Nady U-1000 - Manuals

20 SPECIFICATIONS SYSTEM SPECIFICATIONS Operating Frequency Range ....................1000 channels switchable Freq. Synthesized ......................................PLL system with frequency stability <0.005%Frequency Response ................................30 HZ-15 KHZ ±3 dBDynamic Range .......

19 TIPS • For operation with external antenna, low loss RF shielded cable should be used and the length of the cable should not exceed 3m. • Do not place the receive antenna within 1 meter of another receiver or antenna. • The receiver antenna should be kept away from any metal surface.• If the Volu...

18 SYSTEM OPERATION (Note: The UH transmitter CAP (7) must be removed before installing the USBcable.) (Note: Only one transmitter can be used with one UHF-1000 receiver. Itis not possible to use two transmitters on the same frequency and mix theoutput of these transmitters into one wireless receive...

Connecting Audio OutputThere are two audio outputs on the back of the receiver. Mic-level balanced andLine-level unbalanced. Use shielded audio cable for the connection between thereceiver and the mixer. If the mixer / amp is a 1/4” phone jack, connect a cablefrom the 1/4” unbalanced audio output fr...

14 OPERATING INSTRUCTIONS UB-1000 Bodypack Transmitter 6. Sensitivity Set Level (Input level sensitivity)In input level sensitivity has four choices. “1” is lowestgain, and “4” is highest gain. In the Sens Set Level Menu, hold the SET (10) button for 3 seconds. The curserwill blink; press the UP (11...