Mitsubishi PJZ012A087B - Manuals

4 Never perform any modification. Contact your dealer for repairing. Improper repairing may lead to water leakage, electric shock or fire. Normally the refrigerant does not leak. But if it leaks and contacts fire such as fan heater, space heater or cooking heater, it may produce toxic chemicals. Whe...

5 HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL > 1 Press TIMER button. It enters the timer mode.“Current day of the week” and “Current time ” are displayed.[EXAMPLE] Monday : 10 o’clock in the morning Display area : [ ] [ ] [ ] (lit) 2 Press ▲ or ▼ button. By pressing ▼ or ▲ butto...

6 1 Press TIMER button. 2 Press ▼ button once. “ ” Æ “ ” 3 Press SET button. [EXAMPLE] “ ” flashes, “ ” lights. 4 Press ▲ or ▼ button. The display changes as below. Set as you like.“ ” ⇔ “ ” ~ “ ” ⇔ “ ” 5 Press SET button. Sleep timer has been set.If the Sleep timer is set when the unit stops, it st...

7 Selection of Weekly timer mode Up to four times of timer operation (ON timer/OFF timer) are available for each day of the week. Note : Set time every month in Weekly timer mode. 1 Press TIMER button. 2 Press ▼ button for four times. [ ] Æ [ ] Æ [ ] Æ [ ] Æ [ ] 3 Press SET button. “ ”is displayed i...

8 • If you select a day of the week for which setting have already been mode, all the timer numbers that have been set are displayed. And the details of the timer setting for the number which has “ ◄ ” mark is displayed. You can modify the selected setting by overwriting it. • In case you set ON tim...

10 HOW TO OPERATE IN SILENT MODE < WIRED REMOTE CONTROL > 1 In the timer mode, set the current day of the week and current time. See page 6 step 1 to 7 2 Press SET button for three seconds or more. The remote control goes into silent mode setting and the following is displayed. “ ” or “ ” (lig...

11 Press LOUVER button once, and the current status of louver is displayed. ADJUSTING WITH LOUVER BUTTON (Indoor unit with auto swing function) HOW TO ADJUST THE LOUVER < WIRED REMOTE CONTROL > The display during auto swing The display with the louver position fixed When you operate the swing ...

12 7 Press SET button (Fixing of the upper limit position) The upper limit position is fixed and the setting position is displayed for two seconds. Then proceed to lower limit position selection display. [EXAMPLE] “ ” (lit for two seconds) È “ ” (shows current setting) 8 Press ▲ or ▼ button (Selecti...

13 WHEN THE CHECK INDICATOR LIGHT (RED) FLASHES INSPECTION DISPLAY, FILTER SIGN, AIR CONDITIONER NUMBER, STANDBY, ROOM TEMPERATURE AND BACK UP DISPLAY < WIRED REMOTE CONTROL > The air conditioner stops in the event any trouble occurs. At the same time, the check indicator light flashes in red ...

14 ON – TIMER OPERATION < WIRELESS REMOTE CONTROL > 1 Press ON timer button. ON timer display blinks. 2 Press or button to adjust to AM 8:00. Displayed time will be changed by 10 minutes by pressing the buttons. 3 Press ON timer button. • ON timer display changes from blinking to steady lighti...

15 To fix the position of the swing louver Press AIR FLOW button when the louver position indication comes to the position where you would like to fix it. • Auto swing display stops at the position and then the swing louver stops and be fixed. NOTICE Press the button and auto swing display stops imm...

16 HOW TO MAINTAIN How to clean the Air Filter Clean the filter frequently for economical operation. Caution Before cleaning, stop the operation and turn off the power supply. Otherwise, it may lead to injury as fan inside rotates at high speed. Caution The stepladder used for removing and attaching...

17 HOW TO MAINTAIN Ceiling cassette −4 way Compact (600 x 600 mm)− (FDTC) 1. Slide the inlet grille levers in the direction of the arrow ( ), and open it downwards. 2. Turn the inlet grille stopper. 3. P u l l t h e f i l t e r t owa r d yo u . 4. When the filter is put in place, insert the filter i...

18 TROUBLE SHOOTING The phenomena mentioned below is not malfunction. TROUBLE SHOOTING Check the following items before requiring service. THE UNIT DOES NOT WORK AT ALL Is the power supply switch turned off? Is there a blackout or is the fuse blown? Is the leakage breaker activated? Dangerous. Immed...

19 The following button operations can be disabled. If the button is pressed, “ ” is displayed provided the button is disabled, and returns to original display. Consult your dealer for “ ” setting. 1 button 2 TEMP button 3 LOUVER button 4 MODE button 5 FAN SPEED button 6 TIMER button SETTING TO DISA...

AIR-CONDITIONING & REFRIGERATIONS DIVISION 3-1, Asahi, Nishibiwajima-cho, Kiyosu, Aichi, 452-8561, Japanhttp://www.mhi.co.jp MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONING EUROPE, LTD. 7 Roundwood Avenue, Stockley Park, Uxbridge, Middlesex, UB11 1AX, United KingdomTel : +44-20-7025-2750Fax : +44-2...