M&K Sound VX-850 - Manuals - manualsarea.com

Page 2 - Please record the following information for your records:; TABLE OF CONTENTS; FIGURE 1

Please record the following information for your records: Serial Number: Date of Purchase: Dealer Name: Dealer Address: City/State/Zip: Country: Invoice Number: POWERED SUBWOOFER TABLE OF CONTENTS 1. SAFETY INSTRUCTIONS....................................................................................

Page 3 - SAFETY INSTRUCTIONS

POWERED SUBWOOFER 1. SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All safety and operating instructions should be read before this product is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS - All warnings on this produc...

Page 4 - VOLTAGE SELECTOR AND POWER CORD; DETACHABLE POWER CORD; BEFORE the cord is plugged into the AC wall socket.; WHERE TO LOCATE YOUR SUBWOOFER; If possible, avoid corners near doorways or openings.

2. INTRODUCTION Congratulations! You have just made perhaps the most exciting and dramatic addition that you could make to your audio or multichannel audio/video system. The new dimension of deep and powerful bass provided by your M&KVX-series powered subwoofer will thrill and excite you. We enc...

Page 5 - WIRING WITH THE RCA JACK INPUTS

Ultimately, the amount and quality of bass you get in your room are dependent on the room itself. Low frequency bass sounds are affected most by the size of the room and the method of construction used to build it. All rooms aredifferent when it comes to reproducing bass, and in any given room, bass...

Page 6 - FIGURE 2 - CONNECTING TO A STEREO AMP OR PREAMP; SURROUND PROCESSOR OR RECEIVER; FIGURE 1 - CONNECTING TO A COMPONENT’S SUBWOOFER OUTPUT; SUBWOOFER

This will give you better bass quality than using the speaker inputs, because it bypasses your amp or receiver's amplifier stage. To connect the subwoofer in this way, simply run one or a pair of shielded RCA - RCA interconnectcables from the output jacks on your component to the "LINE LEVEL"...

Page 7 - USING SPEAKER WIRE CONNECTIONS; Make matching connections for the Right channel. See Figure 3.; SATELLITE SPEAKER WIRING OPTIONS; AMPLIFIER OR RECEIVER; FIGURE 3 - WIRING TO AMP OR RECEIVER USING SPEAKER WIRES

If you don't have a subwoofer output available, check to see if you have preamp outputs on your preamp, amp, or processor to be able to use these inputs. If you have only one set of preamp outputs, use a Y-connector to feed boththe amplifier and the subwoofer. See Figure 2. Use a Y-connector to conn...

Page 8 - PLUGGING IN THE SUBWOOFER; normal sound of its power supply charging.

2. You can also connect your satellite speakers to the subwoofer. If you choose to do this, connect theamplifier to the "From Amplifier" terminals on the back of the subwoofer and connect the satellite speakersto the "To Speakers" terminals on the back of the subwoofer. For each chan...

Page 9 - USE OF THE “PHASE” CONTROL

where the subwoofer sounds in balance with the satellite speakers. If the system is not working properly, unplug thesubwoofer and check all of your connections. Call your dealer or the factory if you cannot solve any problem. 6. USE OF THE “PHASE” CONTROL Your subwoofer has a phase control that allo...

Page 10 - USING MULTIPLE SUBWOOFERS; impact and definition, as well as greater output and dynamic range.; HOME THEATRE USAGE; If your subwoofer has no output:

9. USING MULTIPLE SUBWOOFERS Using two (or more) subwoofers in your system gives you the ultimate in bass performance. You'll hear improved impact and definition, as well as greater output and dynamic range. If multiple subwoofers are used, place them in the same location. Stacking is best, but you ...

Page 11 - If you hear a persistent hum or buzz through the subwoofer:

5. If the red LED is lit, try this test: Turn the "BASS LEVEL" control to "MIN". Plug a standardRCA cable into the "FROM PREAMP" jacks. Lightly touch the plug at the free end of the cable,while slowly turning the "BASS LEVEL" control clockwise. If you hear noise from ...

Page 12 - IF YOU NEED TO REPLACE THE EXTERNAL FUSE:; IF YOU NEED SERVICE; DO NOT RETURN YOUR SPEAKERS TO THE FACTORY FOR; Here are the instructions for speaker setup.

IF YOU NEED TO REPLACE THE EXTERNAL FUSE: Disconnect supply cord before changing fuse. Replace fuse only with same type. Remove the fuse cap and inspect the fuse. Look carefully at the fuse. If the wire filament inside the glass is bro- ken, replace the fuse ONLY with one of the identical size and v...

Page 15 - SPECIFICATIONS; Sealed Box

14. SPECIFICATIONS VX-860 ENCLOSURE TYPE: Sealed Box WOOFER: Single 12" Driver POWER RATING: 250 watts RMS FREQUENCY RESPONSE: 20Hz - 200Hz ± 3dB DIMENSIONS (HxWxD): 0” x 0” x 0” WEIGHT: lbs./ kg. VX-850 ENCLOSURE TYPE: Sealed Box WOOFER: Single 12" Driver POWER RATING: 250 watts RMS FREQUEN...