Moxa 1150I - Manuals - manualsarea.com

Page 2 - User’s Manual; accordance with the terms of that agreement.; Copyright Notice; Copyright; Trademarks; MOXA is a registered trademark of The Moxa Inc.; Disclaimer

UPort 1100 Series User’s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice Copyright © 2008 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. Trademarks...

Page 3 - Table of Contents; Chapter 1

Table of Contents Chapter 1 Introduction..............................................................................................1-1 Overview ............................................................................................................................ 1-2 Package Checklist .........

Page 4 - Introduction; The following topics are covered in this chapter:; Overview; Adjustable Pull High/low, Terminator Resistors for the RS-485 Port

1 1 Chapter 1 Introduction The UPort 1100 Series of USB-to-serial adaptors provide an easy way to add COM ports to your computer. The UPort 1110 provides one RS-232 port, the UPort 1130 provides one RS-422/RS-485 port, and the UPort 1150 and UPort 1150I each provide one RS-232/422/485 port. As a plu...

Page 6 - Product Specifications

UPort 1100 Series User’s Manual Introduction 1-3 Product Specifications USB Version USB 1.1 (also compatible with USB 1.0 and 2.0) Connector USB type B Speed 12 Mbps Serial Interface No. of Ports 1 RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 TxD+(B), TxD-(A), RxD+(B), RxD-(A),GND RS-485 4-w...

Page 7 - LED Indicators; Name; Active

UPort 1100 Series User’s Manual Introduction 1-4 LED Indicators Active RxD TxD 1110 USB-to-Serial Adaptor Active RxD TxD 1130 USB-to-Serial Adaptor Active RxD TxD 1150 USB-to-Serial Adaptor RS-232/422/485 UPort 1110 UPort 1130 UPort 1150 Name Description Active This LED indicates normal operation. I...

Page 8 - To set the pull high/low resistors to 150 K

UPort 1100 Series User’s Manual Introduction 1-5 TR 150 KX 1K 2 1 ON DIP 3 Adjustable Pull High/low, Terminator Resistors for the RS-485 Port In some critical environments, you may need to add termination resistors to prevent the reflection of serial signals. When using termination resistors, it is ...

Page 9 - ATTENTION

UPort 1100 Series User’s Manual Introduction 1-6 ATTENTION Do not use the 1 K Ω setting on the UPort when using the RS-232 interface. Doing so will degrade the RS-232 signals and shorten the maximum allowed communication distance.

Page 10 - Installation and Configuration

2 2 Chapter 2 Installation and Configuration Installation of the adaptor is a simple process. First install the driver, then plug the adaptor into a USB port. When the adaptor is plugged in, Windows will load the correct drivers for the adaptor and the new COM port. In this chapter, basic installati...

Page 11 - Initial Driver Installation

UPort 1100 Series User’s Manual Installation and Configuration 2-2 Initial Driver Installation The Documentation and Software CD will contain the drivers for the adaptor. You may also download the drivers at www.moxa.com. The installation procedure is the same for all Windows operating systems. Use ...

Page 12 - Click; Install; to proceed with the installation.; STOP Installation

UPort 1100 Series User’s Manual Installation and Configuration 2-3 3. Click Install to proceed with the installation. 4. A window will pop up cautioning you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has thoroughly tested the driver for safe Windows ...

Page 13 - Finish; to complete the installation of the driver.; Hardware Installation; Found New Hardware; window should open

UPort 1100 Series User’s Manual Installation and Configuration 2-4 5. Click Finish to complete the installation of the driver. Hardware Installation After installing the driver, plug the adaptor into any upstream USB port, such as a USB port on your computer. Windows will automatically detect the ad...

Page 14 - balloon will appear in the bottom right corner of the Windows

UPort 1100 Series User’s Manual Installation and Configuration 2-5 2. Windows 98 users may skip to the next step. On Windows 2000 systems, a window will pop up cautioning you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has thoroughly tested the driver...

Page 15 - On the next window that appears, select; Install the software automatically (Recommended); then click; Next

UPort 1100 Series User’s Manual Installation and Configuration 2-6 2. After a moment, the Found New Hardware Wizard will open. If you see the following screen, select No, not this time , then click Next . 3. On the next window that appears, select Install the software automatically (Recommended) , t...

Page 16 - Windows will spend a few moments installing the UPort driver.; to

UPort 1100 Series User’s Manual Installation and Configuration 2-7 4. The installation wizard will search for the correct drivers. After a moment, a window will pop up cautioning you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has thoroughly tested th...

Page 17 - balloon will appear in the bottom right corner of the; this time; After a moment, the Found New Hardware Wizard will open. Select; Install the software

UPort 1100 Series User’s Manual Installation and Configuration 2-8 7. After Windows has completed installing the adaptor, it will automatically detect the new COM port. The Found New Hardware balloon will appear in the bottom right corner of the Windows desktop. 8. The Found New Hardware Wizard will...

Page 18 - Windows will spend a few moments installing the driver.

UPort 1100 Series User’s Manual Installation and Configuration 2-9 10. The installation wizard will search for the correct drivers. After a moment, a window will pop up cautioning you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has thoroughly tested t...

Page 19 - Configuring the COM Port; MOXA USB Serial Port

UPort 1100 Series User’s Manual Installation and Configuration 2-10 12. The next window indicates that Windows has completed the installation. Click Finish to proceed with installation procedure. 13. The Found New Hardware balloon will reappear, indicating that the installation was successful. Confi...

Page 20 - Configuring the Adaptor; Multi-port serial adaptors; . In the context menu that pops up, you may select; Properties; in order to modify the COM port settings.

UPort 1100 Series User’s Manual Installation and Configuration 2-11 Configuring the Adaptor If you need to change the COM number that the adaptor assigns to the COM port, or adjust other advanced settings, you may go to Device Manager and right-click the UPort adaptor, which will be listed under Mul...

Page 21 - In the; Port Configuration; tab, you will see the new COM port listed. Click; Port Setting

UPort 1100 Series User’s Manual Installation and Configuration 2-12 In the Port Configuration tab, you will see the new COM port listed. Click Port Setting to modify the COM number and other parameters.

Page 22 - Auto Enumerating COM Number; and; Set the change to all ports; are not available for this

UPort 1100 Series User’s Manual Installation and Configuration 2-13 ATTENTION Before modifying these settings, make sure that you have closed any applications that may be accessing the COM port, such as HyperTerminal. You may change the Port Number and enable or disable the Fast Flush function. For ...

Page 23 - Removing the Adaptor; select; Uninstall; from the context menu.; Uninstalling the Driver; Remove; next to

UPort 1100 Series User’s Manual Installation and Configuration 2-14 Removing the Adaptor The adaptor is a plug and play device. No special procedures are required to remove the adaptor; you may simply pull the adaptor out of the USB port. You should verify that no data is being transmitted before re...

Page 25 - Install Linux driver for UPort 1100 Series

UPort 1100 Series User’s Manual Installation and Configuration 2-16 Install Linux driver for UPort 1100 Series 1. Execute the following commands from the Linux prompt: #mount /dev/cdrom /mnt/cdrom #cd / #mkdir moxa #cd moxa #cp /mnt/cdrom/<driver directory>/ driv_linux2.6_uport1p_vx.x_build_xx...

Page 26 - Pin Assignment; UPort DB9 Pin Assignments; Pin; Terminal Block Pin Assignments; Terminal Block; GND

3 3 Chapter 3 Pin Assignment UPort DB9 Pin Assignments The UPort 1100 series uses male DB9 connectors. Pin assignments are shown in the following diagram: DB9 (male) Pin RS-232 RS-422 4-wire RS-485 2-wire RS-485 1 DCD (in) TxD-(A) - 2 RxD (in) TxD+(B) - 3 TxD (out) RxD+(B) Data+(B) 4 DTR (out) RxD-(...