Page 2 - Contents
Contents Introduction E1 1. Connections E1 2. Mains Power E1 3. General Installation E2 4. SUPERNAIT 3 E3 5. Controls and Connections E5 6. System Upgrade Connections E6 7. Operation and Programmable Functions E7 8. NAIT XS 3 E8 9. Controls and Connections E10 10. System Upgrade Connections E11 11. ...
Page 3 - Introduction; Interconnect Cables
E1 Introduction Naim Audio products are conceived with performance as the top priority. Careful installation will help ensure that their full potential is achieved. This manual covers all integrated amplifiers. It begins with some general installation notes. Product specific information begins in Se...
Page 4 - General Installation; Siting The Equipment
E2 3. General Installation Naim equipment is designed to offer the finest performance possible avoiding compromise wherever practical. This can lead to circumstances that may be unfamiliar. The notes that follow contain advice specifically related to Naim equipment as well as more general warnings a...
Page 6 - SUPERNAIT 3
E4 Note: The AV Bypass feature must be used with care. It bypasses the SUPERNAIT 3 volume control leaving any signal connected to the av input to be passed to the speakers at full volume. Note: Inserting a headphone plug while AV Bypass mode is selected temporarily returns the SUPERNAIT 3 to normal ...
Page 7 - Front Panel Controls; Rear Panel Connections
E5 SUPERNAIT 3 5. Controls and Connections 5.1 Front Panel Controls Note: Icon descriptions can be found in Section 16. 5.2 Rear Panel Connections Note: Icon descriptions can be found in Section 16. ch1 -ve nc nc ch 2 cd and tuner in ch1 -ve ch1 (out) ch2 (out) ch 2 av and stream in/out +ve -ve +ve ...
Page 8 - SUPERNAIT 3 with additional NAP 200 power amplifier
E6 SUPERNAIT 3 6. System Upgrade Connections The two diagrams below illustrate examples of SUPERNAIT 3 system upgrades. Other systems upgrades using external power supplies or additional power amplifiers are possible. Contact your Naim retailer or local distributor for more information. Icon descrip...
Page 9 - Handset Volume and Balance Control
E7 SUPERNAIT 3 7. Operation and Programmable Functions The SUPERNAIT 3 incorporates some programmable functions and operational nuances. These are described in the following paragraphs. 7.1 Handset Volume and Balance Control The remote handset volume and balance keys provide some alternative control...
Page 12 - Front Panel Controls; Rear Panel Connections
E10 NAIT XS 3 9. Controls and Connections 9.1 Front Panel Controls Note: Icon descriptions can be found on Section 16. 9.2 Rear Panel Connections Note: Icon descriptions can be found on Section 16. ch1 -ve nc nc ch 2 cd and tuner in ch1 -ve ch1 (out) ch2 (out) ch 2 av and stream in/out +ve -ve +ve c...
Page 14 - Handset Volume Control
E12 NAIT XS 3 11. Operation and Programmable Functions The NAIT XS 3 incorporates some programmable functions and operational nuances. These are described in the following paragraphs. 11.1 Handset Volume Control The remote handset volume keys provide some alternative control characteristics. A short...
Page 16 - Front Panel Controls; Rear Panel Connections; Operation and Programmable Functions; Automatic Input Switching
E14 NAIT 5si 13. Controls and Connections 13.1 Front Panel Controls Note: Icon descriptions can be found on Section 16. 13.2 Rear Panel Connections Note: Icon descriptions can be found on Section 16. ch1 -ve nc nc ch 2 cd and tuner in Note: The NAIT 5Si features various technologies to reduce microp...
Page 17 - NAIT 5si; Handset Volume Control
E15 NAIT 5si Automatic Input Switching only becomes operational on exit from program mode by pressing and holding the handset prog key. Note: The NAIT 5si will leave program mode automatically if no control commands are received for five minutes. Note: In a few cases some further equipment configura...
Page 18 - NARCOM 5 Remote Handset
E16 15. NARCOM 5 Remote Handset 15.1 Using NARCOM 5 NARCOM 5 can be configured to operate preamplifiers, tuners or CD players by pressing the appropriate System Component Key. Note: The “rec” system component key enables record side input, mute and mono selection on appropriately equipped preamplifi...
Page 21 - Product Recycling
E19 18. Product Recycling Products that display the crossed-out wheeled bin logo cannot be disposed of as domestic waste. These products must be disposed of at facilities capable of re-cycling them and appropriately handling any waste by-products. Contact your local authority for details of the near...
