Page 2 - PROTECTIVE MEASURES
1 2. Precautions In the interest of safety, please observe the following precautions: POWER REQUIREMENT This Colour Video Copy Processor is designed for operation on 220V-240V, 50Hz AC. Never connect to any outlet or power supply having a different voltage or frequency. WARNNG: THIS APPARATUS MUST B...
Page 4 - SAFETY CHECKS
3 This product is to be employed with medical equipment, just for reference purpose, not for medical diagnostic purpose. CAUTION ON RELOCATING When transporting this unit, make sure it is not likely to be subjected to impacts. They can be a prime cause for damage. Further, make sure to disconnect th...
Page 5 - Preparations before operation; Installing the print paper and ink cassette; Install the print paper.; Stored position; Remove the fixed screw on the printing unit.; There is a fixed screw at the bottom of the printing unit.
4 3. Preparations before operation 1 1 1 1 1 Removing the fixed screw on the printing unit and protective cushion Pages 4-5 2 2 2 2 2 Installing the print paper and ink cassette Pages 5-8 • Install the print paper. • Install the cassette with ink sheet. Attention: • Keep the removed fixed screw by s...
Page 6 - Remove the protective cushion.; Attention; Installing print paper and ink sheet; Installation procedure of print paper
5 Remove the protective cushion. Note: Unplug the power cord from outlet for safety. 1 Press the OPEN button on the front panel. Printing unit advances to the front. Attention • Do not touch the thermal head. Fingerprints or dust on the thermal head will degrade the print quality. 2 Pull out the pro...
Page 7 - INCORRECT; Installing the ink sheet
6 3 Insert the print paper between roller 1 and 2. 4 Insert the edge of the print paper to roller 3. Be sure to insert the paper straight. 3. Preparations before operation 5 Feed the print paper through the exit slot straight with your hand. 6 Pull the print paper to eliminate slack. Note: If too mu...
Page 9 - Print paper and ink sheet; Precautions before printing
8 Print paper and ink sheet Attention • Listed below is the print paper and ink sheets available for the CP710E. Make sure you use only these consumables. Ink sheet Product name Ink sheet size Number of prints Usage PK700S S size 200 sheets For 3 color use PK700L L size 125 sheets For 3 color use Pr...
Page 10 - Connection with external equipment; Explains how to connect with a monitor.; Connection with Monitors; Connect with the necessary signal equipment.; To S-VIDEO IN terminal; Monitor
9 4. Connection with external equipment The functions of this unit can be set with the menu screens displayed on the monitor. 1 1 1 1 1 Connection with Monitors Page 9 Explains how to connect with a monitor. 2 2 2 2 2 Connection with VIDEO/S-VIDEO (Y/C separate VIDEO) signal equipment Page 10 Explai...
Page 11 - VCP; VIDEO signal
10 4. Connection with external equipment (VIDEO/S-VIDEO) 2 2 2 2 2 Connection with VIDEO signal, S-VIDEO (Y/C separate VIDEO) signal equipment When connecting the unit with another equipment, make sure to set the power of each equipment to "OFF". S-VIDEO REMOTE AC LINE VIDEO 1 2 ,, ,, P U S ...
Page 12 - Features and functions; Explains input/output terminals on the rear panel.; REMOTE CONTROL; Explains the functions of the buttons on the remote control.; FRONT PANEL
11 5. Features and functions 1 1 1 1 1 FRONT PANEL pages 11 - 12 Explains the buttons and terminals, etc. on the front panel. 2 2 2 2 2 INSIDE OF PRINTING UNIT page 12 Explains the installation of the ink cassette and print paper inside the unit. 3 3 3 3 3 REAR PANEL page 13 Explains input/output te...
Page 13 - Print outlet; INSIDE OF PRINTING UNIT; Ink cassette compartment
12 5. Features and functions 6 6 6 6 6 Monitor button [MONITOR] Switches the display on the monitor. When this button is pressed, the picture on the monitor screen switches between the picture of the input signal (source image) and the memorized image. 7 7 7 7 7 MEMORY button [MEMORY] This enables m...
Page 14 - REAR PANEL; Potential equalization connector; Refer to page 10 for connection.
13 3 3 3 3 3 REAR PANEL 5. Features and functions Potential equalization connector This is used to equalize the potential of the equipment connected to the unit. For details, refer to the installation instruction of the equipment to be connected. 1 1 1 1 1 S-VIDEO SIGNAL INPUT/OUTPUT TERMINALS [S-VI...
Page 15 - COLOR IMAGE ADJUSTMENT button [COLOR ADJUST]; This button is used to set the number of prints. Press
14 4 4 4 4 4 REMOTE CONTROL 5. Features and functions 1 1 1 1 1 COLOR IMAGE ADJUSTMENT button [COLOR ADJUST] When this button is pressed, a screen for adjusting the video image is displayed. Use this button to set the various functions of this unit. (The menus displayed on the monitor is used to set...
Page 16 - PRINT button; Programs cannot be changed during printing.; SHIFT buttons; Press this button to display the main menu.
15 5. Features and functions 8 8 8 8 8 PRINT button [PRINT] Press this button to print the image memorized by the MEMORY button. 9 9 9 9 9 PROGRAM button [PROG.] Press this button to select the images memorized in the program of this unit and various settings such as printing. Each time this button ...
Page 17 - One picture image can be printed on one sheet.; S size printing; Printing; Explains storing an image in the memory and printing; Continuous printing; Explains the continuous printing of the same image.
16 6. Printing procedures (Basic prints) One picture image can be printed on one sheet. S size printing L size printing 1 1 1 1 1 Printing Pages 17 - 23 Explains storing an image in the memory and printing 2 2 2 2 2 Continuous printing Page 24 Explains the continuous printing of the same image.
Page 18 - Selecting FIELD or FRAME; • Select the FRAME mode for a high resolution still image printing.; FIELD image
17 6. Printing procedures (Basic prints) 1 1 1 1 1 Printing Selecting FIELD or FRAME 1 Press the FIELD/FRAME button on the remote control to select FIELD or FRAME. • Select the FRAME mode for a high resolution still image printing. Select the FIELD mode for a picture of quickly moving objects. • Whe...
Page 19 - Selecting input signal
18 6. Printing procedures (Basic prints) Selecting input signal • Select " VIDEO " or " S-VIDEO " according to the input signal. • The input signal can be set on the menu screen displayed on the monitor. • It is not necessary to select the input signal every time you print unless the...
Page 23 - MEMORY PAGE
22 6. Printing procedures (Basic prints) MEMORY PAGE The following image memorization function is available. When storing one image in the memory: • When FRAME is selected, one image can be memorized in FRAME mode. • When FIELD is selected, each one image can be memorized in FIELD A and FIELD B. One...
Page 24 - Image memorizing with PAGE INC (Page Increment) function; Note; Storing images in memory / Printing the images
23 6. Printing procedures (Basic prints) Image memorizing with PAGE INC (Page Increment) function PAGE INC (Page Increment) : When the “automatic memory page turning” function is valid, the image memorizing is done as follows: • After selecting FIELD, the image is stored in “A” first. After that, ea...
Page 25 - Setting the number of prints
24 6. Printing procedures (Basic prints) 2 2 2 2 2 Continuous printing The desired number of memorized images can be printed continuously when the desired number is set before printing. The number of prints can be changed during printing. The continuous printing also can be cancelled by setting the ...
Page 26 - Setting the functions; Setting each function on the menu display.; automatic gain control, separating composite video signal, etc.; Monitor display
25 7. Setting the functions Setting each function on the menu display. There are 2 functions menus. 1 1 1 1 1 " MAIN MENU " Sub menu 2 2 2 2 2 " MEMORY SW MENU " Sub menu 1 MAIN MENU is used to open the sub menu. Setting the following with the sub menu. When selecting "SAVE",...
Page 27 - Operation; MAIN menu; ON; SAVE
26 7. Setting the functions 3.ADDITIONAL STOROBE : OFF/1/15 secMULTI : OFF/ONMODE : SAME/DIFF/PHOTOIMAGES : 2/4/16 SEPARATE : OFF/ ON CHANGE : OK/CANCEL 6.SYSTEMSIZE : W/M/N/USER USER ADJ : PUSH[ ] ] PAGE INC : OFF/ONBUZZER : OFF/ON CHANGE: OK/CANCEL USER SIZE ADJCOPY : OFF/W/M/NTOP : 0 (-6 -110)BOT...
Page 28 - shows the reference page.; MEMORY SW menu; Making a comment
27 7. Setting the functions p shows the reference page. MEMORY POWER When pressing the power button while pressing the MEMORY button, the following menu is indicated. p43 MEMORY SW MENU 1.KEY SET : PUSH [ ] ] 2.REMOTE SET : PUSH [ ] ] 3.PRINT SET : PUSH [ ] ] 4.SYSTEM SET : PUSH [ ] ] SAVE 1 . KEY S...
Page 29 - Displaying menu screen; All functions are operated with the remote control.; Main menu – sub menu display; MEMORY SW MENU – sub menu display; Procedure for selecting and setting the menu
28 7. Setting the functions Displaying menu screen • All functions are operated with the remote control. 1 1 1 1 1 Main menu – sub menu display • Press the MENU M E N U button to display Main menu. 2 2 2 2 2 MEMORY SW MENU – sub menu display • Press the POWER button while pressing MEMORY button to d...
Page 31 - BRT
30 7. Setting the functions (Main menu) Function 1 1 1 1 1 MAIN MENU Open the sub-menu from Memory menu. e.g. Monitor display 1. COLOR ADJ BRT Items and setting displayed are shown below. 1.COLOR ADJ ....... Adjust color of printing image 2.SIGNAL SET ....... Selecting the input signal, reverse of o...
Page 32 - COLOR ADJ Adjusting the color of the image; COLOR
31 7. Setting the functions (Main menu) 1 1 1 1 1 COLOR ADJ Adjusting the color of the image • With this menu, the color of the source image and memorized image can be adjusted. • This menu is also displayed by pressing COLOR ADJUST COLORADJUST button. BRT (Bright ) Function Adjust the brightness of...
Page 33 - Item; CENTER
32 7. Setting the functions (Main menu) ANALOG ADJ The adjustment image of analog input signal display • This menu is used to adjust the image of analog input signal display before storing in the memory. • This menu is opened when pressing RIGHT shift button on "ANALOG ADJ : PUSH [ ] ". BRT ...
Page 34 - SIGNAL SET Signal selecting menu; INPUT
33 7. Setting the functions (Main menu) 2 2 2 2 2 SIGNAL SET Signal selecting menu INPUT Function Select the signal from inputting signal terminal on the rear panel. VIDEO .......... Signal from VIDEO input terminal S -VIDEO ..... Signal from S-VIDEO input terminal FIELD Function The odd/even field ...
Page 35 - ADDITIONAL Special print setting; STROBE
34 7. Setting the functions (Main menu) 3 3 3 3 3 ADDITIONAL Special print setting STROBE Function This function is used to repeat storing the image in the memory according to the selected time interval. When MULTI is set to "ON", the image is stored in order of image number . When MULTI is ...
Page 36 - SEPARATE; PRINT Print setting 1; MODE
35 7. Setting the functions (Main menu) SEPARATE Function Switching the white frame Separate the each image in multi-image print with white frame ON ............... White frame print OFF ............... Normal print • When "MULTI" is set to "ON", this function is displayed. 4 4 4 4 4...
Page 38 - SIZE; BUZZER
37 7. Setting the functions (Main menu) 5 5 5 5 5 COMMENT Making a comment Function Making a comment on print Refer to pages 39-42 for details. 6 6 6 6 6 SYSTEM System setting 1 SIZE Function Selecting a print area of printing image Selecting the print size and user print size setting printing size ...
Page 39 - USER SIZE ADJ Setting the image size; COPY
38 7. Setting the functions (Main menu) USER SIZE ADJ Setting the image size The printing area can be changed and stored in memory as a user setting. When selecting " USER ADJ " on the "6.SYSTEM "menu . Press the RIGHT shift button, then, USER SIZE ADJ menu is displayed. When pressin...
Page 40 - Explanation; Shift button; Shift button; Comment making display
39 7. Setting the functions (Making a comment) Making a comment Select the making a comment menu "COMMENT". This functions are operated with the remote control using the menus displayed on the monitor screen. Explanation • Listed below are the three comment displays. A ) Comment display bloc...
Page 41 - Comment making procedure
40 7. Setting the functions (Making a comment) Comment making procedure 1 Press the RIGHT or LEFT shift button to select the position where a letter is inputted. 2 Press the UP or DOWN shift button to select the inputting letter. 5.COMMENT [ POSITION ] 2 { SELECT } 2 0 1 2 3 4 5 6 7 8 9 + - / =...
Page 42 - Changing character type; Deleting a letter or inserting a space
41 7. Setting the functions (Making a comment) Changing character type 1 Press the MENU M E N U button. • Comment editing display is shown. 2 Press the UP or DOWN shift button to select the character type. • The characters in the character block change. 3 Press the MENU M E N U button. • Comment mak...
Page 43 - Close the comment menu
42 7. Setting the functions (Making a comment) Close the comment menu 1 Press the SET SET button to select " CHANGE : OK/CANCEL" . • " CHANGE : OK/CANCEL " is displayed in red. 2 Press the shift button to select "OK" . • In case of changing a comment , select the "CANCEL&...
Page 44 - Item and setting are as shown below.
43 7. Setting the functions (Memory SW menu) SETTING FUNCTIONS 2 2 2 2 2 MEMORY SW MENU When pressing the POWER button while pressing the MEMORY button on the front panel with the POWERturned off the MEMORY SW MENU is displayed. (e.g.) MEMORY SW MENU 1. KEY SET KEY LOCK Item and setting are as shown...
Page 45 - KEY SETTING Setting the buttons' function; KEY LOCK
44 7. Setting the functions (Memory SW menu) 1 1 1 1 1 KEY SETTING Setting the buttons' function KEY LOCK Function The function on the remote control buttons and all of the buttons of the unit except POWER button are not available. ON ................ The function on the remote control buttons excep...
Page 46 - REMOTE SETTING Remote terminal setting display; CONNECT; BUSY LEVEL; Function
45 7. Setting the functions (Memory SW menu) 2 2 2 2 2 REMOTE SETTING Remote terminal setting display CONNECT Function Setting the No. 2 pin function of the remote terminal 2 on the rear panel. NORMAL .............. No. 2 pin functions as "MEMORY". PRE-CUT ............... No. 2 pin functions...
Page 47 - PRINT SETTING Print setting 2; MARGIN CUT; Margin cut
46 7. Setting the functions (Memory SW menu) • The signal defined in BUSY 1 is output from Remote terminal 1. • The two signals defined in BUSY 1 and 2 are output from Remote terminal 2. • The individual definition is available in BUSY 1 and BUSY 2. • Make the necessary signal definition. • The acti...
Page 48 - SYSTEM SETTING System setting 2; REMAINING
47 V POSITION Function Adjusting the vertical position of printing image. Setting area - 28 to +28 ( Change each 2 lines) When 2-image printing ( selected "2" in IMAGES) on L size print paper, the top and bottom of the image may not be fully printed depending on memory size. It may be necess...
Page 49 - The following printing is available.; CARD size
48 8. Printing procedures (Special prints) The following printing is available. 1 MULTI prints SAME or DIFF ............................ Pages 50 - 53 2, 4, or 16 images can be printed on a sheet. 2-image 4-image 16-image S-size paper L-size paper S-size paper L-size paper S-size paper L-size paper ...
Page 50 - Storing multi-image in memory
49 8. Printing procedures (Special prints) Storing multi-image in memory The multi-image can be stored in memory as follows. SAME (The same two images are printed on a sheet.) • 1 image is stored in FIELD A. • 1 image is stored in FIELD B. • 1 image is stored in FRAME. • 2-image print consists of th...
Page 51 - MULTI PRINTS; , 4 or 16 images can be printed on a sheet.; OPERATION; Setting the multi-print function; Press the MENU button. Then, Press the DOWN; S size prints
50 8. Printing procedures (Special prints) 1 1 1 1 1 MULTI PRINTS 2, 4 or 16 images can be printed on a sheet. • The following prints are available. example : "W" is selected on "SIZE" in 6.SYSTEM. "OFF" is selected on "SEPARATE" in 3.ADDITIONAL. "A" shows the...
Page 53 - Storing images in memory; Press the DISPLAY button to display the set conditions.
52 8. Printing procedures (Special prints) Storing images in memory 1 Press the DISPLAY button to display the set conditions. 2 Press the FIELD/FRAME button on the remote control to select FIELD or FRAME. 3 Press the MONITOR button and select the source image ("LIVE" is displayed on the moni...
Page 54 - Storing an image in any position; Printing the images
53 8. Printing procedures (Special prints) Storing an image in any position When "MODE" is set to "DIFF" and "IMAGES" to 4 or 16 1 Press the DISPLAY button to display the set conditions. 2 Press the MONITOR button. Select source image ("LIVE" is displayed on the monit...
Page 55 - PHOTO PRINTS; Setting PHOTO print menu; A A; AA; A A A A; A A A; AA
54 8. Printing procedures (Special prints) 2 2 2 2 2 PHOTO PRINTS PHOTO print is a function to print the images on the photo size (3x4cm, 3x3.5cm, 5x5cm) and card size. • CARD size print is suited to stick on a business card. • The following prints are available. example : W" is selected on "...
Page 56 - Selecting the size
55 8. Printing procedures (Special prints) Selecting the size 1 Press the DOWN shift button to select " IMAGES : CARD / 3*4/ 5*5 / 3*3.5 " menu. 2 Press the RIGHT shift button to select " CARD " , " 3*4 " , " 5*5 " or " 3*3.5 ". Displaying the image from input...
Page 57 - Printing on pre-cut sticker; Setting
56 8. Printing procedures (Special prints) Printing the images 1 Press the MONITOR button to display the memorized image. ("MEMORY" is displayed on the monitor.) • A blue frame is indicated on the displayed image. • The image within the blue frame is photo-printed. In FIELD mode, press the M...
Page 58 - SEPARATE PRINT; A white frame can be inserted between two or more images.; • The following prints are available.
57 8. Printing procedures (Special prints) 3 3 3 3 3 SEPARATE PRINT A white frame can be inserted between two or more images. • The following prints are available. Refer to pages 50-53 (16-Multi-image) and pages 54-57 (PHOTO PRINTS) for storing image in memory. The menu only for pre-cut PHOTO size p...
Page 59 - Setting the multi-print and photo-print menus; Setting multi-print and photo-print functions; Setting the SEPARATE function
58 8. Printing procedures (Special prints) OPERATION Setting the multi-print and photo-print menus Setting multi-print and photo-print functions 1 Press the MENU button. Then, press the UP or DOWN shift button to select " 3. ADDITIONAL PUSH [ ] ". 2 Press the RIGHT shift button to select ...
Page 60 - Storing images in memory / Printing the images; STROBE PRINTS
59 8. Printing procedures (Special prints) 5 Press the SET SET button. • The source image (image from the input signal) or memorized image is displayed. Storing images in memory / Printing the images 1 Store the images to be printed in memory. • Refer to 1 MULTI PRINT or 2 PHOTO PRINT for storing im...
Page 61 - When memorizing 1 image in STROBE mode
60 8. Printing procedures (Special prints) Setting 1-image/multi-image memory When memorizing 1 image in STROBE mode This setting is used to memorize 1 image in FRAME, FIELD A or FIELD B. 1 Set the mode to 1-image. Select "OFF" in "MULTI : OFF" in "3. ADDITIONAL". 2 Set the p...
Page 63 - Setting the automatic interval printing; Set the number of images in a memory page and print size
62 8. Printing procedures (Special prints) Setting the automatic interval printing By combining STROBE printing and MEMORY printing, automatic interval printing is available. This is the function where the images are stored in memory at the set interval and printed repeatedly. Automatic interval pri...
Page 64 - Pressing the MEMORY button
63 8. Printing procedures (Special prints) Displaying the source image (image from the input signal) or the memorized image 1 Press the SET SET button. • " CHANGE : OK/CANCEL " is selected. • When changing the setting, select "CANCEL" and press the SET SET button. 2 Press the SET SET...
Page 65 - External remote 1 or 2 terminals on the rear panel; External REMOTE 1 terminal
64 8. Printing procedures (Special prints) External remote 1 or 2 terminals on the rear panel The images can be stored in memory and printed by sending the remote signal through the externalremote terminal on the rear panel. When "MEM & PRINT" function is set to "ON", the images ...
Page 66 - External REMOTE 2 terminal
65 8. Printing procedures (Special prints) External REMOTE 2 terminal • Make out the necessary circuit to use this function by referring to the following. External remote terminal Signal allocation Connector MINI DIN8PIN Pin No. Function Transmission/ Description Destination 1 Ground --- Earth 2 MEM...
Page 67 - Circuit inside the VCP; REMOTE terminal; Input signal level : TTL
66 8. Printing procedures (Special prints) Circuit inside the VCP VCP Pin No. 6 6 6 6 6 REMOTE terminal By sending the following remote control codes from Pin No. 6, the same functions as the wired remote control(accessory) can be controlled. Code Function Code Function 01 LEFT SHIFT button 02 RIGHT...
Page 68 - Error messages and countermeasures; Error messages; In case of L-size printing, the image is not printed completely.
67 9. Troubleshooting Error messages and countermeasures If for some reason printing is not possible or error occurs during printing, the error message will be displayedon the monitor screen.In this case, follow the procedure described below. Error messages DOOR OPEN PAPER EMPTY SHEET CARTRIDGE EMPT...
Page 69 - Other messages; MECHA INITIALIZE REQUEST; Overcoming paper jams
68 9. Troubleshooting Other messages MECHA INITIALIZE REQUEST Indicated when the power is turned on after turning off during printing.Press the MEMORY button for more than on second while pressing theMONITOR button. *Note : 3 MECHA INITIALIZE Indicated during initializing. PRINT STOP In the case of ...
Page 70 - Before calling for service; Symptom
69 9. Troubleshooting Before calling for service Symptom No power No image appears on the monitor. The image is not stored in memory. The image is not printed. Check and Remedy Is the power cord plug disconnected form the outlet? Connect the power cord plug to the outlet firmly. After turning the po...
Page 72 - Cleaning thermal head; In this case, clean the thermal head in the following procedure.
71 10. Cleaning Cleaning thermal head When the thermal head is dirty with dust, etc., white spots or stripes may appear on the print. In this case, clean the thermal head in the following procedure. 1 Open the door. 2 Remove the ink-cassette and print paper. 3 Wipe off stains on the bottom of the th...
Page 75 - Manufactured by Mitsubishi Electric Corporation
Mitsubishi Electric Europe B.V. UK BranchTravellers Lane, Hatfield, Herts. AL10 8XB, England, U.K.Phone (1) 707 276100 FAX (1) 707 278755 German BranchGothaer Strasse 8, Postfach 1548, 40880 Ratingen 1, GermanyPhone (2102) 4860 FAX (2102) 486-732 French Branch25, Boulevard des Bouvets - 92741 NANTER...
Mitsubishi PKA-A18GA
User Manual
Mitsubishi PCA-A42GA1
User Manual
Mitsubishi MSZ-FH18NA
User Manual
Mitsubishi MSZ-D36NA
User Manual
Mitsubishi WD-82742
User Manual
Mitsubishi MSZ-FE09NA
User Manual
Mitsubishi LT-46164
User Manual
Mitsubishi MSY-D36NA-8
User Manual
Mitsubishi MSY-A15NA-1
User Manual
Mitsubishi WD-73638
User Manual