Nady IRW-2PA - Manuals

12 5 INSTALLATION 1. The IRW-2PA lockbox should be positioned in the room while considering the following criteria: • IR Sensors should be placed on either side of operating area and as close to microphone operating area as possible. All rules of sensor installation should be observed as per instruc...

(1) Battery Compartment/Cover(2) Power Switch(3) Power LED Indicator (2) (1) (3) 1. Transmitter Set-up Unscrew and remove the Battery Compartment Cover (1) by sliding it down off the microphone to expose the battery holders. Insert 2 fresh AA alkaline batteries, NiMH rechargeable batteries, or the o...

10 7 3. Connections: a. Connect the IRW-1S IR Sensors to the IRW-2PA receiver by plugging the sensor coaxial extension cable plugs into the Infrared Sensor Inputs (1) . Each sensor input will receive both channels A and B signals. To increase mobility and maximum range, additional sensors can be add...

9 8 IRW-2PA WIRELESS RECEIVER PA 1. Powering the IRW-2PA Turn on the IRW-2PA using the Power Switch (17) located inside the lockbox on the lower right panel. When powered on, the Ch A and Ch B IR Reception LED In- dicators (6) will light green if the corresponding transmitters are on and red when th...