Nady 4W-1KU - Manuals

Nady 4W-1KU – Manual in PDF format online.

Manuals:

Manual

Manual Nady 4W-1KU

Summary

Page 3 - System Features; channels and ASC; BT-1KU Bodypack Transmitters

System Features 4W-1KU Receiver Unsurpassed state-of-the-art PLL UHF • performance with 120dB dynamic range and operation up to 500 feet line-of sightFour complete and independent wireless • receivers with 1000 user-selectable UHF frequencies for simultaneous operation of four transmittersTrue Diver...

Page 4 - Quick User Controls Guide; UP BUTTON

4 Quick User Controls Guide 4W-1KU Receiver: Front View 12 GROUP CHANNEL VOL 9 10 11 8 GROUP CHANNEL VOL RECEIVER 1 SET RF A B AF IR ASC GROUP CHANNEL VOL RECEIVER 2 SET RF A B AF IR ASC GROUP CHANNEL VOL RECEIVER 3 SET RF A B AF IR ASC GROUP CHANNEL VOL RECEIVER 4 SET RF A B AF IR ASC POWER 1 4 5 3...

Page 6 - HT-1KU Handheld Transmitter

6 Quick User Controls Guide HT-1KU Handheld Transmitter 23 34 35 36 25 27 28 29 26 IR H L RF 22 30 33 24 31 32 22. BATTERY COVER Unscrew CW and full down to insert two AA alkaline batteries 23. MIC BALL Windscreen/dust cover 24. LCD DISPLAY For indication of GRP (00-09)/ CH (00-99), AUDIO INPUT LEVE...

Page 8 - Buttons Function; MAIN MENU; System Operation; IR Sync Programming; If you are using multiple transmitters at; Selecting the 4W-1KU QUaD Receiver

Buttons Function The Power Button (1) is used to turn ON or OFF all four receivers at the same time. When this power button is pressed for two seconds, the blue backlights on the lCD Displays (8) will light up indicating the receivers are on. Press the Power button again for two seconds to turn off ...

Page 9 - Groups; IR Sync; Rack-mounting the Receiver; Do not mount the receiver on a rack directly; Installing antennas; antenna extension Cables; Powering the Receivers; Any 16-18VDC source with minimum; Unbalanced audio; Connecting the Audio Outputs

9 To change the Volume Levels, press the (Up) or (Down) Buttons (7) anytime for single stepping, or hold the Up/Down button continuously for faster level selection. Select 1 of 63 (soft to loud sound) levels from the Volume menu and advance to exit Setup Mode by pressing the Set Button one more time...

Page 10 - adjusting the Squelch; Diversity a/B Indicators; audio level and Peak leD Indicator; aF Peak; Connecting the audio Outputs; Balanced; As when making any connection, make sure

adjusting the Squelch In normal operation, each 4W-1KU QUAD receiver’s Mute Control (16) works independently and should be adjusted clockwise (CW) to the minimum RF squelch setting at which the RF level Meter (12) and one of the LED Diversity a/B Indicators (2) will remain on while your transmitter ...

Page 11 - Setting up the Transmitter; Battery Compartment; Powering the Transmitter On/Off; Power; Programming the HT-1KU

11 HT-1KU Handheld Microphone Transmitter Buttons Function The RF Power level Switch (27) is used to select Hi/Low power transmission. Each time the Set Button (26) is pressed, the LCD menu will cycle in the following order: MAIN MENU > VOLUME > GROUP > CHANNEL > MAIN MENU (repeats) The ...

Page 12 - The IR link is infrared light and thus works; Buttons; If you are using multiple transmitters at the; Operating the HT-1KU Handheld; RF Power Switch

about 6-12” from the receiver to be used. On the receiver, when short pressing the aSC IR Sync Button (5) , while the main menu is displayed, the IR Infrared leD (4) will light up red and stay for about three seconds. This indicates IR transmission is in progress and IR data is transferring during t...

Page 13 - Connecting Audio Output; Avoid acoustic feedback (howling or

13 this setting for normal use not requiring maximum operating range. A range walk test before use will determine which setting is best for your application. Slide the On/Off switch to the “ON” position and the microphone is now ready to use. The receiver’s RF Signal Meter (12) and one Diversity a o...

Page 14 - If procedure is not done correctly during the

14 and should be replaced as soon as possible. To preserve battery life, turn the transmitter off when not in use. To turn the transmitter off, slide the Off/Mute/On switch to “MUTE” and then “OFF”. The LCD will display “OFF”, no LCD or backlight is lit up and the unit will be off. At Power Off the ...

Page 15 - Operating the BT-1KU; Connecting Audio Outputs; The audio level should be adjusted on

15 is Group 00 (Transmitter 1), 03 (Transmitter 2), 06 (Transmitter 3) and 09 (Transmitter 4), and Channel 00 for all transmitters. After programming is finished, close the battery compartment door, ensuring that it latches. The BT-1KU is now ready for use. note: If you are using multiple transmitte...

Page 16 - Specifications

16 Specifications SYSTeM OVeRall SPeCIFICaTIOnS Operating Frequency Range (U.S.) Band 1: 672.000-696.975MHz, (Int.) Band 2: 795.000-819.975MHz Freq. Synthesized (1000 channels switchable) 25kHz/step Pll System Frequency Stability <0.005% Frequency Response 30Hz-18kHz +/-3dB Dynamic Range 120dB Ha...

Page 17 - Cautions and Troubleshooting; Feedback; is not in the Mute; Unbalanced line; is adjustable so make sure; RF Interference and; Adjusting the; More bars in the

17 Cautions and Troubleshooting Feedback Avoid acoustic feedback (howling or screeching) by taking care in selecting PA volume, transmitter location and speaker placement. Please also note the pickup pattern characteristics of the microphone selected. Unidirectional mics are more resistant to feedba...

Page 18 - Miscellaneous Tips; For optimal operation with external; This is very important.

18 Miscellaneous Tips For optimal operation with external • antennas, low loss RF shielded cable should be used and the length of the cable should not exceed 10 ft. (3 m).The receiver antennas should be kept • away from any metal surfaces whenever possible as they can reflect away or shield the inco...

Page 19 - Frequency; Frequency Plan; Accessories; Part number; mm locking mini plug to 1⁄4”; Service Information; Do not attempt to service this unit yourself as

Frequency Frequency Plan Band 1 (U.S.): 672.000-696.975MHz Band 2 (International): 795.000-819.975MHz 25KHz per step (1000 Channels) U.S. Accessories Part number Description IC-U1K Instrument cable included for BT-1KU/GT transmitter, 3.5mm locking mini plug to ¼” Service Information In the U.S. If y...

Page 20 - One Year Limited Warranty; This warranty is subject to the following conditions:

6701 Shellmound Street | Emeryville, CA USA 94608 T 510.652.2411 | F 510.652.5075 | www.nady.com 12/21/10 One Year Limited Warranty Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date ...