Mitsubishi LT-37132- Manuals

6 Important Information About Your TV Important Information About Your TV WARNING : This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSER...

Important Information About Your TV 7 TV Software Unauthorized Software Do not attempt to update the software of this TV with software or cards that are not provided by or authorized by Mitsubishi Digital Electronics America, Inc. Non-autho-rized software may damage the TV and will not be covered by...

8 Important Information About Your TV 8 Important Information About Your TV Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instruc-tions marked on the television. 1. Read, Retain and Follow All Instructions Read a...

Important Information About Your TV 9 Important Information About Your TV 9 Important Safeguards, continued 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or...

Stand Removal Instructions Before attaching the wall mount kit to the TV, be sure to connect all necessary cables to jacks on the back of the TV. After wall-mounting, these jacks will not be accessible. If you plan to connect a PC to the TV, before wall-mounting be sure to connect a DVI cable (or a ...

1 Television Overview Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Special Features of Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 TV Front Panel, Power Button and Indicators Front Control Panel . . . . . . . . . . . . . . . . . . . ....

12 Chapter 1. Television Overview 1. Standard Remote Control 2. Two AA Batteries 3. Small Remote Control (LT-46231 model only) 4. Two AAA Batteries (LT-46231 model only) 5. Two-Ended IR Emitter6 Two Cable Clamps (round) and One Cable Tie with Rivet. See “ Cable Management” on page 20. 7. TV Guide On...

14 Chapter 1. Television Overview Front Control Panel Cover Lift the cover to access the control panel buttons and INPUT 3 A/V jacks, as well as to use the NetCommand “learn” feature. Close the cover after NetCommand “learning” is complete. TV Front Panel, Power Button and Indicators Front Control P...

Chapter 1. Television Overview 15 TV Indicators POWER/TIMER Indicator LED Color TV Condition Additional Information None TV is powered off. Normal operation. Blue TV is powered on. Normal operation. Blue 1. TV just plugged into AC outlet. Wait until blinking stops before turning on (approximately 1 ...

16 Chapter 1. Television Overview Back and Side Panels 2. INPUT 1 and 2 Inputs (Audio and Video) INPUT 1 and 2 can be used to connect a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver, or other A/V device to the TV. INPUT 3 is a third set of jacks located in the front of the TV f...

Chapter 1. Television Overview 17 4. AVR OUT (Audio only) AVR OUT (AUDIO/VIDEO RECEIVER OUT) L/R jacks send analog audio of the program currently shown on the screen to an A/V surround sound receiver or stereo system. Digital audio from digital channels, FireWire® (DTVLink/IEEE 1394) devices and HDM...

18 Chapter 1. Television Overview Back and Side Panels, continued 7. PC-DVI AUDIO Use the PC-DVI AUDIO jacks in conjunction with the PC-DVI video input from a personal computer. These jacks allow you to send left and right analog audio from your computer to the TV. 8. PC-DVI Do not connect a TV vide...

Chapter 1. Television Overview 19 CableCARD™ Technology CableCARD is a nationwide system standard that allows your local cable TV provider to supply you with an access card customized to your account. This card allows your TV to receive, decode, and unscramble the premium digital channels included i...

20 Chapter 1. Television Overview Both TV models provide cable ties that help keep cables properly organized and connected, especially important when the swivel feature is used. For more information about the swivel feature, see Manual and Power Swivel in Chapter 1. Cable Management The TV comes wit...

2 TV Connections Connection Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Digital Video and Home Recording . . . . . . . . . . . . . . . . . . . . . . . 23 HDTV Cable Box or Satellite Receiver with Component Video . . . . 23 Standard Cable Box, Satellite Receiver, or...

22 Chapter 2. TV Connections Connection Types Video and Combined Audio/Video Connections These descriptions apply to TV video only and do not cover signals from personal computers. Picture Quality(most sources) Name Signal Type Figures (not to scale) Additional Information Best(carry high-definition...

Chapter 2. TV Connections 23 Digital Video and Home Recording The table below will help you decide which type of connection to use for digital video. Digital video comes to your home in a compressed state, whether received on recorded media (e.g., disc) or broadcast over the air, over cable, or via ...

24 Chapter 2. TV Connections Standard Cable Box, Satellite Receiver, or Other Device with S-Video Required: S-Video cable and left/right analog stereo audio cables. 1. Connect the cable from the outside cable or satellite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver. 2....

Chapter 2. TV Connections 25 Antennas with Separate UHF and VHF Leads Required: UHF/VHF combiner This is not included with the TV, but is available at most electronics stores. 1. Connect the UHF and VHF antenna leads to the UHF/ VHF combiner. 2. Push the combiner onto ANT 1/MAIN on the TV back panel...

26 Chapter 2. TV Connections VCR to an Antenna or Wall Outlet Cable Required: Two-way RF splitter, 3 coaxial cables, right and left analog audio cables, either S-video or video cable. These are not included with the TV but are available at most electronics stores. 1. Connect the incoming cable or an...

Chapter 2. TV Connections 29 DVD Player with Component Video Component video cables and analog audio cables are required. These are not included with the TV. 1. Connect the component video cables from Y PB PR VIDEO OUT on the back of the DVD player to the COMPONENT jacks on the TV back panel, match-...

30 Chapter 2. TV Connections Older Cable Box Required: 3 coaxial cables, one two-way RF splitter. These are not included with the TV. When this setup is complete, you can use the TV remote control, when programmed, to change channels on the cable box. Note: This connection is not recommended. The ot...

Chapter 2. TV Connections 31 IEEE 1394 Devices Compatible IEEE 1394 Devices Compatible A/V devices include some, but not all, cable boxes, D-VHS VCRs, A/V discs, and future products. Some devices may have IEEE 1394 connectors but are not compatible with the TV. Areas of compatibility to consider are...

32 Chapter 2. TV Connections IEEE 1394 Devices, continued Tips for Connecting IEEE 1394 Devices • Do not loop the last device in the chain back to the TV. When the device chain is looped, the TV may not be able to work with the other devices. • Place devices that have only a mechanical (two-posi- ti...

Chapter 2. TV Connections 33 IR Emitter NetCommand®/G-Link and TV Guide On Screen An IR emitter cable is included with the TV. The NetCommand system uses emitters connected to the IR EMITTER jack to control other devices such as VCRs, DVD players, cable boxes, and satellite receiv-ers. This control ...

34 Chapter 2. TV Connections Q. My VCR (or other device) does not have two sets of stereo audio outputs. How can I connect this device’s audio to both the TV and the A/V Receiver (AVR)? A. You need to connect the device to the TV and then make changes to the AVR setup. 1. Connect the VCR’s audio and...

3 TV Setup Guidelines for Setting Up and Using Your New Widescreen TV . . . 36 When You First Power On the TV . . . . . . . . . . . . . . . . . . . . . . . . 38 Using the TV’s Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 When You First Connect a Device . . . . . . . . . . . ...

36 Chapter 3. TV Setup Getting Started 1. Read the section entitled “Important Information About Your TV” starting on page 6. 2. Choose a location for your TV. • Allow at least four inches of space on all sides of the TV to help prevent overheating. Overheating may cause premature failure of the TV....

Chapter 3. TV Setup 37 Installing the Remote Control Batteries 1. Remove the remote control’s back cover by gently pressing in the tab and lifting off the cover. 2. Load the batteries, making sure the polarities (+) and (-) are correct. For best results, insert the negative (-) end first. 3. Snap th...

38 Chapter 3. TV Setup When You First Power On the TV Choosing a Language for Menus When you power on the TV for the first time, you can select either English or Spanish for all menus. You can later change the language through the Setup menu. Figure 1. The Welcome screen lets you change the menu lan...

Chapter 3. TV Setup 39 • In the TV Guide On Screen® system, the chan- nels displayed and the order in which they are displayed are independent of the TV’s channel memorization. Refer to the TV Guide On Screen Interactive Program Guide User’s Manual for detailed instructions on editing channels shown...

40 Chapter 3. TV Setup Set Day Select the day or days that the TV will turn on automati-cally. Press or to select Daily , Mon-Fri (Monday through Friday), or individual days of the week. Press to move to the Time box. Set Time With the hour highlighted in yellow characters, press repeatedly to slowl...

Chapter 3. TV Setup 41 CableboxCamcorderDVDDVD2DVR (digital video recorder, recordable DVD) GameHD Disc (high-definition disc) SatelliteVCR The name you assign here will appear in the Input Selection menu and can be changed later through the Input Name menu.If you select one of the device names chec...

42 Chapter 3. TV Setup When You First Connect a Device, continued 1. Connect the device to the TV with an IEEE 1394 cable first . 2. When the New 1394 Device screen appears with the Analog Connection check box highlighted, press ENTER to enter a check mark. See figure 7, New 1394 Device screen. 3. I...

Chapter 3. TV Setup 43 Chapter 3. TV Setup 43 NetCommand Specialized Device Keys Refer to this chart when “learning” device keys. Write in functions you assign to the F1 – F4 keys. * These are paired functions (e.g. Power and Power Off). When the original remote control uses a single button for both...

Chapter 3. TV Setup 45 Initial NetCommand® Setup, continued Review TV Connections You can verify TV connections during TV setup or at any time afterward using the Review screen. In the NetCommand menu, press to highlight Review and press ENTER to display the Review screen (see figure 11). To Turn Of...

TV Operation and Features Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Choosing a Program Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ChannelView™ Channel Listings . . . . . . . . . . . . . . . . . . . . . . . . 52 Status Display . . ....

50 Chapter 4. TV Operation and Features Remote Control Overview Figures 1 and 2, next page 1. Slide Switch: Selects the A/V device to be controlled by the remote control. Set the slide switch to TV for operation of the TV, NetCommand-controlled devices, and IEEE 1394 devices. Control of additional d...

Chapter 4. TV Operation and Features 51 23 29 10 1 2 3 4 789 25 24 27 28 26 17 18 11 12131415 5 6 16 19 20 22 21 Figure 1. Full Size Remote Control Sleep Timer Setting the Sleep Timer 1. Press SLEEP on the remote control. 2. Press SLEEP additional times to increase the time in 30- minute increments ...

52 Chapter 4. TV Operation and Features Choosing a Program Source NOTE: If your only viewing sources are connected to the ANT 1 and ANT 2 antenna jacks, you can switch inputs without the Input Selection menu. Press INPUT to switch between ANT 1 and ANT 2 . To verify which is the current source while...

Chapter 4. TV Operation and Features 53 Status Display The on-screen status display appears when you turn on the TV, change inputs, change channels, or press the INFO button on the remote control. The most common displays are shown below. Seldom or never do all the status indi-cators appear at the s...

54 Chapter 4. TV Operation and Features Split Screen Split Screen allows you to view pictures from two different sources at the same time. Split Screen is available when you have video sources connected to the TV in addition to connections on ANT 1 or ANT 2 . Operation Split Screen Operations Instru...

Chapter 4. TV Operation and Features 55 TV Inputs for Split Screen Combinations of picture sources you can view with Split Screen. Check marks indicate available combinations. Sub-Picture MainPicture ANT 1 ANT 2 INPUT COMPONENT HDMI (no 1080p) HDMI (1080p) IEEE 1394 ANT 1ANT 2INPUT * COMPONENT ** HD...

56 Chapter 4. TV Operation and Features TV Signals and Picture Formats This is a widescreen TV, also known as a 16:9 TV. This shape reflects the new types of picture formats available from HDTV and many DVDs. There are still many older style narrow-screen picture formats (for example, 4:3 aspect rat...

Chapter 4. TV Operation and Features 57 ��������������� ������������������������ ��������������� �������������� ���������� �������� ���������������������������� ������� �������������������������������������������������� ������������������������������������ �������� ������������� ���������� ������ ��...

5 TV Menu Settings 3D Graphical Menu System . . . . . . . . . . . . . . . . . . . . . . 60 Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 NetCommand Menu . . . . ...

60 Chapter 5. TV Menu Settings Menu Screens A picture (icon) is highlighted on the menu screen when selected with the directional arrows . You may then make changes within the menu or access sub-menus, if available. You can also open sub-menus from a button. Sometimes when you select a button, an au...

Chapter 5. TV Menu Settings 61 Setup Select English or Spanish for menus and on-screen displays. Memorize the available channels for the antenna or cable service connected to the ANT 1 and ANT 2 jacks. Set the TV’s internal clock either manually or have the TV set the clock automatically. Set the TV...

62 Chapter 5. TV Menu Settings Setup Menu See chapter 3, “TV Setup,” for use of the Setup menu. NetCommand Menu The features described in this section are available even if you have not performed NetCommand setup. See chapter 3, “TV Setup,” for options available for NetCommand-con-trolled devices. R...

Chapter 5. TV Menu Settings 63 IMPORTANT When you change the name of an input and then exit the menus, A/V memories are reset to default and NetCommand learning is erased. IMPORTANT It is possible to use the same name for more than one input. To avoid confusion, be sure to use different names for ea...

64 Chapter 5. TV Menu Settings Channel Menu Settings for the Channel Number Shown FAV Memory Banks Signal-Strength (digital channels only) Figure 7. Channel menu Antenna (Channel Menu) Select either 1 ( ANT 1 MAIN ) or 2 ( ANT 2 AUX ) as the antenna source for the channels you wish to edit. Channel ...

Chapter 5. TV Menu Settings 65 FAV (Channel Menu) The FAV feature lets you store groups of favorite channels in up to nine different FAV memory banks. For example, each household member can store favorite channels in their own bank or you can store groups of channels by content, e.g., news, sports, ...

66 Chapter 5. TV Menu Settings Captions Menu For analog channels, broadcasters can send either stan-dard closed captions or text service. Standard closed captions follow the dialogue of the characters on screen and display in a small section of the screen. Text-service closed captions often contain ...

Chapter 5. TV Menu Settings 67 Captions Menu, continued Size Select the desired font size. Large is the recommended font size. Color The available font colors are listed below. Text and back- ground cannot be set to the same color. White Yellow Black Green Magenta Cyan Red Blue Background You can ch...

68 Chapter 5. TV Menu Settings Parental Lock Menu The Parental Lock menu gives you control over three different types of parental controls. You must use a pass code to open this menu to enable/disable the lock options. The three parental controls available are: • Ratings (U.S. Ratings/Other Ratings)...

Chapter 5. TV Menu Settings 69 U.S. Ratings Menu Use this menu to turn U.S. rating restrictions on or off and to change the permitted rating levels. U.S. Restric-tions On/Off TV Rating and Supplemental Restrictions Restriction Hours Movie Rating TV Content Categories Figure 11. U.S. Ratings menu 1. ...

Chapter 5. TV Menu Settings 71 TV Ratings TV ratings apply to TV programs and made-for-TV movies. You can apply supplemental blocking to TV ratings based on the TV content categories described below. TV ratings are: TV-Y Youth. For children under the age of 7. TV-Y7 Youth 7 and older. TV-G General A...

72 Chapter 5. TV Menu Settings Audio/Video Menu Figure 13. Audio/Video Menu A/V Memory Reset A/V Memory Reset allows you to reset a specific input’s A/V settings to the original factory settings. Highlight the box and press to select the input name. Next press ENTER . The audio settings of Balance ,...

Chapter 5. TV Menu Settings 73 • To receive the best fidelity with music programs, change this setting to Off . • When connecting to an A/V receiver, set Level Sound to Off and turn off the TV speakers to send full dynamics to the A/V receiver. Analog-Only Audio Settings You can set analog-only audi...

74 Chapter 5. TV Menu Settings Audio/Video Menu, continued Video Settings Enter the video adjustment mode using either the Audio/ Video menu or the VIDEO key. Press the VIDEO key repeatedly to cycle through the video options to the one you want to change. Use to change settings. Note: A slider displ...

Chapter 5. TV Menu Settings 75 Audio/Video Menu, continued ◊ Video Noise: Reduces minor noise (graininess) in the picture. Use the Low setting with good-quality signals. Use High with poor-quality signals. Turn off to leave the picture unaltered. ◊ Back Light: Lets you adjust the TV’s back-light pea...

6 NetCommand Functions NetCommand-Controlled Devices and the Input Selection Menu . . 78 NetCommand-Controlled Recording . . . . . . . . . . . . . . . . . . . . . . 79 Using IEEE 1394 Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

78 Chapter 6. NetCommand Functions NetCommand-Controlled Devices and the Input Selection Menu For devices under NetCommand control, the Input Selec-tion menu allows you to: • Select the device for viewing• Switch audio between the TV speakers and A/V receiver • Power compatible devices on or off• Ve...

Chapter 6. NetCommand Functions 79 NetCommand-Controlled Recording This section describes making recordings independently of the TV Guide On Screen system. For instructions on setting up recordings using TV Guide On Screen, see the separate TV Guide On Screen® Interactive Program Guide User’s Manual...

80 Chapter 6. NetCommand Functions Immediate Recording from ChannelView 1. Press INPUT to open the Input Selection menu. High- light an ANT 1 or ANT 2 program source and press ENTER . 2. Press GUIDE to open the ChannelView channel guide for the current antenna input. 3. Use to highlight the channel ...

Chapter 6. NetCommand Functions 81 Default Digital (Recording) Device If you have more than one digital recording device con-nected, this option lets you specify which to use as the default. The device specified here is the digital record-ing device to use when initiating a recording with the (RECOR...

82 Chapter 6. NetCommand Functions Direct VCR Recording from an Antenna or Cable Source When your VCR is the current device, ( RECORD ) on the TV’s remote control functions the same as the record button on the VCR’s remote control or front panel. To record directly from antenna or cable: 1. Press IN...

Chapter 6. NetCommand Functions 83 Using IEEE 1394 Devices IEEE 1394 Devices and the Input Selection Menu When you connect an IEEE 1394 device to the TV network and power it on, the new device is automatically detected. Some non-audio/video or incompatible IEEE 1394 devices, such as personal compute...

84 Chapter 6. NetCommand Functions The TV Remote Control and IEEE 1394 Devices • For satellite receivers and cable boxes, you may also be able to use the numbers or other additional buttons. • For an IEEE 1394 cable box or satellite receiver, you can also try using the CABLE/SAT position of the TV r...

Chapter 6. NetCommand Functions 85 Copying A/V Disc Recordings Tracks you record to disc may have copy restrictions assigned to them. To learn a track’s copy status, high-light the track in the Track List and press INFO . Tracks are assigned one of these ratings: Copy Free (or no status shown) No co...

Using the TV with a Personal Computer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Video Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Connecting a Computer to the TV . . . . . . . . . . . . . . . . . . . . . . . ...

88 Chapter 7. Using the TV with a Personal Computer Setup 1. See the TV specifications in Appendix B to confirm that your computer video signal is compatible with the TV. 2. Note whether the computer supplies a digital or analog video signal. You will need this information during the setup procedure...

Chapter 7. Using the TV with a Personal Computer 89 Computer with HDMI Digital Monitor Output Required: HDMI-to-DVI cable or an HDMI cable with an HDMI/DVI adapter, stereo audio cables If the computer’s audio output is a single mini jack, a mini audio-to-RCA-male “Y” adapter cable is also required. ...

Chapter 7. Using the TV with a Personal Computer 91 �� �� �� �� �� �� Figure 5. Computer resolution, XGA selection Adjusting Image Resolution Your Mitsubishi TV can display resolutions from standard VGA (640 x 480) through 1920 x 1080 signals at a refresh rate of 60 Hz. The resolution of 1920 x 1080...

92 Chapter 7. Using the TV with a Personal Computer 92 Chapter 7. Using the TV with a Personal Computer Computer Signal As Displayed on TV Screen Format 16 X 9 Standard 4 X 3 Standard Zoom VGA 640 X 480 WVGA 848 X 480 SVGA 800 X 600 WSVGA 1064 X 600 XGA 1024 X 768 PC 720p 1280 X 720 WXGA 1365 X 768 ...

Appendices Appendix A: Bypassing the Parental Lock . . . . . . . . . . . . . . . . . 95 Appendix B: Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Appendix C: Programming the Remote Control . . . . . . . . . . . . . . 99 Appendix D: Troubleshooting . . . . . . . . . . . . ...

Appendices 95 Bypassing the Parental Lock After you set the lock, you must use your pass code to view a locked program, view the locked TV, cancel the lock, or enter the Parental Lock menus. If you forget your pass code, you can view the locked TV without entering your pass code. When you are prompt...

96 Appendices 96 Appendices This page intentionally left blank

Appendices 97 Appendices 97 Appendix B: Specifications Picture Technology LCD Screen Color active matrix LCD 1920 x 1080 dots Backlight LT-37132: Direct Type 18 CCFTs ; LT-46231: Direct Type 24 CCFTs Reception Channel Frequency Recep-tion Over-the-Air: VHF 2–13, UHF 14–69Analog Cable: 1–125Digital C...

Appendices 99 This appendix explains how to program the TV’s remote control to operate other A/V devices. This is distinct from NetCommand “Learning.” To summarize: the TV’s remote control can be made to operate other devices by two dif-ferent methods: • Remote Control Programming: you must move the...

Appendices 101 Audio AmplifiersBrand Code Acurus 30765 Adcom 31100, 30577 Altec Lansing 31742 Aragon 30765 Bel Canto Design 31583 Bose 30674 Carver 30892 Classe 31462, 31461 Curtis Mathes 30300 Durabrand 31561 Elan 30647 GE 30078 Harman/Kardon 30892 JVC 30331 Klipsch 30765 Left Coast 30892 Lenoxx 315...

102 Appendices A/V Receivers Brand Code Audiotronic 31189 Audiovox 31627, 31390 B & K 30840, 30820, 30701 Bel Canto Design 31584 BK 30702 Bose 31253, 31229, 30639 Brix 31602 Cambridge Soundworks 31477 Capetronic 30531 Carver 31289, 31189, 30189, 30121 Coby 31263 Curtis 30797 Delphi 31414 Denon 3...

Appendices 109 Appendix D: Troubleshooting Reset Name When to Use How to Use Resulting Action Demo Mode Turn-Off To turn off the retail demo mode slide show. 1. While viewing the TV, press MENU to display the TV Main menu with the Setup icon highlighted. 2. Press ENTER to display the Setup menu. 3. ...

110 Appendices Reset Name When to Use How to Use Resulting Action Parental Lock Pass Code To change your Parental Lock Pass Code This information is listed on the cutout page in Appendix A. Please refer to that page. Allows a new code to be established. Front-Panel Lock Release To re-enable the fron...

Trademark and License Information 117 Trademark and License Information 117 LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES...

118 Trademark and License Information 118 Trademark and License Information Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electroni...

119 119 MITSUBISHI LCD FLAT PANEL HDTV LIMITED WARRANTY MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants to the original purchaser of this LCD Flat Panel HDTV that if purchased from an authorized MITSUBISHI Audio/ Video Dealer, should it prove defective by reason of improper workmanshi...

120 Index Index A A/V Discs 85A/V Memory Reset. See Reset A/V Receiver Adding NetCommand Control 46Connecting 29 A/V Reset. See Reset Adjust Keys (Up/Down/Left/Right) 50, 60 Anamorphic Picture Format 81 DVD Definnitions 56Playback 81 Antenna Adjusting and the Signal Strength Meter 64 Connecting 25 An...