Mitsubishi HL650U- Manuals

EN-5 1 Start the Projector-Control Device Installer.• S e l e c t [ S t a r t ] - [ A l l P ro g r a m s ] - [ M i t s u b i s h i ] - [Mitsubishi Projector - Control Device Installer] (in the case of Windows ® XP). 2 Click the Search button. • Mitsubishi projector is recognized. (Note)When Mitsubis...

EN-6 5 Select [Obtain an IP address automatically] and click Next. 6 Click Next. • Check that the options are marked with check-marks as shown on the right. Keep them un-changed for normal use. 7 Click Assign. 8 Click Finish. 9 Click the Search button. • Check the IP address. When using a DHCP serve...

EN-7 5 Select [Assign a specifi c IP address] and click Next. 6 Enter a fi xed IP address (for example, 192.168.0.1) and click Next. (Note)D o n o t u s e 0 o r 2 5 5 f o r t h e l a s t d i g i t o f t h e I P address. 7 Click Assign. 8 Click Finish. 9 Click the Search button. • Check the IP addres...

EN-8 1 Start the Projector-Control Device Installer. • S e l e c t [ S t a r t ] - [ A l l P ro g r a m s ] - [ M i t s u b i s h i ] - [Mitsubishi Projector - Control Device Installer] (in the case of Windows ® XP). 2 Press the + buttons on the left pane to expand the tree structure until the IP ad...

EN-9 1 Enter “0” and press the Enter key. 2 Enter a new password (example: “proj2000”) and press the Enter key. (Default password is MITSUBISHI.) (Note)Use single-byte alphanumeric characters only. Setting the password (Password Setup) 1 Enter “1” and press the Enter key. 2 Enter “0” for English or ...

EN-10 1 Enter “3” and press the Enter key. 2 To enable the e-mail notifi cation function of Projector-View, enter 1 and press the Enter key. (Default is OFF (0).) (See pages 12 - 15 for ProjectorView function.) Setting the LAN control (LAN-Controlled Mode) 1 Enter “5” and press the Enter key. • When...

EN-11 1 Enter “9” and press the Enter key. 2 The setting screen is shaded and the setting process completes. Save and exit • Because the password, display language, LAN control, and PJLink ™ certifi cation are set using the telnet function, you can also set them on the command prompt window of the p...

EN-12 1 Start the Projector-Control Device Installer.• S e l e c t [ S t a r t ] - [ A l l P ro g r a m s ] - [ M i t s u b i s h i ] - [Mitsubishi Projector - Control Device Installer] (in the case of Windows ® XP). 2 Expand the tree structure on the left pane until the IP address you set appears. ...

EN-14 ProjectorView (continued) VIRTUAL REMOTE controller Put a checkmark in the box of the Virtual remote enabled on the ProjectorView main screen, and click the VIRTUAL REMOTE button. The following Virtual Remote window appears. For the functional descriptions of each button, see the user manual o...

EN-15 Initial setting To load information on the projector such as model name and lamp operating time, set the projector data in advance. Click the SETUP button on the ProjectorView main screen. The Projector Setup screen appears. Enter data according to the description of each setting item. (Note) ...

EN-16 Support for the PJLink™ function This projector supports standard protocol PJLink™ for projector control and you can control and monitor projector’s operations using the same application among projectors of different models and different manufacturers. To use this function, perform the followi...

EN-17 [Notes on Instant Shut Down] Instant shutdown of the projector during control using the network function may cause ProjectorView to fail to display data correctly. • The operating time and temperature may not be displayed correctly. In this case, close the browser, recognize this projector usi...