M&K Sound SW-95 - Manuals - manualsarea.com

Page 2 - Please record the following information for your records:; TABLE OF CONTENTS; MOUNTING THE SPEAKER IN THE WALL

Please record the following information for your records: Serial Number: Date of Purchase: Dealer Name: Dealer Address: City/State/Zip: Country: Invoice Number: TABLE OF CONTENTS 1. INTRODUCTION........................................................................................3COMPONENT OVERVIE...

Page 3 - INTRODUCTION; THESE ARE THE MAJOR COMPONENTS OF YOUR NEW SPEAKER SYSTEM

3 FRAMELESS IN-WALL SPEAKER 1. INTRODUCTION Congratulations! Your new M&K in-wall speaker system will give you years of unmatched enjoyment and excitement while listening to your favorite musical and audio/video sources. We encourage you to read this owner’s manual, as there is a greatdeal of in...

Page 4 - INSTALLATION INTO EXISTING WALLS; IMPORTANT! - MAKE SURE WALL ELECTRICITY IS

4 FRAMELESS IN-WALL SPEAKER 2. INSTALLATION INTO EXISTING WALLS 3. SPEAKER WIRING The Positive (+) lead from your amplifier or receiver should be connected to one of the RED (+) INPUT terminal, and the Negative (-) lead from your amplifier or receiver should be connected to one BLACK (-) INPUT termi...

Page 5 - EQUALIZED terminal, the subwoofer level should be set lower.

5 FRAMELESS IN-WALL SPEAKER However, getting the best tonal balance in any given room involves many variables. Therefore, the SW-85 and SW-95 speak- ers allow you to alter their tonal balance in order to get the ideal sound quality at your favorite listening location (where it counts!),for the progr...

Page 6 - BASS ROLL OFF; MOUNTING YOUR NEW SPEAKER IN THE WALL

6 FRAMELESS IN-WALL SPEAKER 10. Remove packing material and grille fromspeaker. Do not remove the elastic cord! Makesure that the mounting screws are flush with thefront baffle as shown. 11. Angle the speaker toward the wall and slip the bottom portion of the mounting arms into the wall opening. mou...

Page 8 - SATELLITE AND SUBWOOFER PHASE TEST; speaker inputs on the back of BOTH Main speakers.; SPEAKER DAMAGE & HOW TO AVOID IT

8 FRAMELESS IN-WALL SPEAKER If you have any questions about your speaker system, please contact your M&K dealer or call the M&K factory directly at (818) 701-7010, from 8:30 AM to 5:00 PM Pacific Time, Monday through Friday. We will be happy to help you with any question.Additional informati...

Page 9 - IF YOU NEED SERVICE; DO NOT RETURN YOUR SPEAKERS TO THE FACTORY FOR; REMOVING THE SPEAKER FROM THE WALL; Follow these steps to remove your M&K in-wall speaker from the wall.

9 FRAMELESS IN-WALL SPEAKER ! ! IMPORTANT! - MAKE SURE WALL ELECTRICITY ISTURNED OFF BEFORE REMOVING THE SPEAKER ! IMPORTANT! - BE SURE THAT YOU SECURE THE LOOSE SPEAKER WIRES TO THE BRACKET ORTHE STUD OR THEY WILL BE LOST IN THE WALL! 1. Remove the speaker grille. 2. While holding baffle, loosen sc...

Page 10 - rough cut; PRE-CONSTRUCTION BRACKET INSTALLATION; NOTE: This step is optional and applies to new construction only.

10 FRAMELESS IN-WALL SPEAKER ! ! IMPORTANT! - MAKE SURE WALL ELECTRICITY ISTURNED OFF BEFORE STARTING INSTALLATION ! 1. Attach the mounting strips to the pre-construction bracket with the included sheet metal screws. 2. Attach the bracket assembly to the wall studs with screws or nails (not included...

Page 11 - SPECIFICATIONS

FRAMELESS IN-WALL SPEAKER 11 12. SPECIFICATIONS SW-95 & SW-62 IMPEDANCE: 4 ohms RECOMMENDED POWER: amplifiers with between 25 and 200 watts continuous MAXIMUM POWER: 200 watts RMS unclipped peaks FREQUENCY RESPONSE: 70 Hz - 20 kHz ± 2 dB SENSITIVITY (2.83 V @ 1m): 92dB OVERALL DIMENSION (H x W):...