Page 3 - Contents
3 Contents Page No. Abrasive Paper 100 – 102 Angle Grinder System Accessories / FIXTEC Nut 97 – 98 Band Saw Blades 121 Batteries 150 Biscuit Jointer Accessories 142 Caulk and Adhesive Gun Accessories 146 Chargers 149 Chisels & Special Application Tools – SDS-plus 21 – 22 – SDS-Max 23 – 24 / 27 –...
Page 4 - LONGER; LIFE TIME
LONGER THAN LIFE ! + 50 % LONGER LIFE TIME Thanks to the optimum 4 x 90° symmetry, all four carbide cutting edges function evenly and do not jam up when hitting rebar. Four symmetrically spiral shoulders ensure low, uniform flute wear. Solid one piece carbide tip for outstanding lifetime. Thicker co...
Page 5 - SDS-plus RX4 drill bits – 4 cut
A B Ø A B Ø > Ø 18 mm Ø 5 – 16 mm 5 ▲ Pre-drill with a short drill bit of the same diameter. Embedded solid one piece carbide with centering tip for easy spot drilling and long lifetime.Four symmetrical 90° cutting edges guarantee perfect round holes for anchor fixing as well as reduce the risk o...
Page 6 - SDS-plus RX4 drill bits – 4 cut / 10 pack
6 Ø mm A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 16 600 540 1 352955 376131 £43.86 16 1000 940 1 352956 376148 £97.80 18 250 200 1 356502 320950 £31.28 18 450 400 1 356503 320967 £42.14 20 250 200 1 356504 320974 £35.45 20 450 400 1 356505 320981 £46.52 22 250 200 1 ...
Page 7 - SDS-plus drill bits – 2 cut
A B Ø 7 Maximum drilling speed: The dynamic, chisel-shaped drill head ensures swift penetration and optimal material removal. Maximum durability: The toughest carbide tip in optimised design held by high strength brazing offers an unrivalled durability even in steel reinforced concrete. Minimum vibr...
Page 8 - SDS-plus drill bits – 2 cut / counter displays
8 ▲ Pre-drill with a short drill bit of the same diameter. Ø mm A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 11 160 100 1 367066 336722 £5.98 11 260 200 1 399329 359578 £6.97 12 160 100 1 307075 308910 £5.64 12 210 150 1 307076 308927 £6.73 12 260 200 1 344297 312238 £7.3...
Page 10 - Grease
A B Ø A B Ø 10 10 53.5 25 12 SDS-plus These drill bits will drill in metal, wood and stone but in rotary mode only. Hammer action cannot be used with these drill bits. Ideal for tradesmen who need to drill through a variety of materials in one go. Made in Germany. TCT core cutters 5.5 160 100 10...
Page 11 - TCT core cutters; SDS-plus core cutters; TCT core cutter set versions
A A A Ø A B Ø A 11 Ø mm A mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 35 58 1 344478 312559 £66.89 50 58 1 344479 312566 £75.46 65 50 1 344480 312573 £89.72 68 50 1 399099 357031 £97.41 82 50 1 344481 312580 £105.36 90 50 1 344482 312597 £124.39 Ø mm A mm B mm Quantity Id. No...
Page 12 - Features; TCT Universal Holesaws
TCT Universal Holesaws are ideal for electricians, carpenters, kitchen fitters and all related heating, ventilation and plumbing trades. TCT Universal Holesaws are designed for use in a wide variety of materials such as: ■ ■ Bricks* – suitable for both solid bricks and bricks with caviti...
Page 13 - TCT Universal holesaw set version
A Ø Ø A B Ø A A A A Ø A Ø 13 Ø mm A mm No. of teeth Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 25 60 3 1 399100 357048 £36.52 30 60 3 1 399101 357055 £36.74 35 60 3 1 399102 357062 £39.75 40 60 3 1 399103 357079 £46.00 45 60 3 1 399104 357086 £48.53 50 60 3 1 399105 357093...
Page 14 - cut drill bits; Shorter spiral windings.; Patented reinforced flute geometry.
90° SDS-Max / 21 mm K-Hex 4 cut drill bits Large carbide tip with patented rebar chamfers. Ensures lower vibration and optimised drilling performance when hitting reinforced steel. Longer lifetime. Shorter spiral windings. For faster transport of drilling dust from the head to the flute = Less wear ...
Page 15 - SDS-Max drill bits – 4 cut
A B Ø A B Ø Ø 16 – 52 mm Ø 12 – 15 mm 15 ▲ Pre-drill with a short drill bit of the same diameter. Ø mm A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 12 340 200 1 352750 374083 £38.59 12 540 400 ▲ 1 352751 374090 £50.57 14 340 200 1 352752 374106 £38.59 14 540 400 ▲ 1 352753 37...
Page 17 - SDS-Max TCT core cutters –; Adaptor; 1 mm K-Hexagon drill bits – 4 cut
A Ø A A Ø A B Ø 17 Not suitable for rotary hammers > 10 kg. Made in Germany. Description Reception Id. No. 4932 EAN Code 4002395 Quantity Adaptor SDS-Max ➞■ SDS-plus 1 359490 325795 SDS-Max TCT core cutters – Two piece design Description Ø mm A mm Quantity Id. No. 4932 EAN Code 4002395 Li...
Page 18 - Drill Connect
100 % 100 % The innovative and patented Drill Connect System is the ultimate solution for those requiring maximum versatility with large diameter drilling tools. Versatile: Drill Connect acts as a link between machine and drilling tools. On one side the system is totally compatible to all SDS-Max re...
Page 19 - Extension pieces
C A B SDS max SDS max SDS max C A B 19 Suitable for use with drilling tools with a Ø of 32 mm and above. For use with rotary hammers up to 8 kg in weight. SDS-Max chisels SDS-Max one piece tunnel bits SDS-Max one piece TCT core cutters Drill Connect SDS-Max 4 cutter drill bits (minimum Ø 32 mm) Desc...
Page 20 - Chisels; Maintenance Tips
3 4 5 2 1 Chisels Convex angle designed tip for better penetration less binding and easier resharpening. A strong and shock ab sorb ing body made from premium quality alloy steel. The reception is machined to precise tolerances ensuring less wear on the chisel and power tool. Chamfered ends to preve...
Page 21 - Pointed chisels
A A B A B 10 53.5 25 12 21 A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 250 – 1 339625 304813 £10.99 A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 250 20 1 339626 304820 £10.99 A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 250 40 ...
Page 22 - Tile removal chisels
A A A B B A B A B 10 53.5 25 12 22 A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 250 25 1 339627 304837 £24.27 A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 165 75 1 352344 370030 £29.95 A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc...
Page 25 - 1 mm K-Hexagon chisels
A 65 38 106 18,7 21 A B A B 25 21 mm K-Hex Ideal for a wide range of breaking and cutting of concrete as well as demolition work. Suitable for stripping walls of plaster or ceramic tiles. Removing heavy deposits of rust and scale from metal. A mm B mm Quantity Id. No. 4932 EAN Code 4002395 380 – 1 3...
Page 26 - Dust guard; Spade chisels
65 38 106 18,7 21 A Ø A B 26 21 mm K-Hex Suitable for digging in all types of ground – clay, earth, chalk, shingle and shale. Also for digging in frozen ground. Not suitable for concrete. Prevents dust and dirt entering the tool reception area when using spades and ground rod drivers. Suitable for d...
Page 27 - application tools; Tamping tools
A A B A C A C B A A B B 27 Application: For roughing up concrete before its surface coated ie. for pitted or uneven floors or walls must often be rough ened prior to covering with a new layer of coating. Requires universal taper shank. Application: For scraping floor tile adhesive, pai...
Page 29 - Concrete drill bits – round shank –
A B Ø 29 Diamond ground percussion carbide tip with two cutting edges. For drilling in brick, tile, ceramic, concrete, plaster, slate and aerated concrete blocks. Made in Germany. 3 70 40 1 363630 332007 3.5 80 45 1 399916 365746 4 85 50 1 363631 332014 4.5 85 50 1 363632 332021 5 85 50 1 363633...
Page 30 - Concrete Super drill bits – round
A B Ø 30 These high quality concrete drill bits have a unique shaped drill head with centering point and a H-spiral flute for maximum drilling speed and longer lifetime in hard materials such as concrete, aerated concrete blocks, masonry, natural stone, artificial stone, ceramic tile, slate and ...
Page 31 - Multi material drill bits
A A B Ø Ø 31 These tungsten carbide tipped (TCT) drill bits will drill in metal, wood and stone but in rotary mode only. Hammer action cannot be used with these drill bits. Ideal for tradesmen who need to drill through a variety of materials in one go. Made in Germany. Suitable for glass, tiles, m...
Page 32 - Diamond Plus; Professional water cooling system; Application areas
32 Diamond grit edge drills and holesaws have been specially developed for professionals that need to drill in extremely hard materials such as porcelain / gres / quarry tiles, cast iron or fibreglass where it is increasingly difficult to drill with conventional holesaws. These holesaws guar...
Page 33 - Forstner bits / Selfeed bits; Bit diameter Ø mm; Auger bits; Wood drilling speeds
33 rpm 2000 1500 1000 500 0 rpm 2000 1750 1500 1250 1000 750 500 250 0 10 mm 20 mm 30 mm 40 mm 50 mm 75 mm 100 mm 125 mm Bit diameter Ø mm Forstner bits / Selfeed bits 5 mm 10 mm 15 mm 20 mm 25 mm 30 mm 35 mm 40 mm Bit diameter Ø mm Auger bits The following tables give recommended drilling speeds fo...
Page 34 - Long series
C B A Ø 34 Suitable for use with all types of corded / cordless drills including impact wrenches. Drilling with an impact wrench enables drilling holes with less effort, one hand drilling, drilling up a ladder and above head height with less risk of injury from the tool clutching out. Special zone...
Page 35 - Wood auger bits
C A B Ø 35 For heavy duty, precision drilling in soft and hard wood, large section beams, joists, floor boarding, chipboard and plywood. Lewis flute design for rapid chip removal. With Hex shank for secure chuck grip. Wood auger bits Ø mm A mm B mm C mm Id. No. 4932 EAN Code 4002395 Quantity 6 2...
Page 36 - aggressive feed screw design allows the bit; Replaceable SWITCHBLADE; the SWITCHBLADE; SWITCHBLADE; SWITCHBLADE
Ø A 36 Each Selfeed bit is supplied with 2 x blades, 2 x replaceable feed screws, 2 x set screws and 1 x allen key. Ø mm A mm Quantity Id. No. UPC Code 45242 List Price exc. VAT 35 7 ⁄ 16 ˝ Hex 1 48255120 157471 £30.96 38 7 ⁄ 16 ˝ Hex 1 48255125 157488 £32.43 51 7 ⁄ 16 ˝ Hex 1 48255135 157495 £38.89...
Page 37 - Selfeed bits; Large selfeed bits
Ø Ø A A A 37 All sizes have removable and re placeable feed screws. Two feed screws supplied with each bit. Feed screw provides fast, effortless feeding even in gummy woods. Internal cutting plane shaves hole radius for clean, smooth holes without pressure. Large selfeed bits in 76, 92 and 116 mm si...
Page 40 - Flat boring bits; Extension
A Ø B A C 40 Fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard ■ ■ Ideal for door locks, morticing, electrical and plumbing work. ■ ■ 1 ⁄ 4 ˝ Hex shank reception (DIN E 6.3) for direct insertion into the power tool or for secure chuck grip. ■ ■ Ground...
Page 43 - HSS Drill bit tip geometry
43 Normal Standard Point For standard drilling in ferrous / non ferrous metals and plastics The wide cutting edge provides a drill bit that is robust and resistant to sidewards pressure. Due to the wide cutting edge higher feed pressure is required. Can be easily resharpened. Chisel Edge Point DIN 1...
Page 44 - HSS Drill bit application guide
44 The following table gives recommended drilling speeds for the most efficient cutting speed. The tables should only be used as a guide and are dependant on the user and material being drilled. Coolants and lubricants will improve tool life by up to 5 times and workpiece finish. RPM: The number of ...
Page 46 - Metal drill bits HSS Rollforged – DIN 338; Metal drill bits HSS Rollforged – DIN 338 with reduced shank
118° Ø B A Ø B A 46 High speed steel rollforged metal drill bits produced according to DIN 338. Oxide coating enables quick swarf removal. Normal point shaped cutting tip with 118° angle. Type N flute normal angle. Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to...
Page 48 - FLUTE GEOMETRY; SPECIFICATION; thickness throughout the; Parabolic web cross section; Conventional type web; Metal drill bits HSS Ground – DIN 338; Standard drill bit; The; design is
THUNDERWEB THUNDERWEB 135° 48 135° 48 48 FLUTE GEOMETRY 135° SPLIT POINT THUNDERWEB SPECIFICATION The web on standard drill bits is a constant thickness throughout the length of the bit. Parabolic web cross section ■ Large web thickness. Strength built in. ■ Accepts higher feed pressure and torque. ...
Page 49 - – Metal drill bits
Ø B A 135° 49 THUNDERWEB – Metal drill bits HSS Ground – DIN 338 Ø mm A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 1.0 34 12 2 352345 370047 £1.22 1.5 40 18 2 352346 370054 £1.32 2.0 49 24 2 352347 370061 £1.39 2.5 57 30 2 352348 370078 £1.49 3.0 61 33 2 352349 370085 £1.76 3...
Page 50 - Metal drill bits
50 Ø mm A mm B mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 1.0 34 12 10 352377 370368 £4.89 1.5 40 18 10 352378 370375 £5.28 2.0 49 24 10 352379 370382 £5.57 2.5 57 30 10 352380 370399 £5.96 3.0 61 33 10 352381 370405 £7.04 3.2 65 36 10 352382 370412 £7.92 3.5 70 39 10 352383...
Page 52 - Metal drill bits HSS Ground Long –
135° Ø B A 52 Drill bit quality: high quality high speed steel. Tip geometry: split Point DIN 1412 C. Point angle: 135°. Tolerance: h8. Flute / Helix angle: type N flute and normal 20 – 30° angle. Right hand cutting edge. Surface / Colour: polished silver. Split point shaped cutting tip according to...
Page 53 - Metal drill bits HSS-G Cobalt –; Metal drill bits HSS-G Cobalt – DIN 338 / cassettes
135° Ø B A 53 1.0 34 12 2 363248 333080 1.5 40 18 2 363249 333097 2.0 49 24 2 363250 333103 2.5 57 30 2 363251 333110 3.0 61 33 2 363253 333134 3.2 65 36 2 363254 333141 3.5 70 39 2 363256 333165 4.0 75 43 2 363258 333189 4.2 75 43 1 363260 333202 4.5 80 47 1 363262 333226 4.8 86 52 1 363263 333...
Page 54 - Metal drill bits HSS-G Cobalt – DIN 338 / 5 and 10 pack
135° Ø B A 54 Metal drill bits ground from solid extremely heat resistant cobalt-alloyed high speed steel produced according to DIN 338. Polished finish. Split point shaped cutting tip with 135° angle for improved centering – no center punch required. 5 % Cobalt content withstands high drilling heat...
Page 55 - Contractor 50pc set
55 Info Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT Contents: HSS-G drill bits THUNDERWEB : 1 x 2.0 mm, 2 x 2.5 mm, 2 x 3.0 mm 2 x 3.5 mm, 2 x 4.0 mm, 2 x 4.5 mm 2 x 5.0 mm, 1 x 6.0 mm Masonry drill bits: 1 x 4.0 mm 1 x 5.0 mm, 1 x 5.5 mm 2 x 6.0 mm, 1 x 7.0 mm 2 x 8.0 mm, 1 x 9.0 mm,...
Page 56 - mm body together with; Magnetic drilling; Speed chart
1000 800 600 400 200 0 10 20 30 40 50 60 70 80 100 % Faster Speed and time savings are achieved due to the following factors. Firstly the annular cutter principle of only cutting material from the periphery of the hole as opposed to the twist drill which must cut the complete diameter of the hole. S...
Page 57 - HSS annular cutters
A Ø 57 Thick walled HSS annular cutters for increased durability and lifetime. With standard 19 mm Weldon reception. 30 or 50 mm depth of cut. 50 mm 30 mm 19 mm 12 mm 23 mm HSS annular cutters Ø mm A mm Qty. Id. No. 4932 EAN Code 4002395 List Price exc. VAT 12 30 1 371740 344161 £28.86 13 30 1 371...
Page 59 - ICE Hardening Process; Standard Heat Treatment; Life Performance; Up to 50% Longer Life; Ice Hardened; Speed Performance; CUTS
High Performance Bi-Metal Cobalt Holesaws ICE Hardening Process more hard metal = 50 % longer lifetime 87 % Hard Metal 87 % Hard Metal 97 % Hard Metal Standard Heat Treatment Surface Coating ICE Hardening Ice Hardened ™ Hole Saws Life Performance Up to 50% Longer Life than the Competition ...
Page 60 - FIXTEC arbors
FIXTEC arbors For holesaws Ø 14 – 30 mm FIXTEC “twist release” quick change arbor. Prevents holesaw locking onto the arbor. Compatible to all manufacturers holesaws – no adapter required. For holesaws Ø 32 – 210 mm The locking nut secures and locks the arbor drive plate against the back of t...
Page 61 - Recommended cutting speed in RPM
61 Cooling Lubricant: Cutting oil serves two pur-poses when sawing in met-als. It cools the saw and the work piece. It reduces heat and abrasion which can shorten cutting life. It also aids re -moving swarf from the cutting surface. Using a cooling lubricant will extend the life of your holesaw by 5...
Page 63 - Bi-Metal holesaw sets
63 Description Id. No. UPC Code 45242 List Price exc. VAT 8pc Holesaw set Contents: 8 pcs. Holesaws: 19, 22, 25, 29, 38 mm. FIXTEC arbor – for holesaws Ø 14 – 30 mm (Id. No. 49567210). Spacer and adaptor for FIXTEC arbor to accept Ø 38 mm holesaw. 2 x Pilot drill bits, 1 ⁄ 8 ˝ / ~ 3 mm all...
Page 64 - System accessories – Bi-Metal holesaws
64 Description For hole- saws Ø mm Reception mm Holesaw thread Id. No. UPC Code 45242 List Price exc. VAT FIXTEC “Twist Release” quick change arbor Ø 14 – 30 Hex 9.5 1 ⁄ 2 ˝ x 20 49567210 200320 £29.99 Arbor Ø 14 – 30 Hex 9.5 1 ⁄ 2 ˝ x 20 49567010 200177 £8.60 Arbor Ø 32 – 210 He...
Page 65 - Side handles; M12DE system accessories
65 ■ ■ Converts Milwaukee ® HDE 13 RQD straight drill to angle drill. ■ ■ Used extensively for drilling between joists or in tight corners. ■ ■ Head and handle swivel 360° ■ ■ Provides two speeds: 1. Low: speed decreases by 30 % torque increases by 50 %. 2. High: speed increases by 5...
Page 66 - logo; Screwdriving bits; Magnetic bit holders
66 Info Tool receptions with ¼˝ hexagonal shaft Size Length mm Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT Phillips PH 1 25 25 399586 362363 £12.17 PH 2 25 25 399587 362370 £12.17 PH 3 25 25 399588 362387 £12.17 Pozidrive PZ 1 25 25 399589 362394 £12.17 PZ 2 25 25 399590 36240...
Page 67 - Compact screwdriving bit cassettes
67 This high quality cassette aimed at the professional user is available in 3 different assortments. ■■ Slimline pocket design: 110 mm x 65 mm x 15 mm. ■■ Secure latch system: easy opening and safe closing. ■■ Extra side compartment accepts either 50 mm screwdriving bits or drill bits. ■■ F...
Page 68 - L I F E; Phillips; Shockwave Impact Duty
Ⓐ max 10 x L I F E SHOCK ZONE Ⓑ Ⓒ 68 Blister Counter display Designed for use with Impact Drivers the Shockwave Impact Duty ™ accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user’s drilling and fastening needs. Shock Zon...
Page 69 - Torx; Slotted
Ⓐ Ⓑ Ⓒ 69 Blister Counter display Storage container Reception Size Length mm Quantity Packaging Id. No. 4932 EAN Code 4002395 List Price exc. VAT Torx TX 10 25 2 Ⓐ 352598 372560 £2.49 TX 15 25 2 Ⓐ 352440 370993 £2.49 TX 20 25 2 Ⓐ 352441 371006 £2.49 25 25 Ⓑ 352555 372133 £19.99 25 250 (10 x 352555) Ⓒ...
Page 70 - 5 piece Shockwave puck set; 8 piece Shockwave bits & nut drivers set; 0 piece Shockwave compact drill & drive set
70 Shockwave Impact Duty ™ sets Info Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 15 piece Shockwave puck set Display (contains 10 x 15pc puck set) 1 352605 372638 £199.99 Contents: 1 x PH1 / 2 x PH2 1 x PZ1 / 2 x PZ2 / 1 x PZ3 1 x TX10 / 2 x TX15 / 2 x TX20 / 1 x TX25 / 1 ...
Page 71 - 2 piece Shockwave drive guide set 1; 2 piece Shockwave drive guide set 2
71 ■ ■ Slimline pocket design ■ ■■ Drive Guide bit holder with extendable sleeve to hold long screws secure. Up to 110 mm total length. ■ ■ Front loading screwdriver handle. ■ ■ Metal wire stripper for Ø 0.75 / 1.0 / 1.5 / 2.5 mm². ■ ■ Wire loop maker up to 5 mm². Info Quantity Id. No. 4932 EAN ...
Page 74 - Metal drill bits HSS Ground; Offset attachment for heavy; KNUCKLE
135° A B 28 mm* 90 mm 74 Metal drill bits HSS Ground Drill bit quality: high quality high speed steel ground from solid. Tip geometry: split point DIN 1412 C. Point angle: 135°. Flute: Thunderweb design. Reception: ¼˝ Hex (DIN 3126 – E 6.3). Surface / Colour: black oxide. Right hand cutting edge...
Page 77 - Tool Drive; FIXTEC and SDS-plus chuck adaptors; FIXTEC
77 Only suitable for PLH 16 QEX, V28 HX, V18 HX, PLH 26 QEX, PH 30 Power X, KH 26 XE, KH 24 XE, KH 28 Super XE, BH 26 LXE and PH 26 X. Chuck adaptor with direct bit reception ( 1 ⁄ 4 ˝ Hex) to accept screwdriving bits. Threaded housing enables adaptor to be tightened to the chuck resul...
Page 78 - Keyed chucks; Chuck keys and accessories
78 Chuck jaws open mm Reception Locking device Safety scr ew Rotar y drill Per cussion drill Batter y drill Chuck key Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 1.0 – 10 3 ⁄ 8 ˝ x 24 ● ● ● ● A 1 373412 349760 £16.91 1.0 – 10 1 ⁄ 2 ˝ x 20 ● ● ● ● A 1 269401 302932 £15.46 1.5 – 1...
Page 79 - Keyless chucks; Keyless chucks for FIXTEC (spindle lock) machines
79 Chuck jaws open mm Reception Locking device Safety scr ew Rotar y drill Per cussion drill Batter y drill Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT 1.0 – 10 3 ⁄ 8 ˝ x 24 ● ● ● 1 349457 318155 £30.87 1.0 – 10 1 ⁄ 2 ˝ x 20 ● ● ● ● ● 1 364382 337675 £29.85 1.5 – 13 1 ⁄ 2 ˝ x 20 ●...
Page 80 - Wet Diamond Drilling Cores; WCHP
80 Wet Diamond Drilling Cores Standard 1 ⁄ 2 ˝ G reception Standard 1 1 ⁄ 4 ˝ UNC reception Engraving of diameter and type on the core reception for longterm visibility Laser welded segments guarantee against break off 10 mm segment height for superior lifetime WCHP-S...
Page 81 - Wet diamond drilling cores
B B C C Ø Ø A A B C Ø A 81 WCHP-SB Ø 8 – 50 mm WCHP-SB Ø 52 – 152 mm WCHP Ø 52 – 350 mm Ø mm Description DD3- 152 DCM2-250C DCM2-350C A Core reception B Working length mm C Total length mm Id. No. 4932 EAN Code 4002395 List Price exc. VAT 8 WCHP-SB 8 ✔ ◆ ½˝ G 70 135 352072 367269 £78.14 12 WCHP-SB 1...
Page 82 - System accessories –
82 Description DD3- 152 DCM2- 250C / 350C Id. No. 4932 EAN Code 4002395 List Price exc. VAT Fixing kit For exclusive use in concrete! Including stud bolt, setting tool, wing nut, washer and 5 pcs M12 drop anchor (Ø 16 mm drill bit is required to set the drop anchor). ● ● 399731...
Page 83 - FIXTEC Diamond Core System; The Future; FIXTEC solution with dust extraction
B A A B 83 FIXTEC Diamond Core System The patented Milwaukee ® range of FIXTEC diamond core adaptors allows changing diamond cores in a matter of seconds without the use of extra tools. The most common complaint with existing systems is that the diamond core locks itself tight onto the machine makin...
Page 84 - Dry diamond cores with dust
A Ø B C A B 84 Centering star (2 pieces pack) (For use only with guide rod 399173) ■ ■■ 10 mm high segments for longer life. ■ ■■ Laser welded segments for extra durability. ▲ ■ Use with the machine set to rotary only, not suitable for hammer action. ▲ ■ During pre-drilling the...
Page 85 - Dry diamond cores for electrical
A Ø B C A B 85 ■ ■■ 10 mm high segments for longer life. ■ ■■ Laser welded segments for extra durability. ▲ ■ Use with the machine set to rotary only, not suitable for hammer action. ▲ ■ During pre-drilling the centering unit (centering stars, guide rod and SDS-plus pilot drill bit) must...
Page 86 - Dry diamond drilling for electrical sockets
A A B C ! / A A Ø Ø B B C C B 86 ■ ■■ 7 mm high segments. ■ ■■ Laser welded segments for extra durability. ■ ■■ Suitable for installation of electrical sockets and junction boxes. ▲ ■ Use with the machine set to rotary only, not suitable for hammer action. ✔ Most suitable. Recomm...
Page 87 - Dry diamond drilling without
B A A B C ! A Ø B C 87 ■ ■■ 10 mm high segments. ■ ■■ Laser welded segments for extra durability. ▲ ■ Use with the machine set to rotary only, not suitable for hammer action. ✔ Most suitable. Recommended for these materials. ◆ Limited suitability – recommended for intermittent use. V...
Page 88 - DIAMOND PREMIUM BLADES
MILWAUKEE ® SPEEDCROSS DIAMOND BLADES ARE ENGINEERED FOR ALL CONSTRUCTION SITE PROFESSIONALS WHO DEMAND ONLY THE BEST IN PERFORMANCE WHEN WORKING IN THE TOUGHEST ENVIRONMENTS. Segments 10 mm segment height to ensure long lifetime. High diamond concentration with special aggressive geometry gives a h...
Page 89 - Speedcross Blades; HUDD
89 ■ ■ Universal blades for a variety of materials ■ ■ Classed into two categories for maximum lifetime ■ ■ 10 mm segments height to ensure long lifetime ■ ■ Laser welded segments, so 100% user friendly ■ ■ Low vibration MAXIMUM SPEED, LONG LIFE, LOW VIBRATION ! The Speedcross blades are both univer...
Page 90 - Diamond blades; DU
90 Diamond blades A general purpose blade offering good performance in speed and lifetime in a wide variety of construction materials. A general purpose turbo rimmed blade for cutting a wide variety of general building materials. The turbo rim ensures clean chip free cuts. DU 115 115 22.23 10 2.2 1 ...
Page 93 - Combi-segment diamond cup wheels
93 All-arounder in applications: For quick grinding down of thick concrete layers. For levelling of concrete, granite and natural stone surfaces. For edge grinding applications e.g. grinding off high edges of concrete, granite, natural stone tiles. For roughening prior to covering with a new layer o...
Page 94 - Diamond blades: Which diamond
94 ■✔ ■ ■ Most suitable. Recommended for these materials. Very long service life and very good cutting characteristics. ■◆ ■■ ■■ Suitable. Recommended for intermittent use in these materials. Good service life and cutting characteristics. Material Type Speedcross Premium Professional HUDD AUDD DU DU...
Page 95 - Cutting and grinding discs; Metal cutting discs
S C 41 / 115 95 Applications: iron and sulphur free top line thin cut-off wheels for all steels. Best suitable for stainless and acid-resistant steel, hardox, heat-resistant cast steel, spring steel, mild and tool steel. Characteristics: + 30 % more life, 50 % less cutting time, 50 % less dust. Lo...
Page 96 - Flap discs; Maximum productivity with
96 Applications: ferrous metals, non-ferrous metals (aluminium, titan, etc.), stainless steel V2A (1.4301) / V4A (1.4401) Applications: ferrous metals, stainless steel V2A (1.4301) / V4A (1.4401) Flap discs Maximum productivity with 50% faster material removal 2 x longer lifetime ■ ■ Ceramic hybrid ...
Page 97 - FIXTEC Nut
7 sec 9 sec 11 sec 12 sec 5 sec 97 WS-T1 1 351790 201372 Description EAN Code 4002395 Id. No. 4932 Quantity Vice opening 120 mm Max. profile cuts with Ø disc 180 mm 30 x 110 mm Max. pipe cuts with Ø disc 180 mm 40 mm Max. profile cuts with Ø disc 230 mm 45 x 110 mm Max. pipe cuts with Ø disc 230...
Page 102 - Abrasive belts
102 Cloth sanding belts for wood, metal, paint, lacqueur, plaster. Grit type: fused alumina, half-open. Artificial resin-bonded on special fabric. 40 5 75 x 533 312475 301263 60 5 75 x 533 312476 301270 80 5 75 x 533 312477 301287 100 5 75 x 533 312478 301294 150 5 75 x 533 312479 301300 240 5 75 x ...
Page 104 - System accessories – Orbital sanders
104 Description HBS 65 HBSE 75 S BS 100 S BS 100 LE BBS(E) 100 BBS(E) 1100 Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT Screw clamp (single piece) for stationary use on the work surface (2 units required). ● ● ● ● ● 1 367730 338566 £24.62 Extraction hose for connectio...
Page 105 - Premium polishing accessories –
105 Premium polishing accessories – Hook & Loop Ø 125 mm Description Ø mm Height Qty. Id. No. 4932 EAN Code 4002395 List Price exc. VAT Polishing backing pad with M14 thread Very flat design with excellent flexibility. Low vibration allows precise work on any flat and curved profiles...
Page 106 - Polishing accessories –
106 Description Ø mm Height Qty. Id. No. 4932 EAN Code 4002395 List Price exc. VAT Polishing backing pad with M14 thread 125 150 25 25 1 1 373156* 373161 347278 347285 £29.54£30.82 Felt polishing disc soft Second polishing / finish of new lacquer work, non-ferrous metals and stainles...
Page 107 - SAWZALL; The Milwaukee
+50% 107 SAWZALL ® Blades ■ Up to 50 % longer life ■ Unique cyrogenic heat treatment process provides tougher teeth for extreme applications ■ Excellent cutting performance and lifetime in difficult materials such as stainless steel ✔ Upto 65 HRC tooth hardness with cobalt for the most demanding app...
Page 108 - Special scroll blades; Blade shapes
108 1. Universal blades The universal blade is for general use. Its even width guarantees good cutting stability and excellent guidance. This enables straight edge cutting through many different materials. 2. Sloped blades Sloped blades are commonly used when cutting wood and demolition applications...
Page 109 - For cutting metal the following table can be used for guidance.; A – mm; Tooth geometry
109 To attain the correct blade length, it is necessary to take the width of material to be cut and add an extra 80 mm.Selecting the correct tooth pitch for the material being cut is dependent on the thickness of the material being cut, this is extremely important when cutting metals to ensure the b...
Page 110 - Application guidelines
110 Cutting oil Turpentine Compressed air Water Dry Cutting Speed Recommendation The following table can be used as a rough guide, however the material wall thickness must also be considered when deciding on the correct speed. Cut Cool – Cut Faster – Cut Longer To ensure longer life, it is recommend...
Page 111 - For faster plunge cutting and reaching into restricted areas.; Wood with nails: Demolition blades
111 Blade length mm Tooth pitch mm Teeth per inch Material type Ref. No. Qty. Id. No. UPC Code 45242 List Price exc. VAT Material thickness – mm 150 4.2 6 HCS S644D 3 48001075 079810 6 –100 6 –100 ● £7.69 150 4.2 6 HCS S744D 3 48001076 079827 6 – 50 6 – 50 ● £7.69 230 4.2 6 Bi-Met,Co – 5 48005016 08...
Page 112 - Wood with nails: Heavy Duty Demolition blades
112 Blade length mm Tooth pitch mm Teeth per inch Material type Ref. No. Qty. Id. No. UPC Code 45242 List Price exc. VAT Material thickness – mm 150 2.5 10 Bi-Met,Co – 5 48005092 082766 3 – 10 3 – 10 5 – 50 3 – 10 5 – 50 Ø 3 – 50 £13.07 150 2.5/1.8 10/14 Bi-Met,Co S922VF 5 48005292 084067 3 – 10 3 –...
Page 113 - Metal: THIN KERF blades; THIN KERF
113 Metal: THIN KERF blades Improved tooth geometry for best speed and double the lifetime. Bi-Metal quality cutting teeth with 8% Cobalt the ultimate in performance and lifetime. Stamped indentations around the reception strengthens the blade at its weakest point. Unique cyrogenic heat treatment pr...
Page 115 - Metal: Heavy Duty demolition blades; LONGEST
115 Improved tooth geometry for best speed and double the lifetime. Thick 1,06 mm robust blade body for precise cuts. 25 mm blade height for improved stability and minimum vibration. Bi-Metal quality cutting teeth with 8 % Cobalt the ultimate in performance and lifetime. Stamped indentations around ...
Page 117 - Metal: Extra Heavy Duty; pc SAWZALL
117 ■ ■ Strong and precise: extra thick 1.60 mm blade body. ■ ■ Bi-Metal construction: excellent blade life and performance. ■ ■ Tooth geometry: aggressive strengthened tooth tip design and uniform gullet depth allows for more material to be removed per stroke for faster cutting. ■ ■ Blade shape: sl...
Page 118 - Special application: cast iron / abrasive materials / fibreglass; Special application: frozen materials; – for easy and quick plunging.
118 Special application: cast iron / abrasive materials / fibreglass Blade length mm Tooth pitch mm Teeth per inch Material type Ref. No. Qty. Id. No. UPC Code 45242 List Price exc. VAT Material thickness – mm 230 Coarse Diamond – 1 48001450 187416 Ø 10 – 160 Ø 10 – 160 3 – 175 £23.53 150 Coarse TC ...
Page 119 - System accessories – SAWZALL; Special application: ductwork blade; optimized tooth geometry 30 tpi for cutting thin material 0,6 – 1,5 mm.; Special application: drywall / plasterboard blade; fast and effortless plunging.
119 System accessories – SAWZALL ® Id. No. UPC SSE 1000 A VS SSE 1000 SQ SSE 1000 QX SSPE 1000 QX SSD 1100 X SSPE 1300 QX SSPE 1300 SQ SSH 800 QX Hatchet PSH 18 – 18 V Hatchet PSX 18 V18 SX V28 SX USE 980 X USE 900 SSPE 1500 X List Price exc. VAT Heavy Duty cast iron pipe clamp with round fixing pos...
Page 120 - HACKZALL; blades
120 ■ ■ Especially engineered blades for exclusive use on 12 V HACKZALL. ■ ■ Bi-Metal construction for increased tooth durability. ■ ■ Optimised tooth form for aggressive and faster cutting. ■ ■ Thinner blade body for better speed of cut and 35 % more cuts per charge. Blade length mm Tooth pitch mm ...
Page 121 - Choosing the right tooth geometry; Band saw blades; Tooth pitch 1 mm
10 10/14 14/18 14 18 24 121 Choosing the right tooth geometry Blade length 1139.83 mm Blade length 879.5 mm Blade length 687.57 mm (M12) Blade length 1139.83 mm Bi-Metal blades with matrix II high speed steel teeth with 8 % cobalt outlast conventional blades up to 3 times, requiring fewer blade chan...
Page 122 - Shank colour means application; Jigsaw blades; Material qualities
122 Shank colour means application = For all types of wood, laminated chipboard, chipboard, plywood, blockboard and plastics. Silver colour blade body. = For all types of ferrous and non-ferrous metals, steel, aluminium, brass, copper, stainless steel, lead, tin and sandwich materials. Silver colour...
Page 123 - Shank receptions
A – mm B – mm 123 U-Shank: for Black & Decker, Kress, Ryobi, Skil. Material Cutting oil Turpentine Water Coolant ■ ■ The blade length represents the section of the blade with cutting teeth (A–mm). The tooth pitch is measured in millimetres (mm) from tooth point to tooth point (B–mm). Selecting t...
Page 124 - Traditional blades; Fast cut blades; Jigsaw blades for wood and plastic
124 Depth of cut in mm Blade length (toothed) mm Tooth pitch mm Ref. No. Qty. Id. No. 4932 EAN Code 4002395 Traditional blades Traditional blades that deliver good and solid performance. 50 2 T 119 B 5 274353 301553 < 20 < 20 ● £5.39 75 3 T 111 C 5 254071 * 301539 5 – 50 < 40 ● £4.59 T-Shan...
Page 125 - Precise straight cutting blades: kitchen worktops
125 Fast and clean cutting blade Triple sharpened tooth geometry for fast and super clean splinter free cuts. Plunge tip for fast plunging. 91 2.5 T 234 X 5 430141 378029 3 – 60 3 – 60 ● < 45 ● £10.95 Blade length (toothed) mm Tooth pitch mm Ref. No. Qty. Id. No. 4932 EAN Code 4002395 Clean and s...
Page 126 - Jigsaw blades for metal
126 Depth of cut in mm Blade length (toothed) mm Tooth pitch mm Ref. No. Qty. Id. No. 4932 EAN Code 4002395 List Price exc. VAT Traditional blades Blade reference 274652 is especially suited to cutting very thin sheet material because of its low 0.7 mm tooth pitch. For those professionals desiring e...
Page 127 - Special application: aluminium; Special application: stainless steel; Jigsaw blades for special materials
127 Blade length (toothed) mm Tooth pitch mm Ref. No. Qty. Id. No. 4932 EAN Code 4002395 List Price exc. VAT Blade length (toothed) mm Tooth pitch mm Ref. No. Qty. Id. No. 4932 EAN Code 4002395 List Price exc. VAT Depth of cut in mm Depth of cut in mm Special application: aluminium Most traditional ...
Page 128 - Jigsaw blade sets – T-Shank reception; Jigsaw blades – special reception
128 Description M12 JS HD18 JS/JSB BST 18 X Li JS 120 X JSPE 135 TX STEP 1200 BX / X JSPE 90 X FSPE 110 X BSPE 110 QX STEP 800 X ST 800 XE V28 JSB STEP 70 STEP 75 ST 700 E STEP 90 X STEP 100 X FSPE 100 XL BSPE 100 XL Id. No. 4932 EAN Code 4002395 List Price exc. VAT Gliding shoe for materials ...
Page 129 - Ø mm; Circular saw blades for portable tools; Circular saw blades for cordless tools; Circular saw blades for wood
129 Ø mm Circular saw blades for portable tools Ø mm A Ø mm B Number of teeth Cutting width (kerf) mm Solid wood Chipboar d MDF / Fibr eboar d Laminated chipboar d Block boar d Plywood & OSB boar ds Plastics Plasterboar d, br eeze block, cemented plywood Non FE metals, pr ofiles, alu Clean / Fin...
Page 130 - Optimising Blade Life; Material guide; Circular saw blades for metal
130 ■ ✔ ■ ■ Most suitable. Recommended for these materials. ■◆ Suitable. Recommended for intermittent use in these materials. Very good cutting characteristics, but greatly reduced lifetime of the blade. ■ ✖■ Not suitable. Not recommended for these materials. Optimising Blade Life 1. Clamp...
Page 131 - System accessories – Circular saws
131 Description HK 46 N K 55/S K 66/S CS 55 PCS 55 SCS 65 Q CS 75 HKS 75 HK 75 A HKS 85 PMS 18 Id. No. 4932 UPC / EAN Code 4002395 List Price exc. VAT Clean Line system with bag holder and 3 paper bags. ● ● 346123 13266 £40.05 Cloth bag requires bag holder 346123. ● ● 346182 13273 ...
Page 132 - MAGSWITCH; Magswitch
C A B C A B 132 A traditional welding clamp cannot compare! Milwaukee ® Magswitch ™ Welding Ground Clamps let welders quickly set up, weld and move on to the next job. Simply place it on a clean work surface, turn it on and start welding. It makes welding quicker and easier than ever. Safes time and...
Page 134 - Titanium delivers 97% of the swing energy to the nail.; Less arm pain and vibration:; Drives up to 30% more nails with the same effort.; Tools has been renowned worldwide for premium; hammers
134 Hitting power: Titanium delivers 97% of the swing energy to the nail. Durability: More flexible and fracture resistant than steel. Accepts harder impacts without distorting the overall shape of the hammer. One-piece design – strength built in from the head right through to the handle providi...
Page 135 - Spare parts
135 Model No. oz. g Face (milled or smooth) Inch mm Id. No. 4932 EAN Code 4002395 List Price exc. VAT Ti14MC-H18 14 397 M 18˝ 457 352583 372416 £115.95 Ti14SC-H18 14 397 S 18˝ 457 352584 372423 £114.95 Ti14MC-H16 14 397 M 16˝ 406 352585 372430 £113.95 Ti14SC-H16 14 397 S 16˝ 406 ...
Page 136 - Handtools
136 Description / Application Quantity Id. No. UPC Code 45242 List Price exc. VAT Self-retracting safety knife 1 48221915 296873 £12.95 ■ ■ Self-retract mechanism: retracts blade when the button is released. ■ ■ Two blade positions allows user to control cutting depth. ■ ■ Blade storage hold...
Page 138 - Long nose pliers with wire stripper –
138 ■ ■ Long nose pliers: specially suitable for gripping, bending and adjusting in resctricted areas. ■ ■ Wire stripper: strips 3 sizes of wire: 0,5 – 0,75 / 1,5 / 2,5 mm². ■ ■ Wire cutter: cuts wire up to 2.8 mm. ■ ■ Deburrer: deburring ribs on head for up to 25 mm pipe. No need for extra tools. ■...
Page 139 - Heavy Duty Lineman’s pliers; Plastic cutter
139 ■ ■ Pliers: specially suitable for gripping, bending and adjusting in restricted areas. ■ ■ Wire stripper: strips 5 sizes of wire: 0,5 – 0,75 / 1,0 / 1,5 / 2,5 / 4,0 mm². ■ ■ Wire cutter: cuts wire up to 2.5 mm. ■ ■ Deburrer: deburring ribs on head for up to 25 mm pipe. No need for extra tools. ...
Page 140 - Diagonal pliers
140 ■ ■ For all around cutting use. ■ ■ Tip protection: tips are off set ground to protect cutting edges from damage when dropped. ■ ■ High leverage design: long handles for maximum cutting power and leverage. ■ ■ Deburrer: deburring ribs on head for up to 25 mm pipe. No need for extra tools. ■ ■ 15...
Page 141 - Tape measures
141 ■ ■ Double sided nylon bond blade protection for extreme tape durability against dust, dirt, debris and water. ■ ■ Non reflective blade coating makes the tape anti-glare and easier to read in bright sunlight. ■ ■ Finger stop for comfortable hold and finger protection when the blade retracts. ■ ■...
Page 142 - Expander heads
142 Expander heads Pipe Ø mm Pipe wall thickness mm Pipe pressure bar Tool suitability Id. No. 4932 EAN Code 4002395 List Price exc. VAT PXPH9.9-144/8 9.9 1.1 4 / 8 430102 377633 PXPH12I-14 12 1.7 / 1.8 / 2.0 6 – 10 352716 373741 PXPH15N-14 14 / 15 2.5 6 – 10 352727 373857 PXPH16I-1406 16 1.5 / ...
Page 143 - System accessories – Hot air guns
143 Description PT 600 EC Quan- tity Id. No. 4932 EAN Code 4002395 List Price exc. VAT Flat jet nozzle ● 1 312435 300518 £4.86 Round jet nozzle Ø 12 mm ● 1 312436 300525 £3.13 Description SMC 1.2 Q PPS 12 (cordless) KS 2.5 S 2.5 Quantity Id. No. 4932 UPC / EAN Code 4002395 List Price exc. VAT Piston...
Page 144 - System accessories – Nibblers; System accessories – Stone saw
144 Description KN 2 N 2 PN 14.4 PN 12 (cordless) Quantity Id. No. 4932 EAN Code 4002395 List Price exc. VAT Punch ● ● 1 430172 378333 £110.08 Die ● ● 1 279565 308521 £120.56 Special die Especially designed for cutting corrugated steel; max. cutting capacity 1.5 mm. ● ● 1 279498 308514 £139....
Page 145 - Transport cases; USB Power Source – M18; – Powers the jacket on M18; 2 V Car Plug – 12 V CP HJ; Powers the jacket on any 12 V cigarette style outlet.
145 Tool cases (plastic) Id. No. 4932 EAN Code 4002395 List Price exc. VAT Cases supplied with latches and foam insert. Size 1 (L x W x H) 475 x 358 x 132 mm 378986 349401 £64.03 Size 2 (L x W x H) 475 x 358 x 192 mm 383162 349463 £81.57 Spare latches (2pc) 373252 347247 £7.99 Produc...
Page 147 - Press jaws
147 Press jaws Jaw profile Fits to following pipe systems suppliers Nominal size Tool suitability Jaw model description Id. No. 4932 EAN Code 4002395 List Price exc. VAT M Geberit: Mapress VSH: X-Press Eurotubi Raccorderie Metallique Rubinetterie Bresciane Sanha: Nirosan Yorkshire M12 J12-M12 4302...
Page 149 - Chargers
149 Description System Charging range Charging time NiCd NiMH Li-Ion Id. No. 4932 EAN Code 4002395 List Price exc. VAT TCA 7224 MB PBS 3000 7,2 – 24 V 12 min. ● ● – 399035 356393 RCA 7224 MB PBS 3000 7,2 – 24 V 47 min. ● ● – 386670 352388 M4 C M4 4 V 30 min. – – ● 352958 376162 C12 C M12 12 V 40 / 8...
Page 150 - Batteries
150 Description System Battery type Voltage V Battery pack capacity Ah Id. No. 4932 EAN Code 4002395 List Price exc. VAT M4 B2 M4 Li-Ion 4 2.0 430098 377596 M12 B2 M12 Li-Ion 12 2.0 430064 377251 M12 B4 M12 Li-Ion 12 4.0 430065 377268 M14 B M14 Li-Ion 14.4 1.5 352665 373239 M14 B4 M14 Li-Ion 14.4 4....
Page 152 - SDS-plus RX4 4 cut drill bits
B A Ø A B Ø 4932 373696 4002395 353927 Pos Display material Quantity Id. No. 4939 EAN Code 4002395 1 1 m Assembled row 1 565637 933228 2 Euro hook (short) 19 565627 933129 3 Milwaukee header strip 1 510100 900596 4 Barcode label strip SDS-plus drill bits EU 1 530434 914135 5 Carton 1 4931373861 ...
Page 153 - meter row – GB
A B Ø A A B A B A B Ø 4932 373697 4002395 353934 Pos Ø mm A mm B mm Quantity Id. No. 4932 EAN Code 4002395 1 8 460 400 5 367013 336692 2 10 310 250 5 353824 320172 3 10 450 400 5 344296 312245 4 12 260 200 5 344297 312238 5 12 450 400 5 307077 308934 6 14 260 200 5 307079 308958 7 14 450 400...
Page 155 - Metal drill bits HSS Rollforged –; Concrete drill bits round shank –
B A Ø A B Ø Pos Ø mm A mm B mm Quantity Id. No. 4932 EAN Code 4002395 1 1.0 34 12 5 363565 330669 2 1.5 40 18 5 363566 330676 3 2.0 49 24 5 363567 330683 4 2.5 57 30 5 363568 330690 5 3.0 61 33 5 363570 330713 6 3.2 65 65 5 363571 330720 7 3.5 70 39 5 363572 330737 8 4.0 75 43 5 363573 330744 9 ...
Page 159 - SHOCKWAVE Impact Duty
A A A Pos Size A mm Quantity Id. No. 4932 EAN Code 4002395 1 PH 1 25 5 352430 370894 2 PH 1 90 5 352431 370900 3 PH 2 50 5 352432 370917 4 PZ 1 25 5 352435 370948 5 PZ 2 25 5 352436 370955 6 PZ 2 50 5 352437 370962 7 PZ 3 25 5 352438 370979 8 TX 15 25 5 352440 370993 9 TX 20 25 5 352441 37...
Page 160 - metal – 1 meter row
Pos Blade length (toothed) mm Tooth pitch mm Ref. No. Quantity Id. No. 4932 EAN Code 4002395 1 75 4.0 T 144 D 5 213116 301492 2 75 2.5 T 101 B 5 254061 301522 3 105 4.0 T 301 DL 5 346071 312399 4 75 4.0 T 101 D 5 274351 301515 5 75 4.0 T 244 D 5 346078 312375 6 75 2.5 T 101 BR 5 346079 312382 7 75 4...
Page 166 - Red Rack – GB; chisels – Red Rack – GB
A B Ø A A B A B Ø A A B SDS-plus 2 cut drill bits & chisels Red Rack – GB Pos Ø mm A mm B mm Quantity Id. No. 4932 EAN Code 4002395 1 5.5 110 50 5 352009 368907 2 5.5 160 100 5 352010 368914 3 6 110 50 5 352011 368921 4 6 160 100 5 352012 368938 5 6 210 150 5 352013 366705 6 6.5 21...
Page 168 - Metal drill bits HSS-Rollforged –
A B Ø A B Ø Pos Display material Quantity Id. No. 4939 EAN Code 4002395 1 Red Rack / Header Card 1 434075 930852 2 Euro hook (short) 20 434076 920655 3 Euro hook (long) 3 434077 920662 4 Re Order Tag Set (10pcs) 3 434080 920648 5 Barcode label set HSS-R metal drill bits 1 434083 920570 6...
Page 172 - Techtronic Industries UK Ltd
All data incl. service and warranty conditions as well as product range are subject to change without notice. Pictures not binding. No liability for printing errors or mistakes. (4939596211) – 05/14 – Copyright 2014 – Milwaukee Electric Tool Distributed by: Techtronic Industries UK Ltd
Milwaukee 2630-20 SER# B57A
User Manual
Milwaukee 6147-31
Manual
Milwaukee 42-70-0110
Manual
Milwaukee 5317-59A
Manual
Milwaukee 6850
Manual
Milwaukee 8988-20
Manual
Milwaukee 0522-20
Manual
Milwaukee 6560 Series
Manual
Milwaukee 2406-20
Manual
Milwaukee 1101-1
Manual
Milwaukee 5374-59B
Manual
Milwaukee 0719-20
Manual
Milwaukee 2410-059
Manual
Milwaukee 54-46-0101
Manual
Milwaukee 2461-20
Manual