Nady UWS100LTHM20U - Manuals

Page 2 - Contents; System Operation; Introduction; UHT-100 Handheld Mic Transmitter

Contents 2 Introduction ............................................................................................................................. 2 Using this Manual .................................................................................................................... 2 System Feat...

Page 3 - Quick User Controls Guide

4 Quick User Controls Guide UWS-100 receiver: Front View 1 SEL ECT AF A B CHA NNEL IR ASC RF A B UWS-100 UHF PLL WIRELESS SYSTEM DigiTRU Diversity ™ ASC ™ SYSTEM 2 7 4 5 6 3 15VDC IN 400mA MIC OUT BALA NCED UNBALANCED LINE OUT VOLUME POWER – + MIN MAX MUTE LEVEL 8 10 11 12 13 9 14 UWS-100 receiver: ...

Page 4 - UHT-100 Handheld Transmitter: Front and Back; UB-100 Bodypack Transmitter

6 Quick User Controls Guide UHT-100 Handheld Transmitter: Front and Back 7 15. MIC BALL Windscreen 16 A . LCD DISPLAY: CHANNEL Indicates channel (00-99) 16 B . LCD DISPLAY: BATTERY Indicates battery status from one (weakest) to five (strongest) bars. Flashing “BATT” indicates low battery 16 C . LCD ...

Page 5 - Ir WInDOW; Programming the; ⁄4” UnBalanCeD; RF Interference and Finding Open; Cautions and Troubleshooting

8 Press the Select button for one second to start the 100 channel (00-99) Autoscan for open frequencies. A running bar in a clockwise direction shows the scanning process which normally takes ten seconds. When it finds an interference-free channel, it will stop and store the channel for use. If manu...

Page 6 - Microphone Transmitter

10 11 is controlled by the VOlUMe COnTrOl (12) . For unbalanced line output connection, plug an audio cable with a ¼” mono (Tip/Sleeve) plug into the Unbalanced Line Out jack and plug the other end into your mixing board or amplifier. Adjusting the Volume control will increase or decrease the audio ...

Page 7 - UBT-100 Bodypack Transmitter

12 13 Operating the UHT-100 Handheld Transmitter The OFF/STBy/On pOWer SWITCH (18) has three positions and functions both as a power On/Off and as an audio mute On/Standby switch. During normal operation with the unit powered on standby, slide the OFF/STBY/ON power switch to the ON position. You wil...

Page 8 - Feedback; VOlUMe; rF Interference and Finding Open Channels; Consumer alert; Adjusting

14 15 Cautions and Troubleshooting Feedback Avoid acoustic feedback (howling or screeching) by taking care in selecting PA volume, transmitter location and speaker placement. Please also note the pickup pattern characteristics of the microphone selected. Unidirectional microphones are more resistant...

Page 9 - The receiver antennas should be kept

16 17 Specifications OVerall SySTeM perFOrManCe Operating Frequency range 667.0MHz-696.7MHz (U.S.) Freq. Synthesized (100 channels switchable) 300kHz/step pll system frequency stability <0.005% Frequency response 50Hz-18kHz +/-3dB Dynamic range 120dB Harmonic Distortion <0.5% Modulation FM (F3...

Page 10 - One Year Limited Warranty; This warranty is subject to the following conditions:; Frequency Plan; Channel

One Year Limited Warranty Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, In...