Monte Carlo 5STR52 - Manuals

Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes an 70-1999), including fire-rated construction. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer. After making the wire con...

Loosen the 3 screws with slots and remove the other 3 screws. Save the screws. Take the last allen screw and align with hole in the switch housing cap or light kit, then tighten all 3 allen screws securely. To remove the top motor cover twist the cover and remove this will allow acesss to the screw ...

Tighten both yoke set screws to further secure down- rod. 23 Install cotter pin into cross pin to secure. 22 Align holes in downrod and holes in yoke and install cross pin. 21 Loosen the 2 yoke screws. 20 Make wire connections as per above diagram. Connect the white wire from the fan to the White or...