Page 2 - Meaning of Pictographs
3 2 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER Sections Brushcutter 2 Hedge Trimmer 18 Pruning Saw 30 Edger 44 Cultivator 52 Contents Meaning of pictographs 2 Technical Data 3 Names of Parts 4 Safety Instructions 5 Ensuing Safe Operation 6 Fuel and Oil 8 Assembly 8 Starting and Stopp...
Page 3 - Safety Instructions; Names of Parts (with solid blade attached)
5 4 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER Safety Instructions 1. About This Manual CAUTION This manual contains important safety instructions. Before using this device, read this manual carefully until you are familiar with the contents. Carefully observe all warnings and safety...
Page 4 - Ensuring Safe Operation
7 6 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER Nylon trimmerThe nylon trimmer is suitable for lawn-mowing orbrushcutting in locations with obstacles such as trees,fences or walls. NOTE When operating the brushcutter, install the appropriatecutting attachment guard being used. ( See F...
Page 7 - Inspection and Maintenance
13 12 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER releasing the handle can cause the cutting blade or nylon trimmer to kick, possibly resulting in injury. • Before starting the engine, put on the harness correctly, attach the brushcutter to the harness, and stand in the correct brushc...
Page 11 - Names of Parts
21 20 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER Safety Instructions 1. About This Manual CAUTION This manual contains important safety instructions. Before using this device, read this manual carefully until you are familiar with the contents. Carefully observe all warnings and safe...
Page 14 - Long term storage; Inspection & Maintenance Checklist
27 26 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER Long term storage If the machine will not be started for 30 days of longer, maintain and store the machine as follows:1. Remove debris from the machine. Check the machine for damage and loose screws. Correct any problems so that the ma...
Page 15 - Troubleshooting
29 28 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER Troubleshooting This troubleshooting section describes possible causes and remedies for problems you might encounter during operation of the machine. If a problem persists after you have attempted the solutions recommended in this sect...
Page 16 - Contents
31 30 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER Sections Brushcutter 2 Hedge Trimmer 18 Pruning Saw 30 Edger 44 Cultivator 52 About This Manual Thank you for purchasing this product. This instruction manual describes operating procedures and precautions as well as inspection and mai...
Page 19 - Assembly of the Pruner
37 36 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER 9. Cutting pattern • Do not attempt to cut branches exceeding 15 cm in diameter. • If it is necessary to cut a thick branch, cut it in several stages. • If the saw chain becomes jammed in a branch during operation, or if the saw chain ...
Page 20 - Wearing the Harness
39 38 CUL TIV A TOR EDGER PRUNING SA W HEDGE TRIMMER BRUSHCUTTER Bar And Chain Maintenance • Dismount the guide bar and check the oiling port for blockage (Fig 25.) • Remove sawdust in the bar groove (1) and the oiling port (2) (Fig 26.) • Grease the nose sprocket (2) from the feeding port on the ti...
Page 33 - Morrison, a division of Masport Limited
Copyright © Morrison Morrison, a division of Masport Limited 1-37 Mt Wellington Highway, Panmure Auckland 1060 New Zealand P: 0800 627 767 Masport Australia Pty Limited 27 Commercial Drive Dandenong South, VIC 3175 Australia P: 1300 366 225