Nady WA120LTOD - Manuals - manualsarea.com

Page 3 - CONTENTS

CONTENTS INTRODUCTION ....................................................................................2 CONTROLS AND CONNECTIONS .......................................................3 OPERATING INSTRUCTIONS FOR THE NADY WA-120 ....................5 WA-120 WIRELESS MICROPHONE RECEIVER OPERATION...

Page 4 - INTRODUCTION

Thank you for purchasing a Nady WA-120 Wireless Portable P.A.—and congratulations on your choice. The WA-120 is the most affordable and compact of the popular line of Nady wireless P.A.’s. Ideal for many applications, including use in classrooms, conference/meeting rooms, churches, health clubs and ...

Page 5 - CONTROLS AND CONNECTIONS

3 MIC/TS 1. Wireless mic receiver antenna Pull out and extend fully for optimum range 2. Power ON/OFF switch 3. MIC and AUX signal input jacks ¼” TS (mono) 4. Speaker 5. Power ON LED indicator 6. RF ON LED indicator Indicates reception of transmitter signal 7. Volume controls 8. Tone controls 9. Lin...

Page 7 - OPERATING INSTRUCTIONS FOR THE NADY WA-120; • External Adapter; (Note: To avoid damaging your unit, use only the provided AC adapter; able battery slot (11) while the WA-120 is connected to AC power with

5 OPERATING INSTRUCTIONS FOR THE NADY WA-120 Powering the WA-120 • External Adapter Plug the external provided AC/DC Adaptor into the External DC input jack (14) socket. Then plug the AC/DC adapter plug into a standard 115VAC or 240VAC outlet (The AC adapter will detect the line voltage automaticall...

Page 8 - The REC OUT (9) can be connected to a recording device or to the input; as per the the following illustration:; volume (7) or repositioning the WA-120 with respect to the wired; Wiring Illustration

Then MIC input (3) can be used to connect a hard wire MIC. The REC OUT (9) can be connected to a recording device or to the input jack of a power amplifier to further amplify and enlarge the audio power. For stereo to mono conversion of the signals, wire the connecting cord as per the the following ...

Page 9 - Stand Mounting the WA-120; The WA-120 can be mounted on

7 Stand Mounting the WA-120 The WA-120 can be mounted on the optional MST-4B aluminum tripod stand for convenient place- ment in a higher position. Contact your dealer or the Nady service department. (See Page 12)

Page 10 - WA-120 WIRELESS MICROPHONE RECEIVER OPERATION

The WA-120 contains a built-in high quality quartz-locked, fixed frequency VHF wireless receiver precisely matched to the Nady WHT or WLT transmitter supplied; therefore generally no adjustments besides audio volume are required. In high RF activity environment, the MUTE (16) also needs adjusting to...

Page 11 - Transmitter Set-up and Operation; WHT HANDHELD MICROPHONE TRANSMITTER; WLT LAVALIER/ HEADMIC BODYPACK TRANSMITTER

9 The Nady WLT is a rugged compact bodypack designed for use with lavalier or headworn mics, and includes these special features: • OFF/STANDBY/ON switch allows convenient audio muting with the transmitter “ON” • Low battery LED indicator flashes once for unit “ON”; lights steady for low battery ale...

Page 12 - WLT Bodypack Transmitter

OFF/ST ANDBY/ON BAT LOW HI MIC 10 WLT Bodypack Transmitter Opening Battery Compartment 5 4 7 6 2 1 8 3

Page 13 - [Note: Observe care in selecting volume, transmitter location and

Transmitter Set-up and Operation • Snap open the battery compartment (1) and insert a fresh 9V battery (2), observing the correct polarity. Close the compartment. • The WLT is provided with a 3.5 mm locking jack (3) for connecting themicrophone. Plug in either the Lavalier/Lapel (4) or the Headworn ...

Page 14 - AC Power consumption:; Wireless Operating; SPECIFICATIONS; marked on the outside of the package, cashier’s check or money order; DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN

12 Audio Power Output: 20W maximum, 4 ohms External AC Power: 100~240VAC/50~60Hz (Universal Line Voltage Adaptor supplied) AC Power consumption: 40 VA External DC Power: 15VDC, 1200mA AC adapter Internal Batteries: 8 “D” size alkaline batteries (SUM-1) or optional 12V/1.2A (RB-120 Rechargeable Batte...

Page 15 - One Year Limited Warranty

One Year Limited Warranty Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, In...

Page 16 - Consumer Alert

Nady wireless systems are type accepted under FCC rules parts 90, 74 and 15. This device complies with RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference r...