

27 17 Finalize “ADVANCED”. <1> Use the SELECT / button to highlight [OK] and press the button. The “WIRELESS” page will be displayed again. 18 Reconnect the network. <1> Use the SELECT / button to highlight “RECONNECT” and press the button. 19 Finalize the setting. <1> Use the SELE...

Page 28 - Flow of setting

28 4-3. Wired LAN When connecting a LAN cable to the LAN port of the projector, configure the LAN settings in the“WIRED” page of “NETWORK SETTINGS” selected from On-Screen Menu. ■ Flow of setting 1 3 Step Display "WIRED" page of "NETWORK SETTINGS". 4 Step Input "IP ADDRESS". ...

Page 29 - Setting Wired LAN; Display the “WIRED” page of “NETWORK SETTINGS”.

29 ■ Setting Wired LAN 1 Display the “WIRED” page of “NETWORK SETTINGS”. Configure the setting of wired LAN in the “WIRED” page of “NETWORK SETTINGS” selected fromOn-Screen Menu. If “NETWORK SETTINGS” is not displayed, refer to “4-1. Displaying On-ScreenMenu (NETWORK SETTINGS)” ( page 17). 2 Select ...

Page 30 - Settings of Projector” (

30 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) This section explains the procedure for Ad Hoc connection of wireless LAN between the personalcomputer and projector, by using the wireless network setting function with Windows VistaUltim...

Page 31 - Setting the LAN Setting of Personal Computer

31 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) 5 ([Example] W ireless LAN of W indows V ista: Ad Hoc connection) If you are not connected to a network, the following window will be displayed. 3 C l i c k 3 Click [Connect to a network]....

Page 32 - When the screen shows “Successfully connected to NECPJ”, check “

32 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) 7 When the screen shows “Successfully connected to NECPJ”, check “ M Save this network” and click [Close]. “Set Network Location” window will be displayed. Note • Unless “ M Save this netw...

Page 34 - a wireless LAN card is executed, terminate that utility.; Setting the LAN Setting of Personal Computer

34 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) This section explains the procedure for Ad Hoc connection of wireless LAN between the personalcomputer and projector, by using the wireless network setting function with Windows XP ServicePac...

Page 38 - Input WEP key to set up an encryption key and click [Connect].

38 11 Input WEP key to set up an encryption key and click [Connect]. • Input an encryption key of “WEP”. Enter “NECDS” in the Network key box, for example, if you have the WEP setting on the projector side configured with “64bit” and have “NECDS” input as Key 1. • The same encryption key should be i...

Page 39 - Refer to “User; Refer to “User’s Guide” and Help

39 7. Refer to “User’s Guide” and Help Each software program in User Supportware 5 contains each help file that explains the functionsand operation methods in detail.Also, “User’s Guide” (PDF) explains the basic operation procedure of each software programcarefully. 7-1. Displaying “User’s Guide” (P...

Page 41 - Displaying Helps other than Ulead Photo Explorer 8.0; Click in the following order.

41 7-2. Using Help The functions and operation of each software are described on the Help screen. This sectionintroduces how to display and use the Help screen. Note • The following instructions use operations under Windows Vista as an example.• Before displaying Help, install each software onto you...

Page 44 - Image Express Utility 2.0

NEC Projector User Supportware 5 ■ Image Express Utility 2.0 ■ Desktop Control Utility 1.0 ■ Ulead Photo Explorer 8.0 SE Basic ■ Viewer PPT Converter 3.0 ■ PC Control Utility 3.0 NP3150 / NP2150 / NP1 150 Wired and W ireless Network Setup Guide 7N8P8092 NP3150NWSETUP-02.pm65E 9/26/07, 11:15 AM 44