Page 2 - Airconditioning equipment!; Safety instructions; Working with refrigerant; Do not eat, drink and smoke when handling refrigerant; Qualified Personnel, Training and Safety-Oriented Working
Read this user manual carefully before installation and operation of this equipment. Store this manual together with the other user and technical manuals of the Airconditioning equipment!
Page 3 - Impermissible Operation
The electric connections must always be made with suitable cables, and it must be ensured that the cables are properly secured to prevent any mechanical forces on the cables from affecting the cable connections inside the machine. A faulty cable connection can develop heat inside the machine and/or ...
Page 4 - Content
Content 1 Descripton FD-PAC / Warranty exclusion 5 2 Technical specifications 6 3 Installation 12 3.1 Safety instructions 12 3.2 Installation FD-PAC 14 3.3 Lay out plate heat exchanger 15 3.4 Lay out heat exchanger 16 3.5 Lay out electrical wiring diagram 17 4 Troubleshooting 18 - 4 -
Page 6 - Technical specifications
2. Technical specifications Model FD-PAC / FDC71VN Model Technical specifications Control kit Outdoor unit FD-PAC FDC71VN Nominal coolingcapacity (1) W 7100 (3200 ~ 8000) Nominal heating capacity (1) W 8000 (3600 ~ 9000) Power source 1 fase, 220/230/240V, 50Hz, N, PE Opera tio n da ta ( 3 ) Cooling ...
Page 12 - SAFETY PRECAUTIONS; Installation should be performed by the specialist.; If the refrigerant contacts the fire, toxic gas is produced.; Install the unit in a location that can hold heavy weight.; Improper fitting may cause abnormal heat and fire.
3. Installation 3.1 SAFETY PRECAUTIONS • Read the “SAFETY PRECAUTIONS” carefully first of all and then strictly follow it during the installation work in order to protect yourself.The precautionary items mentioned below are distinguished into two levels, WARNING and CAUTION. WARNING: Wrong installat...
Page 13 - Improper repair may cause water leakage, electric shock or fire.; Turn off the power source during servicing or inspection work.; It could cause electric shock, unit failure and improper running.
• Make sure there is no dust or clogging on both the plug and the socket nor loose connection of the socket before plugging, and plug in securely to the end of the blade. Accumulation of dust, clogging on the socket or plug, or loose installation of the socket could cause electric shock and fire. Re...
Page 15 - Lay out plate heat exchanger
Page 16 - Lay out heat exchanger
Page 17 - Lay out wiring diagram