NAD C245BEE - Manuals

1 channel b SpeakerS (applicable to channel b only): Connect the right speaker to the CHANNEL B SPEAKERS terminals marked “R +” and “R-” ensuring that the “R+” is connected to the “+” terminal on your loudspeaker and the “R-” is connected to the loudspeaker’s “-” terminal. Connect the terminals mark...

AUTOMATED TURN-ON LOGIC (ATO LOGIC) The C 245BEE may be turned ON in any one of three discrete ways for complete system flexibility - from the front panel standby button, the 12V-TRIGGER circuit or by the input signal-sensing circuit. The ON/OFF power control is managed by the Automated Turn-On logi...

condition poSSible cauSeS poSSible SolutionS No power. The power cord is disconnected. • Plug the power cord into the wall outlet securely. • C 245BEE at standby mode. • Press front panel STANDBY button to switch ON the C 245BEE. • Rear panel POWER switch not at ON setting. • Set the rear panel POWE...

OVERALL SPECIFICATIONS channel a in or channel b in, channel a SpeakerS or channel b SpeakerS Continuous output power into 8 Ω and 4 Ω (both channels driven) >35 W (ref. rated THD, 20 Hz – 20 kHz) Continuous output power into 8 Ω (Mono, Bridge mode) >70 W (ref. 20 Hz - 20 kHz, <0.02 % THD) ...