Milwaukee 0240-20 - Manuals

model-name

Milwaukee 0240-20 Drill – User Manual, Manual in PDF format online.

Manuals:

User Manual Milwaukee 0240-20

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13

Summary

Page 2 - READ ALL SAFETY WARNINGS AND INSTRUCTIONS.; fl

2 3 PERSONAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY ELECTRICAL SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmo- spheres, such as in the presence of fl ammable liquids, gases or dust. Power tools ...

Page 3 - READ AND SAVE ALL

4 5 SPECIFIC SAFETY RULES • Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. SE...

Page 4 - Forward

6 7 WARNING To reduce the risk of injury, wear safety goggles or glasses with side shields. Chuck Removal This tool is equipped with a threaded spindle to hold the chuck. Before removing the chuck, unplug the tool and open the chuck jaws. A left-handed thread screw is located inside the chuck to pre...

Manual Milwaukee 0240-20

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13

Summary

Page 2 - READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.; fl; Loss of control can cause personal injury.

2 3 PERSONAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY ELECTRICAL SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmos- pheres, such as in the presence of fl ammable liquids, gases or dust. Power tools ...

Page 3 - MILWAUKEE; READ AND SAVE ALL; Hold power tool by insulated gripping surfaces,; Cutting accessory contacting a “live”

4 5 Grounded Tools: Tools with Three Prong Plugs Tools marked “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet (See Figure A). If the tool should electrically malfunction or break down, grounding provides a low resis...

Page 5 - LIRE TOUTES LES RÈGLES ET INSTRUCTIONS DE SÉCURITÉ.; LIMITED WARRANTY - USA AND CANADA

8 9 RÈGLES DE SÉCURITÉ GÉNÉRALES RELATIVES AUX OUTILS ÉLECTRIQUES AVERTISSEMENT LIRE TOUTES LES RÈGLES ET INSTRUCTIONS DE SÉCURITÉ. Ne pas suivre l’ensemble des règles et instructions peut entraîner une électrocution, un incendie ou des blessures graves. Conserver les règles et les instructions à de...

Milwaukee Drills Manuals