Nady 401XQ2HT2LTE4FHE - Manuals

Page 2 - and servicing information.; sYsTeM feaTURes; • Noise-free transmitter ON/OFF operation; WHT Handheld Microphone Transmitter; sound, maximum feedback rejection and minimal handling noise; WGT & WLT Bodypack Transmitters; • Easily accessible input level adjust control for optimal sound

2 Table of ConTenTs System Features ................................................................................................................................ 2 Operation: 401X QUAD Receiver....................................................................................................... ...

Page 3 - opeRaTIon; Powering the Receiver; [Note: Any 16V DC source with 800mA capability; Connecting the Audio Output; [Note: To prevent possible undesired noises during use, leave

3 opeRaTIon 401x QUAD Receiver 1. Powering the Receiver Plug the 16V AC/DC ADAPTER (1) provided into the DC INPUT JACK (11) on the back of the receiver. Then plug the power supply into an AC outlet. [Note: Any 16V DC source with 800mA capability can also be used.] Turn VOLUME CONTROL (6) for all fou...

Page 4 - a. Instrument Connection (using the WGT instrument transmitter)

4 a. Instrument Connection (using the WGT instrument transmitter) Insert an audio cord with a ¼” mono phone plug in the AF OUTPUT JACK (8) on the rear panel of the receiver. Plug the other end of the cord into amplifier, effect or mixing board. Adjust the VOLUME CONTROL (6) on the 401X QUAD clockwis...

Page 5 - BATTERY

5 12 14 13 15 16 opeRaTIon WHT Handheld Microphone Transmitter 1. Unscrew the BATTERY COMPARTMENT COVER (12) and remove, exposing the BATTERY HOLDER (13) . Insert a fresh 9V ALKALINE BATTERY (14) , observing the correct polarity as marked, and screw the cover back on to the microphone. Make sure the...

Page 6 - WLT Lavalier/Lapel or Headworn Microphone; Bodypack Transmitter; use and keep it as straight as possible.]

6 opeRaTIon WLT Lavalier/Lapel or Headworn Microphone Bodypack Transmitter 1. Snap open the BATTERY COMPARTMENT (17) and insert a fresh 9V BATTERY (18), o bserving the correct polarity. Close the compartment. 2. The WLT is provided with a 3.5 mm LOCKING JACK (19) for connecting the microphone. Plug ...

Page 7 - Headworn; Opening Battery Compartment

opeRaTIon 7 Headworn Microphone Opening Battery Compartment 17 20 21 22 23 24 19 17 18

Page 8 - BATTERY INDICATOR LED

8 opeRaTIon WGT Instrument Bodypack Transmitter 1. Snap open the BATTERY COMPARTMENT (25) and insert a fresh 9V BATTERY (26) , observing the correct polarity. Close the compartment. The WGT-15 is provided with a 3.5 mm LOCKING JACK (27) for connecting the INSTRUMENT CABLE (28) . To secure the connec...

Page 10 - speCIfICaTIons; Overall SyStem PerfOrmance; omni or unidirectional lavalier mic or unidirectional; receIver

10 speCIfICaTIons Overall SyStem PerfOrmance Frequency Response ................................................................................................... 30-18KHz (-3dB) Dynamic Range ........................................................................................................ 1...

Page 11 - seRvICe InfoRMaTIon; one YeaR lIMITeD WaRRanTY; This warranty is subject to the following conditions:

11 seRvICe InfoRMaTIon In the U.S. If you are experiencing operational problems with your system, please refer to the Support page at www.nady.com for assistance. Should your wireless system require service, please contact the Nady Service Department at (510) 652-2411 for a Return Authorization (R/A...