Mitsubishi CP-770DW- Manuals

Recommended separation distances between Portable and mobile RF communications equipment and the Model CP770DW The Model CP770DW is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled. The customer or user of the Model CP770DW can help prevent electro...

1 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS CONTENTS Contents ................................................................................................ 1Safety precautions .............................

2 SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This product is designed for operation on 100-120V AC or 220-240V AC 50/60Hz. Never connect to any outlet or power supply having a different voltage or frequency. WARNING: THIS APPARATUS MUST ...

3 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS INSTALLATION LOCATIONS MAINTAIN GOOD VENTILATION Ventilation slots and holes are provided on the rear, sides and bottom of this unit. Place the unit on a hard an...

4 OTHER CAUTIONS Dust or other foreign matter adhering to the print paper or the sheet cartridge, or deformation resulting from exposure to extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images. NOTE:MEMORIZED IMAGES ARE STORED IN VOLATI...

5 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS SPECIAL FEATURES 3 PRINT SIZES ARE AVAILBLE ACCORDING TO THE PURPOSE 3 printing sizes, LL size (max.150 x 104.8 mm), L size (max.130 x 104.8 mm) and S size (max....

6 UNPACKING UNPACKING Take the unit out of the box by the following procedures. Make sure to check the contents. 1 1 1 1 1 Open the top of the box. 2 2 2 2 2 Remove the accessory box. 3 3 3 3 3 Remove the cushion above the unit. 4 4 4 4 4 Take the unit out of the box carefully. Make sure to keep the...

7 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS FEATURES & FUNCTIONS FRONT PANEL 1 1 1 1 1 POWER BUTTON Press to turn on power . Press again to turn of f power. When the power is turned on, the lamp above ...

8 REAR PANEL 1 1 1 1 1 REMOTE TERMINAL This terminal is not available. Do not use this terminal, except qualified service personnel. 2 2 2 2 2 MODE SWITCHES Used to set the various functions of this unit. See page 9. 3 3 3 3 3 PARALLEL DATA IN PORT Use these terminals to connect this unit to a devic...

9 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS CONNECTIONS The unit is compatible with each of the following input signals. • Parallel data signal : for Centronics compatible Parallel data interface • SCSI da...

10 CONNECTIONS 2 2 2 2 2 SETTING ON LINE STATUS 1 1 1 1 1 Press POWER button to turn on this unit. • The lamp above the POWER button is lit. 2 2 2 2 2 Turn on the power of the personal computer connected. 3 3 3 3 3 Confirm that the ON LINE button on the front panel is lit. • When ON LINE is selected...

11 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS CONNECTION WITH SCSI DATA SIGNAL EQUIPMENT SCSI interface is available if optional SCSI board is installed. SCSI board is installed at the rear option slot of t...

12 BEFORE OPERATION REMOVING TRANSPORT SCREW AND PROTECTIVE CUSHION To prevent damage during transportation/shipping, a protective cushion is inserted into themechanism, and the printing mechanism is locked into position from the bottom with a transportscrew.Remove the screw by the following procedu...

13 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS Holder Print paper Print paper Holder Insert 20cm Cut Cut Cut Bobbin without gear Bobbin with gear Incorrect 2 2 2 2 2 INSTALLING MONOCHROME THERMAL PAPER 1 1 1...

14 BEFORE OPERATION 3 3 3 3 3 Insert the print paper under Roller 1 1 1 1 1 and 2 2 2 2 2 in order. 4 4 4 4 4 Insert the edge of the print paper under Roller 3 3 3 3 3 . Be sure to insert the paper straight. 5 5 5 5 5 Feed the print paper through the paper outlet with your hand. 6 6 6 6 6 Pull the p...

15 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS 2 2 2 2 2 INSERT THE PRINTING UNIT 1 1 1 1 1 Push the printing unit until it is locked into place. 2 2 2 2 2 After plugging the power cord, press POWER button o...

16 BEFORE OPERATION USAGE AND KEEPING OF PAPER SHEET SET 2 BEFORE PRINTING • Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams. Immediately after the paper is replaced, 2-3 images may be printed with a blankpart due to hand’s dust or oil. Refer to Pages 13 - ...

17 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS INSTALLING PRINTER DRIVER Printer driver is required to print the data from a personal computer connected with thisunit.The printer driver for Windows ® is supp...

18 TROUBLESHOOTING INDICATION ON THE FRONT PANEL & COUNTERMEASURES If for some reason printing is not possible or error occurs during printing, the indicator on the front panel will be lit.In this case, follow the procedure described below. ALARM Causes and countermeasures The printing unit is n...

19 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS 1 1 1 1 1 Press OPEN button to pull out the printing unit. When it is not working, turn off the power once. Then try to press OPEN button again. 2 2 2 2 2 Remov...

20 BEFORE CALLING FOR SERVICE 2 Use the following troubleshooting chart to try to resolve any apparent defect in operation. Symptom Check and Remedy No power Is the power cord plug disconnected from the outlet? → Connect the power cord plug to the outlet firmly. → In an event of power failure, turn ...

21 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS Thermal head Cleaning part Bottom part of thermal head Cleaning part A small amount of alcohol ENLARGE SIZE Ink sheet sensor Metal spatula Ink sheet sensor refl...

22 Rubber roller Shaft Paper end sensor Ditch part of shaft Slide the kit to "1" direction with moving "2" direction. 1 2 6 6 6 6 6 Cleaning paper guide shaft. The seal paste is stuck on the ditch part of the shaft if you use it for a long time.Wipe with tissue paper etc. which is so...

23 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS SPEC & OPTIONS SPECIFICATIONS Class Digital Colour Printer Model CP770DW Printing method Sublimation Dye Thermal Transfer : 3 pass color printing (yellow, m...

24 SPEC & OPTIONS OPTIONS 2 2 2 2 2 INK SHEET Product name Ink sheet size No. of prints Usage PK700S S size 200 For 3 color use PK700L L size 130 For 3 color use 2 2 2 2 2 PRINT PAPER Product name Ink sheet size No. of prints Usage CK700 S/L size S size : 200 For 3 color use L size : 130 K65H/K6...

25 FEA TURES & FUNCTIONS PRECAUTIONS SPECIAL FEA TURES & UNP ACKING CONNECTIONS BEFORE OPERA TION TROUBLE- SHOOTING CLEANING OTHERS PARALLEL DATA SIGNAL • Connector JD36SL equivalent (36-pin) • Input level TTL • Parallel input connector port Signal allocation (Signal : Compatible) Pin No. 1 ...

Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Herts. AL10 8XB, England, U.K. Phone (0) 1707 276100 FAX (0) 1707 278755 German Branch Gothaer Strasse 8, 40880 Ratingen ; Postfach 1548, 40835 Ratingen ; Germany Phone 02102/ 486-9250 FAX 02102/ 486-7320 French Branch 25, Boulevar...