Page 2 - INDEX; “GWIZ-KIT” SALES BRIEFCASE
T he Duro-Last Tool Catalog has been created to provide our contractors and sales represent- atives with an easy-to-use reference on all the tools that are available through Duro-Last. With a description of each tool, along with a photo and item number, this catalog will come in handy when you need ...
Page 3 - MISCELLANEOUS TOOLS; TAPE MEASURE 12 ́
SCISSORS (9˝ FISKARS) Item #1193 For virtually all roof installations, it is necessary to cut the Duro-Last membrane. These scissors are designed for the harsh rooftop environment. UTILITY KNIFE Item #1195 This utility knife is convenient forcutting the Duro-Last membrane. TAPE MEASURE 10´(CUSTOM ST...
Page 6 - MEMBRANE INST; KNEE PULLER; PULL-TITE VISE GRIP WITH CABLE
D/L START PC RATCHET SYSTEM Item #1814 Consists of a modified 4˝ vise grip attachedto a ratchet strap. This tool is used to start decksheets and parapets by pulling the reverse tab and first tab straight, thus making the installation of the prefabricated roof sectioneasier and faster. Note: The vise...
Page 7 - D/L RATCHET VISE GRIP; PANDUIT TOOL
MEMBRANE INST ALLA TION TOOLS 7 [email protected] D/L RATCHET VISE GRIP Item #1815 The modified vise grip is used only withthe D/L Start PC Ratchet System. This toolhas a 4˝ wide “duck bill” clamp that gripsthe membrane. WIDE VISE GRIP Item #1196 Used to grip the Duro-Last roof membrane and pull i...
Page 8 - THE GRIPULL
www.duro-last.com THE GRIPULL 8 THE GRIPULL ® Item #1800 An installation tool used to align theDuro-Last material properly and to assist in removing wrinkles from the deck sheet. Note: The GriPull is required to installall Duro-Last roofing systems. Two GriPulls are recommended for allprojects to op...
Page 9 - GRIPULL ACCESSORIES; THE GRIPULL ACCESSORIES
GRIPULL ACCESSORIES 9 [email protected] THE GRIPULL ACCESSORIES Item #1800 Vise Grip Kit Item #1786 Extension Tube Assembly Kit Item #1788 Push Link Assembly Kit Item #1787 Contact Bracket Set Item #1785 Handle Assembly KitItem #1789 Sold separately. (For Item #1800) Kit includes: 1 ⁄ 2 ˝ E-Clips ...
Page 10 - CONTACT BRACKET SET; VISE GRIP KIT
www.duro-last.com CONTACT BRACKET SET 1 Contact Bracket RH, 1 Contact Bracket LH, 4 Carriage Bolts, 4 Lock Washers, 4 Hex Nuts Item #1785 Contact Bracket RH 5 ⁄ 16 ˝ – 18 X 3 ⁄ 4 ˝ Carriage Bolts (4) 5 ⁄ 16 ˝ – 18 Hex Nuts (4) 5 ⁄ 16 ˝ Lock Washers (4) Contact Bracket LH Note: Cable is sold separate...
Page 11 - EXTENSION TUBE ASSEMBLY KIT; HANDLE ASSEMBLY KIT
[email protected] EXTENSION TUBE ASSEMBLY KIT 1 Cable Guide, 1 Spring Pin, 1 Retaining Ring, 1 Extension Pulley Pin with Cotter Ring, 1 Extension Pulley Item #1788 15 ⁄ 16 ˝ Retaining Ring Item #1807 Extension Pulley Item #1802 3 ⁄ 8 ˝ x 1 1 ⁄ 8 ˝ Extension Pulley Pin with Cotter Ring 3 ⁄ 4 ˝ Item...
Page 12 - PUSH LINK ASSEMBLY KIT
www.duro-last.com Roller Shaft 3 ⁄ 8 ˝ x 1 1 ⁄ 4 ˝ Cable Anchor 3 ⁄ 4 ˝ Cotter Rings (2) Item #1809-003 3 ⁄ 8 ˝ x 1˝ Link Pivot Pin Item #1797 Requires 1 ⁄ 2 ˝ E-Clips (4) Item #1791 (Includes only 1 E-Clip) Sold separately. GRIPULL ACCESSORIES 12 Kit includes: Roller Shaft (2) and 1 ⁄ 2 ˝ E-Clips (...
Page 14 - AND-UP GRIPULL ACCESSORIES
D/L ST AND-UP GRIPULL ACCESSORIES 14 CONTACT BRACKET SET 1 Contact Bracket RH, 1 Contact Bracket LH, 4 Carriage Bolts, 4 Lock Washers, 4 Hex Nuts Item #1785 HANDLE ASSEMBLY KIT 1 Handle, 1 Grip, 2 E-Clips, 1 Handle Pivot Pin, and 1 Retaining Pin Item #1783 Contact Bracket RH 5 ⁄ 16 ˝ – 18 X 3 ⁄ 4 ˝ ...
Page 17 - POWER HAND TOOLS & ACCESSORIES; HILTI
[email protected] POWER HAND TOOLS & ACCESSORIES 17 HILTI ® SCREW GUN ST-1800 Item #1273 An adjustable torque screw gun that can be used with single self-drilling screws.The 18-position adjustable torque clutch reduces fastener overdrive, and the snapon/off adjustable depth nose provides consi...
Page 19 - DRILL BITS
DRILL BITS All drill bits in the Duro-Last price list are available in 3 / 16 ˝, 7 / 32 ˝, 1 / 4 ˝, 7 / 16 ˝, and 1 / 2 ˝ diameters in the lengths shown on page 20. Note: Deduct 2˝ for actual useable length. Duro-Last carries straight (STR) bits, spline drive system (SDS) bits, and TE-CX bits.TE-CX ...
Page 21 - HOT AIR WELDING TOOLS
2˝ SILICONE ROLLER Item #1301 A roller used to put pressure on membranematerial in the welding process as heat is applied. NOTE: Either Item #1301 or Item #1301 ERG is required to install all Duro-Last roofing systems. 2˝ ERGONOMICSILICONE ROLLER Item #1301 ERG An ergonomically-designed roller with ...
Page 25 - GILLETTE
GENERA TORS 25 [email protected] GILLETTE ® GENERATOR MODEL GPN-125EH (Drop Ship Only) A portable generator with maximum KW power of 12,500 watts and ratedamps/120 VAC-92 and amps/240 VAC-46. This easy-to-use generator carries a Kleen Power ® Wave signal (power is filtered) and is recommendedfor d...
Page 26 - HOT AIR WELDING TOOL ACCESSORIES; Heating Element; HEAT GUN ACCESSORIES; Screen & Louver Filter
26 www.duro-last.com HOT AIR WELDING TOOL ACCESSORIES Heating Element Item #1206 For use with Leister 1G3Triac Heat Gun or Leister1A Triac Heat Gun. Triac Brush Item #1199 For use with Leister 1A TriacHeat Gun. Sold individually.(Requires 2 brushes.) HEAT GUN ACCESSORIES NOTE: Many of the following ...
Page 27 - 0K Potentiometer; HEAT GUN REPAIR
HOT AIR WELDING TOOL ACCESSORIES 27 20K Potentiometer Item #1160 For use with Leister 1G3 TriacHeat Gun or Leister 1A TriacHeat Gun. 40mm Triac Nozzle Item #1207 For use with Leister 1G3 TriacHeat Gun or Leister 1A TriacHeat Gun. On-Off Switch Item #1159 For use with Leister 1G3 TriacHeat Gun or Lei...
Page 28 - HAND RIVETER; ̋ OFFSET HAND SEAMER
SHEET MET AL TOOLS 28 www.exceptionalmetals.com HAND RIVETER Item #3808 Pulls 1 ⁄ 8 ”- 3 ⁄ 16 ” rivets. Nose piece is adjustable and can be used to pullrivets straight out in confined spaces. 3˝ OFFSET HAND SEAMER Item #3805 Used to flatten, seam, and bend sheet metallocated in overhead or confined ...
Page 29 - OFFSET AVIATION SNIP LEFT
29 SHEET MET AL TOOLS OFFSET AVIATION SNIP LEFT Item #3802 Cuts left curves and straight lines. Offsetdesign makes longer cuts with ease. OFFSET AVIATION SNIP RIGHT Item #3801 Cuts right curves and straight lines.Offset design makes longer cuts with ease. [email protected] PATTERN SNIP Item #3803 ...