Mitsubishi NM-C110- Manuals

Instruction manual 7 Nethunter Multiserver Monitor This component is intended to monitor scenarios with more than one NHServer. Apart from device status, users can set event classification in order to be notified when specific events are received. Netunter control panel Startup application that help...

8 IP Cameras and IP Encoders IP camera/device Description NM-C110 Progressive Scan with Full-Duplex Audio NM-C130FD 540TV Lines and IP66 Vandal-Proof NM-C150SD PTZ Dome with 18x Optical Zoom NM-VS100 4CH Video Server with High Resolution and Bi-Directional Audio IPE100 Mini domo IP camera with optio...

10 System architecture overview Nethunter architecture is scalable and fully flexible, adjusted to any surveillance and video analysis business needs. Nethunter supports multiple clients, multiple DVR, NVR, NVVR and IP camera devices, plus other connected modules including display wall and multiple ...

12 On the following diagram, Nethunter is configured on a typical distributed installation with different network configuration options. Through the blue analog BNC connections analog cameras & devices are connected to a DVR or to a IP encoder device. The red ones are the IP network (LAN & g...

Instruction manual 13 2.4 First steps 2.4.1 Nethunter installation First of all be sure that the Windows® user has all Administrator permissions. There are some components that require administrative permissions. Run the Mitsubishi Nethunter installer. It is a self extraction file that includes all ...

Instruction manual 15 Network considerations: Nethunter is composed by different components that can run in different computers. You can refer to the following table to see which connectivity options you have for your network configuration, and which ones will be the recommended scenarios on your ne...

Instruction manual 17 2.4.4 Devices configuration Date and time All the system information is normally based to the operating system date and time. The DVR and NVR devices also include an internal clock and calendar that help the DVR scheduled tasks to run according the defined periods, and all the ...

18 On the other hand in the case of big installations it is recommended to use multiple network cards to diversify the traffic, isolate the recording flow from the display network consumption, or simply to increase the amount of supported cameras. Nethunter server is just a video proxy and central s...

Instruction manual 19 3 Nethunter client functionalities 3.1 Login to Nethunter When starting Nethunter client you must enter a Username and Password to enter the system. Each user can have different permissions in the application (see “users” section on settings chapter for more details). The Nethu...

22 3.3 Navigation components & toolbars 3.3.1 Explorer This component displays a navigation structure used in all the application to browse the different devices on the “logical” surveillance organization (the explorer structure is defined at the settings screen). This structure will show differ...

Instruction manual 23 3.3.3 Splits Selectable splits template for viewing video on the working area. The splits list is configured through the settings screen and is fully customizable by the administrator . This is considered a server component and any change will be visible for all the system user...

24 3.4 System monitor Currently-connected devices are listed showing their status. From this view, the system connectivity health is immediately displayed and monitored. When a device is disconnected, the status text will be displayed in red text to make it easier to be identified. The devices list ...

26 3.4.1 Context menu (right mouse button) A context menu is shown by clicking the right-button on any device in the list. The available options are:  Remote control. Users can control dvr functions remotely. When this option is selected , the dvr front panel will be shown in the bottom of the scre...

Instruction manual 27 3.5 Live This screen allows watching live video images (in real time) from any camera connected to the system. By some easy steps the splits working area can be populated with cameras. Some of the main functionalities include viewing cameras, “drag & drop” operations betwee...

30 In order to open the listen channel, users must select the option “Listen camera” in the Live context menu . When users don’t want to listen audio anymore, the “Stop listen” option must be selected. Refer to the specific device installation guide for getting the technical knowledge about how the ...

Instruction manual 31 3.5.6.1 Icons when broadcasting audio When any IP camera is broadcasting audio, it’s possible to show icons warning users about it. Beside them, the name of the camera is shown. In order to enable it, the value of an internal parameter has to be set to “True”. To do so, follow ...

32 3.6 Playback This section is used to play recorded video from any device (IP cameras in an NVVR, DVR or NVR). The screen layout is almost identical to the live one, with the capability to configure the splits layout and also to “drag & drop” cameras from the Explorer structure. You can “drag ...

Instruction manual 33  Download. Opens the quick downloads window. Read the “ Quick downloads ” section for more info. This option can be enable or disable by using NH user rights.  Reconnect DVR. Only available in Live.  Disconnect DVR. Only available in Live.  Restart IP camera. Only available...

34 3.6.2 Search & play controls The Playback control allows searching, zooming the playback time frame, navigating and playing forward and backwards any recorded video. The top level button controls are the same as a standard video or media player to allow seeking the video up to the beginning o...

Instruction manual 35 3.6.3 DVR Speed adjustment In case of playing DVR recorded video, you can change the playback speed at your convenience by moving the slide bar. Depending on the DVR model, network speed and Nethunter playback layout and configuration, the video may play faster than real-time. ...

36 3.7 Scheduling Scheduling screen is used to program two different types of tasks in the Nethunter server. The scheduled tasks will be based on Nethunter server time activity. It is important to know that these downloads are scheduled at Client PC level. Each PC could have different scheduled down...

Instruction manual 37 3.7.2 Time Synchronization (New time synchronization) This utility synchronizes the DVR internal clock (date/time) with the server date. It is recommended to schedule a periodical time synchronization task for DVR devices. It’s possible to synchronize multiple DVRs in the same ...

38 3.7.3 Scheduled tasks list content On the right hand there is a list of scheduled tasks. Each task has an entry on that list showing its main execution parameters and status. The schedule possible statuses are the following ones:  ”Stopped”: means that it is not yet executed (for the first time)...

Instruction manual 39 3.7.5 The download scheduling component In the case of a new download schedule, this other component is displayed (similar to the previous one) but with different behavior: 1. Choose the execution type (single or multiple). 2. Assign a task name to identify the task on the task...

42 3.8 Downloads A list of already-executed download tasks will appear on this screen. All the download tasks will be programmed from the Scheduling menu option (see previous section). The list of downloaded video appears in the working area. Each video has a brief description on the status field, s...

Instruction manual 43 3.8.2 Nethunter exports viewer Once a video is exported, a small application called “Viewer.exe” will also be recorded on the destination device. This application will show the export name and description, the exported period, and a list of all the exported cameras with its cor...

44 3.8.4 Quick downloads This option makes easier to schedule a download. It’s launched from the context menu in Live or Playback whenever the user has rights to do it. After clicking the Start button, that download will be inserted in the Scheduling list, waiting for its turn. 3.9 Events All the co...

Instruction manual 45 It is possible to filter events by its different parameters:  Devices explorer : You can select just one device, all the devices on a certain tree folder or choose to view the events of the full tree structure.  Dates : Through the top filter it is possible to choose the Star...

46 Export Exporting data will generate a comma separated values file with “csv” extension including all the events filtered on the screen. This file could be imported into multiple applications, including Microsoft® Excel. The exported file includes all the events information plus the related metada...

Instruction manual 47 - RecordingModeChangedManual - RecordingModeChangedSchedule DVR / NV100 - All events associated with a camera. 3.9.1 Context menu (right mouse button) By clicking right mouse button on the playback split, a menu is shown with the same options as in Playback . 3.9.2 Real-time ev...

48 3.10 Settings The following menu options are available on the settings screen as a tabbed menu options. General settings This option has some general configuration parameters that will affect your client behavior , device parameters and aesthetic options. Users Nethunter users and permissions mai...

Instruction manual 49 3.10.1 General The following options are available from the General settings: Language Choose the language you would like to use on your Nethunter client PC. Delete events older than This parameter deletes those previously retrieved events, older than the specified days. DVR de...

50 When this check is selected, camera name will be displayed in the opposite side of the splits and other extra information will be shown in the upper side. Text resize factor Users can adjust text size by means of it. The more on the right side, the bigger the text will be shown. Joystick device U...

Instruction manual 51 The “Manual connections” permission enables or disables the options “Restart IP camera”, “Connect DVR”, “Disconnect DVR”, “Connect all DVRs” and “Disconnect all DVRs” in the pop-up menu in Monitor. A user without this permission will not be able to perform all these actions. Th...

52 For each day of the week, it’s possible to set in what periods the real-time events will be received. There are two possible actions : Edit the periods for that day. When clicked, the following window is shown : The field “From” is the start time of the period. The format is hh:mm. Once the focus...

56 3.10.5 Maps The maps configuration option gives the operator all the flexibility to navigate between maps in any direction, including recursive flows. This option allows adding cameras into a map with a simple “drag & drop” operation. It is also possible to change the camera icon orientation ...

Instruction manual 57 3.10.6 Devices This section is aimed to add and remove devices, and change local device settings. These settings are stored on the NHServer database and are used by NHServer to manage the devices. On the other hand, the settings shown in Remote configuration (see the next secti...

58 3.10.6.2.1 DVR Some of the configuration parameters may differ between DVR models. Please, check the DVR users guide to clarify any parameter question or functionality behavior. Field Description ST EP1 IP address Neither type the new device IP address without spaces nor left side zeros. (correct...

60 The second step is started when users click on the button “Next” on the first step. The following screen is shown. The following parameters have to be filled in. Field Description Check status interval Select the time interval between status check (3-99 sec.). By default 3. Live Bandwidth (kbps) ...

Instruction manual 61 Options Description Show new cameras Checking this option, makes the system auto-discover all the IP cameras and IP encoders connected to the network. Add camera manually This option is used to add an IP camera manually. (see screen below) NVVR Cameras The IP Camera list. The a...

62 Replace camera option We can replace new found cameras by cameras that are already added to the NVVR device easily. This action is usually performed when a camera stops working and we want to replace it but keeping all its recordings and configuration. When a camera replaces another one, the old ...

Instruction manual 63 3.10.6.2.3 NV100E Users can discover NVVRs on the network or fill in the connection data manually. By pressing the button “Discover”, the system automatically discovers the available NV100E devices in the network. In the following screen there’s an example with one NV100E found...

64 the fields to fill when we creating a NV100E device are shown in the table below : Field Description ST EP 1 IP address Neither type the new NV100E IP address without spaces nor left side zeros. (correct: 192.168.0.10, incorrect: 192.168.000.010) Name Name of the NV100E Disabled Check this option...

66 3.10.7 Remote configuration Managing devices remotely from a client helps to configure any device with a centralized interface and a unique PC. Nethunter architecture does not allow the clients to have any direct interaction with final devices. Remote configuration allows you to load and save eac...

Instruction manual 67 3.10.8.2 Events and categories In this tab, end-users set the category for every event of each device. After clicking on any device, its available events will be shown in the list. After clicking on the event, the category is allowed to be clicked. When changed the category, th...

Instruction manual 69 Remote configuration : On the devices tree, the logged user will only see the granted recorders and those whose cameras are granted. Real-time events Only the events coming from granted devices to the logged user are shown. Only the granted cameras to the logged user are shown....

70 4 Nethunter server functionalities Nethunter server (NHServer) offers some important management functionalities. Its options are shown when moving the mouse over the tray icon. WARNING Some Windows® versions don’t show any tray icon for applications started as a service. If that’s your case, stop...

Instruction manual 71 5 Nethunter recorder setup (NVVR) 5.1 Nethunter recorder (NVVR) start-up Nethunter recorder (NVVR) is a Windows® process that can be started manually with the Nethunter control panel. The referenced recorder application is located by default in: C:\Program Files\ Nethunter\NVVR...

72 5.3 General NVVR configuration In this section we can configure all NVVR fields. See the table below for detailed information. Option Description NVVR Name This field is the name that any server will see when discovering new NVVRs. Recording path Path where NVVR recordings are stored. Recording d...

Instruction manual 73 5.4 NVVR alarms configuration In this section we can configure NVVR Alarms. The main window of the “Alarms” tab in NVVR Remote configuration screen displays a list with all the created alarms in the NVVR. The alarms list contains generic information for each alarm in the NVVR (...

Instruction manual 75 5.5 NVVR scheduling configuration In this section we can configure NVVR Scheduled tasks. The main window of the “Scheduling” tab in NVVR Remote configuration screen displays a list with all the created schedules in the NVVR. The schedules list contains generic information for e...

76 5.6 IP recording disk space calculation The following information is useful to calculate the amount of disk space necessary for your installation. This table is based in one IP camera in movement, recording in continuous mode with different parameters that may affect the compression and disk spac...

Instruction manual 77 SystemShutdown (SYS-02) System event Information about the system. SystemStart (SYS-03) System event Information about the system. SystemStop (SYS-04) System event Information about the system. SystemSettingsChanged (SYS-05) System event Name of the configuration parameter and ...

80 5.8 NVVR additional modules The NVVR device allows additional software to interact with it through its own API. In order to be able to use any additional module, a “Third-party integrators” license is needed.

Instruction manual 81 6 Nethunter Multiserver Monitor This module is able to monitor more than one NHServer. It’s suitable for multiserver architectures. However, it has some limitations so it can’t replace NHClient for the main admin tasks. WARNING At start-up, this module retrieves information fro...

Instruction manual 83 6.2 Devices information list This list shows devices information such as its server, name, ip address, location in the tree, live status, play status, recording state and the number of real-time events received. It is very similar to the option Monitor in NHClient. The pending ...

84 6.4.2 Servers NHServers can be added or removed in this tab. Moreover, a list containing all previous added servers is shown. Add new server : A new window is shown where all data for the new server can be updated. Users must fill in a name, the ip and the port. The button “Test connection” will ...

Instruction manual 85 6.4.3 Real-time events In this tab, all real-time events settings can be configured. It’s very similar to the option “ Real-time events classification ” in Settings  General in NHClient. The only difference is that the action “Show real-time live video” is not present here. Pl...

86 7 Appendixes 7.1 DVR resolutions according to the “DVR Decompression Size” parameter DVR M ODEL V ERY S MALL S MALL M EDIUM L ARGE 400 84x137 168x275 337x550 674x550 950/2500 84x142 169x284 339x568 678x568 4509/4516/5000 86x71 173x143 347x286 694x572 304/308/5716/TL4 Does not affect.

Instruction manual 87 7.2 Hardware requirements (IP Cameras system) The table below shows the hardware requirements (only on IP installations) needed for a Nethunter security system. Read it as a general guideline because there are many other aspects to take into consideration as bitrate, fps, if an...

Instruction manual 89 7.3 Installation use cases & recommendations Installation type Minimum recommended hardware Small IP/DVR installation 1 to 4 IP cameras and/or 1 Mitsubishi DVR Single PC, server + client architecture Intel Core 2 Duo 2 Gb RAM Standard graphics card with 256 Mb video memory....

90 7.4 Network requirements. Bandwidth calculation Internet B = C am era bit rat e (k bps ) B T = Bandw idt h needed bet w een c am eras and N VVR B W L AN = Bandw idt h needed bet w een Serv er & C lient s n = # of c am eras rec ording k = # of c am eras doing liv e m = # of c lient s c onnec t...

Instruction manual 91 B=1500kbps BW Up * =84000kbps Internet BW Up ** =8000kbps BW Dow n =42000kbps BW Dow n =50000kbps B=1000kbps Installation example * Co n si dering 2 remo te cl i ents d oing l i ve an d p l ay o f al l cameras ** Co n si dering 1 remo te cl ient d oi ng l ive an d p lay o f al ...

92 8 Notes 8.1 DVR management 8.1.1 DVR connection & Nethunter ports limitation Due to memory limitation, NHServer is not able to connect unlimited dvrs. Each dvr model has different memory requirements. Ask for help to your Mitsubishi distributor to manage more than around 100 dvrs. 8.1.2 On-De...

Instruction manual 93 8.3 Devices 8.3.1 IP Camera settings There is one parameter on the IP camera configuration that is not compatible with Nethunter. On the Video settings section, keep the parameter Profile to the default value “Simple Profile” in order to have the system working correctly. If th...

94 8.6 NVVR maintenance advices The NVVR is a video recording system. Due to the importance of the stored data, users should follow some steps to keep the system in good conditions :  The PC where the NVVR is running mustn’t be closed abruptly.  The NVVR process mustn’t be closed abruptly.  The h...

Instruction manual 95 1 – Stop NHServer 2 – Open the file NHIPserver.exe.config by using any text editor. This file is saved in the NH installation folder 3 – Change the value of the parameter “MitsubishiPortReconnectionManagerEnabled” to “False” 4 – Close and save the file NHIPserver.exe.config 5 –...

Instruction manual 97 8.10 Two NVVRs in the same remote site Note : This information is intended to be followed only by advanced technicians. If the NHServer and the NVVRs are installed in the same LAN, no especial configurations are needed. However, if there is a WAN between both modules and there ...