Nady 3WA-1700 - Manuals - manualsarea.com

Page 2 - -CHANNEL PROFESSIONAL POWER AMPLIFIER; C O N T E N T S

Congratulations on your choice of the NADY 3WA-1700 power amplifier — you have purchased one of the finest power amplifiers onthe market today. This unit was developed using the exper tise of professional sound engineers and working musicians. You will findthat your new 3WA-1700 amplifier has superi...

Page 3 - Read all instructions before using the product.

W A R N I N G 3 IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following:1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement...

Page 4 - C O N T R O L S A N D C O N N E C T I O N S; FRONT PANEL

4 C O N T R O L S A N D C O N N E C T I O N S 1. POWER SWITCH To turn the unit ON or OFF, press the upper or lower portion ofthis button. Before turning on the amplifier, check all connectionsand turn down the level controls. A momentary muting is normalwhen turning the amplifier on or off. (Caution...

Page 5 - BACK PANEL

5 8. BALANCED INPUT CONNECTORS (1/4" TRS & XLR) These balanced 1/4” (6.3mm) TRS (Tip/Ring/Sleeve) phonejacks and balanced XLR jacks are designed to accept line levelbalanced or unbalanced signals for each channel. They arewired Tip/Pin 2 = (+), Ring/Pin 3 = (-), and Sleeve/Pin 1 =Ground. Bal...

Page 6 - I N S TA L L AT I O N; INSPECTION; RACK MOUNTING; I N P U T C O N N E C T I O N S

I N S TA L L AT I O N 6 To ensure years of enjoyment from your NADY AUDIO 3WA-1700 amplifier, please read and understand this manual thoroughlybefore using the unit. INSPECTION Your 3WA-1700 amplifier was carefully packed at the factory in packaging designed to protect the units in shipment. Before ...

Page 7 - S P E A K E R C O N N E C T I O N S

7 S P E A K E R C O N N E C T I O N S The following instructions describe the most common ways to install your amplifier into a sound system. Turn off the amplifier powerswitch before making any connections. (Note: Nady Systems assumes no liability for damaged speakers resulting from improper wiring...

Page 8 - • Mains & Monitor Mode

S P E A K E R C O N N E C T I O N S 8 • Mains & Monitor Mode 1. Input main Left and Right signals from your crossover into Channels 1 and 2.2. Input Monitor or Aux full-range signal from your mixer into the Subwoofer input.3. Set the Filter/Source switch to OFF. (Note: Do not connect a speaker l...

Page 9 - S P E C I F I C AT I O N S

9 S P E C I F I C AT I O N S 1. OUTPUT SECTION Power Output (all channels driven simultaneously, 1% THD) Channel 1 & 2 ....................................................................................................................................................................300W RMS per ...

Page 10 - N O T E S

Page 11 - SERVICE FOR YOUR NADY AUDIO PRODUCT

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608 Tel: 510.652.2411 • Fax: 510.652.5075 • nady.com SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at servi...