Mitsubishi PKA-RP50GAL- Manuals

6 Note:The day and time will not appear if clock use has been disabled at FunctionSelection of remote controller. Day of the Week &Time display ˚C ˚C TIME SUN PAR-21MAA ON/OFF FILTER CHECK OPERATION CLEAR TEST TEMP. MENU BACK DAY MONITOR/SET CLOCK ON/OFF 2 4 9 1 A 1. Press the or Set Time button...

7 5. Operation <To Stop Operation> ■ Press the ON/OFF button 1 again. • The ON lamp 1 and the display area go dark. Note:Even if you press the ON/OFF button immediately after shutting down the op-eration is progress, the air conditioner will not start for about three minutes.This is to prevent...

8 6.1. For Wired Remote-controller You can use Function Selection of remote controller to select which ofthree types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto Off timer. 6.1.1. Weekly Timer ■ The weekly timer can be used to set up to eight operations for each dayof the week.• Each o...

9 6.1.2. Simple Timer ■ You can set the simple timer in any of three ways.• Start time only: The air conditioner starts when the set time has elapsed. • Stop time only: The air conditioner stops when the set time has elapsed. • Start & stop times: The air conditioner starts and stops at the resp...

10 7. After completing steps 3 to 6 above, press the Filter button 4 to lock in the value. Note:Your new settings will be cancelled if you press the Mode (Return) button 2 before pressing the Filter button 4 . 8. Press the Mode (Return) button 2 to return to the standard control screen. 9. Press the...

11 AFTER TIMER OFF AUTO OFF 5 1 4 Timer Setting <Checking the Current Auto Off Timer Setting> 1. Be sure that the “Auto Off” is visible on the screen (at 1 ). 2. Hold down the Timer Menu button B for 3 seconds , so that “Monitor” is indicated on the screen (at 4 ). • The timer remaining to shu...

12 7.2. Error Codes indication ON/OFF ERROR CODE ● If the ON lamp and error code are both flashing: This means that the air conditioner is out of order and operation has been stopped (and cannot resume).Take note of the indicated unit number and error code, then switch off the power to the air condi...

16 When the remote controller cannot be used When the batteries of the remote controller run out or the remote controllermalfunctions, the emergency operation can be done using the emergencybuttons on the grille. A DEFROST/STAND BY lamp B Operation lamp C Emergency operation switch (heating) D Emerg...

17 C B D A ■ PKA-RP·GAL 1 Pull both the bottom corners of the intake grille to open the grille,then lift the filter. ■ PKA-RP·FAL B A 1 Hold the filter lug (located at the bottom of the intake grille) and pull itout downward. A Filter B Lug • To reinstall the filters, push the filter lug upward. ■ P...

18 Having trouble? Air conditioner does not heat or cool well. When heating operation starts, warm air does not blow from the indoor unitsoon. During heating mode, the air conditioner stops before the set room tem-perature is reached. Airflow direction changes during operation or airflow direction c...

Please be sure to put the contact address/telephone number on this manual before handing it to the customer. • Low Voltage Directive 73/23/ EEC • Electromagnetic Compatibility Directive 89/336/ EEC This product is designed and intended for use in the residential, commercial and light-industrial envi...