Mitsubishi WD385U-EST- Manuals

EN-9 4. Projector registration 4.1. Connection Connect the controller PC and the projector, which have installed “ProjectorView Global+”, to a commercially available LAN cable or wireless LAN adapter.When connecting multiple projectors, use a commercially available hub. • A LAN terminal or 802.11b/g...

EN-10 External hub External hub External hub External hub Projector Projector External hub Router Router Projector Projector Projector Projector Projector Connection example 4 Connection example 5 Connection example 6 Controller PC Controller PC Controller PC Commercially available LAN cable

EN-11 4. Projector registration 4.2. Registration of projector to “ProjectorView Global+” The procedures to register projectors vary among the foregoing connection examples.• In connection examples 1 to 4 (where projectors are installed within the same local network), the projectors within such netw...

EN-12 4. Projector registration Procedure B - Connection examples 5 and 6 (where projectors are installed via a router) To automatically detect projectors connected via a router, confirm the IP address in the projector network menu and specify a range of IP addresses to search that particular IP add...

EN-13 4. Projector registration <Note> • Set the default gateways of the projectors and PC correctly. For details, contact your network administrator.• Be sure to make a note of the IP addresses and default gateways you set. If you forget the setting values, you may not be able to detect the p...

EN-14 4. Projector registration 4.4. When changing projector settings (1) Select the projector which you like to change from the projector list on the main screen.(2) Select “Edit Projector Setting” from “Configuration” of the menu bar. • “Edit Projector Setting” window is displayed. (3) Set the Pro...

EN-15 5. Operation of projector 5.1. Operation of projector by remote controller Group or single unit of projector can be operated. (1) Select the projector which you like to operate from the projector list on the main screen. • When selecting more than one projector simultaneously, select while pre...

EN-16 5. Operation of projector 5.2. Confirmation of projector status The status of the projector is displayed on the projector list on the main screen. Item Description Check Theft detector setting (ON/OFF) No. Projector list registration number Projector Name Projector name set in the application ...

EN-17 6. Schedule setting 6.1. Creation of projector group Multiple projectors can be controlled and batched by sorting groups. Also, each group can set each time of the power supply ON/OFF every day.Since the schedule of the power supply ON/OFF is performed by each group, the projector which you li...

EN-18 6. Schedule setting <Note> • The power supply ON and the power supply OFF can not be selected at the same time of the same day of the week. • The Schedule Setting will be executed while “ProjectorView Global+” is in operation.• Depending on usage conditions, such as when there are so man...

EN-22 8. Visual PA2 (Visual PA2 enabled projectors only) 8.2. Saving messages entered and settings specified in Visual PA2 You can save messages entered in Textbox, as well as settings specified for Text, Frame, Location, and Text Speech.These must be saved before you activate the Schedule function ...

EN-23 8. Visual PA2 (Visual PA2 enabled projectors only) 8.5. Configuring the Schedule function of Visual PA2 By using the Visual PA2’s Schedule function, your intended messages can be displayed on the screen at a set time. (1) Click [Edit] in the Schedule area. • "Visual PA2 Schedule" windo...

EN-24 9. Others 9.1. Troubleshooting • The projector can not be recognized. The projector may not be recognized automatically due to the setting of fire wall. In such case, the communication of “ProjectorView Global+” should be registered as an exception to the fire wall. For the setting of the fire...