Mitsubishi CP8000DW- Manuals

2 In the interest of safety, please observe the following precautions: POWER REQUIREMENT This Digital Color Printer is designed to operate on 120V AC 50/60Hz in U.S.A. and Canada, 220V-240V AC 50/60Hz in Europe.Never connect to any outlet or power supply having a different voltage or frequency. WARN...

3 CONNECTIONS OTHERS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING INSTALLATION LOCATIONS MAINTAIN GOOD VENTILATION Ventilation slots and holes are provided on the rear and both sides of this unit. Place the unit on a hard and level surface andlocate at least 10cm (4 inches) from walls to in...

4 OTHER CAUTIONS Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to extremelylow or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images. NOTE:YOUR UNDERSTANDING IS REQUESTED FOR THE L...

5 CONNECTIONS OTHERS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING SPECIAL FEATURES SPECIAL FEATURES 4 PRINT SIZES ARE AVAILABLE ACCORDING TO THE PURPOSE 4 printing sizes, W size (max.152 x 229 mm), X size (max.127 x 178 mm), L size (max.152 x 102 mm) and M size (max.127 x 89mm), are selecta...

6 UNPACKING UNPACKING DIG ITAL CO LO R PR INTER POWER CORDS INK CASSETTE PAPER ATTACHMENTS SPACER-M PRINTER DRIVERS DUST BOX OPERATION MANUAL SCSI TERMINATOR Take the printer out of the box by the following procedures. Make sure to check the contents. 1 1 1 1 1 Open the top of the box. 2 2 2 2 2 Rem...

7 CONNECTIONS OTHERS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING FEATURES & FUNCTIONS 1 1 1 1 1 DOOR Open this door when installing print paper or ink sheet.Press D OPEN button on the top to open the door. 2 2 2 2 2 DUST BOX Holds the paper chips which comes out of the print outlet.Set...

8 AC LINE SCSI ID POWER SCSI SCSI 4 2 1 6 7 5 3 1 1 1 1 1 SCSI PORT Used to connect this printer to a device with SCSI interfacesuch as personal computers. See page 9. 2 2 2 2 2 SCSI ID SWITCH Used to set the SCSI ID number of the connected device.See page 9. 3 3 3 3 3 USB TERMINAL Used to connect t...

9 CONNECTIONS OTHERS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING CONNECTIONS CONNECTION WITH SCSI DATA SIGNAL EQUIPMENT 2 2 2 2 2 SETTING SCSI ID SWITCH Set the SCSI ID switch on the rear panel according to the personal computer connected. • Select the ID number among 1 to 6. • Turn the ar...

11 CONNECTIONS OTHERS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING PARALLEL DATA SIGNAL ALLOCATION • Connector ............ JD36SL equivalent (36-pin)• Input level ............. TTL• Parallel input connector terminal Signal allocation (Signal : Compatible) Pin No. Return pin No. Signal From...

15 CONNECTIONS OTHERS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING BEFORE OPERATION Before printing, 1 1 1 1 1 Install ink sheet to this unit. (pages 15-16) 2 2 2 2 2 Install print paper to this unit. (page 17-18) PRINT PAPER AND INK SHEET When using this unit for printing, make sure to use...

16 BEFORE OPERATION NOTE If the ink sheet is used up, take out the print paper first. Then retrace the steps 1 to 3 to change the print paper and ink sheet. 2 2 2 2 2 INSTALLING THE INK CASSETTE 1 1 1 1 1 Press OPEN button to open the door. 2 2 2 2 2 Set the ink cassette with ink sheet into the comp...

17 CONNECTIONS OTHERS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING INSTALLATION OF PRINT PAPER After setting the ink cassette, install the print paper to the unit. Do not install the print paper without setting the ink cassette. 1 1 1 1 1 Put the supplied paper attachments to both sides of ...

18 BEFORE OPERATION LED lamp PAPER INSTALLATION button FEED & CUT Roller Print paper 3 3 3 3 3 Remove the sticker, and insert the print paper between rollers asshown right. • Remove the sticker before inserting print paper between rollers. Make sure to insert the paper straight. • Send the print...

19 CONNECTIONS OTHERS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING USAGE AND KEEPING OF PAPER SHEET SET 2 2 2 2 2 BEFORE PRINTING • Fingerprints or dust on the paper’s printing surface may degrade print quality and cause paper jams. When not cutting the paper by FEED & CUT procedure whi...

21 CONNECTIONS PREP ARA TION TROUBLE- SHOOTING FEA TURES PRECAUTIONS OTHERS ERROR MESSAGES & COUNTERMEASURES INDICATION ON THE FRONT PANEL AND COUNTERMEASURES 2 If for some reason, printing is not possible or error occurs during printing, the indicator on the front panel will be illuminated or l...

22 OVERCOMING PAPER JAMS 1 1 1 1 1 Press OPEN button to open the door. Make sure that the unit is powered ON when opening the door. When it is not working, turn off the power once. Then press OPEN button again. 2 2 2 2 2 Remove the ink cassette. Push down the ink cassette as shown by an arrow 1 and ...

23 CONNECTIONS PREP ARA TION TROUBLE- SHOOTING FEA TURES PRECAUTIONS OTHERS BEFORE CALLING FOR SERVICE Symptom No power The image is not printed. The image cannot be printed to the possible print area. The image can not be transferred. COPY button does not work. The personal computer does not recog-...

24 1 1 1 1 1 Press OPEN button to open the door. 2 2 2 2 2 Remove the ink cassette. 3 3 3 3 3 Take out the print paper. 4 4 4 4 4 Clean the ink sheet sensor. Wipe the circled part in the right figure. Wipe the dust gently with cotton buds etc. which are soaked in a small amount of alcohol. 5 5 5 5 5...

25 CONNECTIONS OTHERS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING SPEC & OPTIONS SPECIFICATIONS Class Digital Color Printer Model CP8000DW Printing method Sublimation Dye Thermal Transfer line print 3 color faces progressive printing (yellow, magenta and cyan) and surface lamination Pr...