Mitsubishi GFC-2- Manuals

Page 2 - ADVANCED TECHNOLOGIES; Comfort; Ecology

2 GFC-L3 GFC-L3 The Best Helper to Enhance the Efficiency of your Modern Factory ADVANCED TECHNOLOGIES Comfort • Smooth riding comfort• Universal design• Creating comfortable building environments Safety • Ensuring safety during boarding and exiting and at the time of an emergency • Developing highl...

Page 3 - Specification

3 4 GFC-L3 GFC-L3 CAR DESIGNS ENTRANCE DESIGNS Elevator color shown is slightly different from actual tone. Elevator color shown is slightly different from actual tone. Type FCD-B Type E-102 (Standard) Type FCD-A Car Type FCD-A FCD-B Lighting Fluorescent lighting through embed milky-white resin flat...

Page 4 - FINISH COLORS AND PATTERNS; CONVENIENCE AND SAFETY; Durable Vinyl Tiles

False Call Canceling- Car Button Type (FCC-P) If the wrong car button is pressed, it can be canceled by quickly pressing the same button again twice. Non-Service to Specific Floors- Car Button Type (NS-CB) [Optional] To enhance security, service to specific floors can be disabled using the car opera...

Page 5 - SIGNAL FIXTURES; Car Operating Panel

7 8 GFC-L3 GFC-L3 SIGNAL FIXTURES CBV1-C710E Selecting button type Input the number corresponding to the button type as the fourth digit(shown as # in this brochure) in the car operatingpanel type (CBV#-XXXX) and hall button type (PIV#-XXXX or HBV#-XXXX). *1 Segment LED indicators cannot display som...

Page 6 - INSTALL ATION DRAWINGS

R6 R5 R4 R1 R2 R3 * The above installation drawings ( 2:1 roping ) are only applicable for rated capacity 1500~2500kg. * The above installation drawings ( 1:1 roping ) are only applicable for rated capacity 750~1000kg. CONTROL PANEL AM Access door 1200 × 2000 BM Power supply for lighting(by owner) T...

Page 7 - SUPPLY SCOPE; Maximum Number Stops,Travel and Minimum Floor Height

11 12 GFC-L3 GFC-L3 SUPPLY SCOPE 1500kg~2500kg (90,105m/min) Rated capacity (kg) Door type Rated speed (m/min) Entrance width JJ Dimensions (mm) Reaction loads (kN) Car internal (AA×BB) Minimum hoistway (X×Y) Minimum machine room (AM×BM) Machine room Pit R1 R2 R3 R4 R5 R6 P1 P2 1500 2S 90 1700 2200×...

Page 8 - Power Feeder Data; Vertical Dimensions

Capacity (KG) Speed (m/min) Capacity of Power Supply (KVA) Breaker Current Rating in M/R (200V) (400V) 750 60 5 30A 15A 750 90 7 50A 30A 750 105 8 50A 30A 1000 60 7 40A 20A 1000 90 10 60A 30A 1000 105 11 75A 40A 1500 45 8 50A 30A 1500 60 10 60A 30A 1500 90 14 100A 50A 1500 105 16 100A 50A 2000 45 10...

Page 9 - ENTRANCE L AYOUT; S Doors

15 16 GFC-L3 GFC-L3 ENTRANCE L AYOUT * For other door types and JD dimension, please contact our local agents for detail. 2S Doors (E-102) (2-panel side sliding doors) 3S Doors (E-202) (3-panel side sliding doors) 2CO Doors (E-202) (4-panel center opening doors)

Page 10 - FEATURES

17 18 GFC-L3 GFC-L3 FEATURES Feature Description  Operation System (1C-2BC) 1 CAR Selective Collective The system consists of call buttons in the car, and a riser of up and down destination floor buttons installed at each elevator hall (single button at terminal floors), which connect electrically ...

Page 12 - MEMO; NOTES ON INSTALL ANTION PL ANNING

21 22 GFC-L3 GFC-L3 MEMO NOTES ON INSTALL ANTION PL ANNING Elevator Site Requirements • The temperature of the machine room and elevator shall be below 40°C.• The following conditions are required for maintaining elevator performance. a. The relative humidity shall be below 90% on a monthly average ...

Manuals:

User Manual Mitsubishi GFC-2

Summary

Mitsubishi Manuals