Nady PMX-420 - Manuals - manualsarea.com

Page 2 - Channel Powered Console Mixer; C O N T E N T S

Congratulations on your choice of the NADY AUDIO PMX-420powered console mixer — you have purchased one of the finestpowered mixing units on the market today. This unit wasdeveloped using the expertise of professional sound engineersand working musicians. You will find that your new PMX-420powered mi...

Page 3 - Read all instructions before using the product.

W A R N I N G 3 IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basemen...

Page 4 - I N S TA L L AT I O N; INSPECTION

I N S TA L L AT I O N 4 To ensure years of enjoyment from your NADY AUDIO PMX-420, please read and understand this manual thoroughly beforeusing the unit. INSPECTION Your NADY AUDIO PMX-420 powered mixer was carefully packed at the factory in packaging designed to protect theunits in shipment. Befor...

Page 5 - C O N T R O L S A N D C O N N E C T I O N S

(5) CHANNEL PEAK LED The Peak LED illuminates whena channel input is overloading.It detects the peak level afterthe Equalizer Controls (6) andwill light just before clipping towarn that the signal isapproaching overload. You donot want the Peak LED to lightexcept very intermittently. If itlights per...

Page 6 - MASTER AND EFFECTS SECTION

C O N T R O L S A N D C O N N E C T I O N S 6 bus or the internal DSP Echo Effects. The channel Effects Sendcontrol is mono, post-EQ, and post-Ch Volume meaning thesignal level sent to the Effects Send bus will be affected by the Channel Volume Control (11) setting. For almost all effects send purpo...

Page 8 - Insert Cable

(35) POWER ON/OFF SWITCH Use this rocker switch to turn the unit on and off. (36) STEREO SPEAKER OUTPUTS These Left & Right 1/4” speaker outputs can each deliver up to210W RMS to 4 ohms loads or 150W RMS to 8 ohms loads withboth channels driven simultaneously. [Caution: Make sure that the speake...

Page 9 - C O N N E C T I O N S

9 C O N N E C T I O N S 8 Ω 8 Ω 8 Ω 8 Ω MONITOR SPEAKERS & POWER AMP REVERB / EFX PA or RECORDING DEVICE TAPE/CD/MP-3 PLAYER COMPRESSOR POWERED SUB CD PLAYER REVERB / EFX PA or RECORDING DEVICE

Page 10 - B L O C K D I A G R A M

Page 11 - S P E C I F I C AT I O N S; MASTER OUTPUT SECTION

S P E C I F I C AT I O N S The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice. 11 1. INPUTS Input Connector Impedance Sensitivity Max Leve...

Page 12 - SERVICE FOR YOUR NADY AUDIO PRODUCT

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608 Tel: 510.652.2411 • Fax: 510.652.5075 • nady.com SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at servi...