Miele PG 8083 SCVi - Manuals

Proper use ~ The dishwasher is designed only for operation with water and theappropriate cleaning agents. Organic solvents must not be used in themachine. An explosion or machine corrosion could occur with the use oforganic solvents.Follow the instructions and relevantsafety procedures carefully. ~ ...

Overview a Upper spray arm (not visible) b Cutlery tray c Upper basket d Middle spray arm e Air inlet for drying f Lower spray arm g Filter combination h Data plate i Optical interface j Rinse aid reservoir k Dual-compartment detergentdispenser l Reservoir for regenerating salt Guide to the commerci...

Control panel a Display b 4 ü button, (other programs) with indicator light c Delay start buttonwith indicator light d Extra drying buttonwith indicator light e Program selection f Program button for programselection g - button (On/Off) with indicator light h Optical interface Guide to the commercia...

Disposal of the packingmaterial The cardboard box and packagingprotect the appliance during shipping.These materials are biodegradable andrecyclable. Please recycle. Ensure that any plastic wrappings,bags etc. are disposed of safely andkept out of the reach of children.Danger of suffocation! Disposa...

Energy saving washing This dishwasher is exceptionallyeconomical in the use of water andelectricity. For best results follow thesetips: ^ You may connect the commercialdishwasher to a hot water line. This isparticularly suitable withenergy-saving water heating sourcessuch as solar energy systems.If ...

Opening the door At the end of programs with a dryingcycle (see Program guide) the door willautomatically open a little in order toimprove the drying.You can cancel this function (seeSettings menu - AutoOpen drying). ^ Pull the handle to open the door. If the door is opened during operationthe dishw...

Display General The following functions can be selectedor set with the display: – the wash program– the Delay start time– the settings The following appears in the displaywhile a program is running: – the present program step– the remaining runtime– any faults or other messages In order to save ener...

Basic settings ^ Press the - button to turn the dishwasher on. If the dishwasher is being turned on forthe first time, the welcome screen willappear. Language The display automatically switches tothe language setting. See "Display" for details. ^ Select the desired language andpress the cent...

Every dishwasher is tested beforeleaving the factory. Any waterremaining in the machine is from thefinal factory test and does notindicate that the machine has beenused. Filling the salt container To achieve good cleaning results, thedishwasher needs soft water (water thatis low in minerals). Hard w...

^ Only open the door half way when adding salt to avoid spilling it. ^ Press the button on the top of the saltreservoir in the direction of the arrow.The cover will pop open. ^ Open the funnel. Do not fill water into the salt reservoir! ^ Only add just enough salt to fill thereservoir. Depending on ...

Refill salt indicator ^ Refill the salt reservoir as soon as the F Refill salt message is displayed. ^ Press the center button to confirm. The Refill salt indicator goes out. If a sufficiently high concentration ofsalt has not yet formed, Refill salt maycontinue to be displayed after addingthe salt....

Rinse aid Rinse aid helps to prevent spotting ondishes and glassware and speeds upthe drying process.The rinse aid is filled into the reservoirand the set amount will beautomatically dispensed. , Use rinse aid only. Never fill the rinse aid reservoir with regulardishwashing detergent or cleaningagen...

Tips: Remove coarse food residues from thedishware. There is no need to rinse items beforeloading into the dishwasher. , Do not wash items soiled with ash, sand, wax, grease or paint inthe dishwasher.These materials damage thedishwasher. All items can be placed anywhere inthe baskets. However, note ...

Typical load for 10 place settings with cutlery tray Upper basket Lower basket Cutlery tray Loading the dishwasher 24

Typical load for 16 place settings with cutlery tray Upper basket Lower basket Cutlery tray Loading the dishwasher 25

Upper basket , Always use the dishwasher with the upper and lower basket inserted. ^ Load the upper basket with small,lightweight, or delicate items such ascups, saucers, glasses, dessertbowls, etc.Shallow pans can also be placed inthe upper basket. ^ Long items such as soup ladles,mixing spoons and...

Lower basket ^ Place larger and heavier items suchas plates, serving platters,saucepans, bowls, etc. in the lowerbasket.It can also be used for glasses, cups,small plates and saucers. Commercial dishwasher with cutlerytray Heavily soiled items ^ Place very large plates in the centerof the lower bask...

Cutlery Split cutlery tray ^ Arrange the cutlery in the tray asshown. To make unloading much easier,cutlery can be grouped in zones, onefor knives, one for forks, one forspoons, etc. Spoon heads should be placed incontact with at least one of the serratedretainers on the base of the cutlery trayto e...

Optional dishwasher accessories are available from your Miele dealer, Miele orMieleusa.com (depending on your model some may already be supplied with yourmachine as standard). If you would like to... the following accessory will needto be ordered... ...wash a Miele Cappuccinatore ... a Cappuccinator...

Detergent , Avoid inhaling powder detergents. Avoid swallowingdishwasher detergent! Detergentscan cause chemical burns to nose,mouth and throat. Consult a doctorimmediately if detergent has beenswallowed or inhaled. , Always keep detergent out of the reach of children. Keep childrenaway from the dis...

Adding detergent ^ Press the button on top of thedetergent dispenser. The cover willpop open. The cover is always open at the end ofa program. ^ Add detergent to the compartmentsand close the cover. ^ Do not forget to close the detergentcontainer. Otherwise, the detergentmight clump. Detergent dosin...

Turning the dishwasher on ^ Open the water supply if it is closed. ^ Open the door. ^ Make sure the spray arms can rotatefreely. ^ Press the - button to turn the dishwasher on. The factory-set ECO program willappear in the display and the matchingindicator light will come on.After a short while, the...

End of program At the end of a program, the opticalinterface flashes with the door closed. The program has finished when O End or AutoOpen is displayed and the door is slightly ajar. If Extra drying was selected andAutoOpen is active, the drying fanwill run for a few minutes after theprogram has end...

Program sequence Pre- rinse Main wash Interim rinse I Interim rinse II 2) Final rinse Drying Extra drying Auto Open Water plus X 149°F (65°C) 1 min X 10 s (X) X 149°F (65°C) 3) 30 s (X) 4) (X) X 149°F (65°C) 10 min X 3 min (X) X 149°F (65°C) 3) 1.5 min (X) (X) (X) X 8 min X 167°F (75°C) 10 min X 3 m...

Extra drying For better drying results and to reducethe amount of steam that escapes whenthe door is opened, the Extra dryingfunction extends the fan runtime at theend of the program.This function is not available for allprograms. When Extra drying is selected, the totalprogram runtime will increase...

Delay start The start time of a program can bedelayed from 30 minutes to 24 hours.The delay is set in 30 minuteincrements. When using the Delay start function,make sure that the detergentcompartment is dry before addingdetergent. Wipe dry if necessary.Otherwise the detergent couldclump and not rinse...

BrilliantLight The commercial dishwasher isequipped with interior lighting.The lighting switches off automaticallywhen the door is open for longer than15 minutes. You can permanently switch off theinterior lighting. ^ Swing the door of the dishwasherhalfway open and closed quicklythree times. Move t...

Settings menu for changingstandard settings Opening the Settings menu ^ If the dishwasher is on, press the - button to turn it off. ^ Press and hold the X button. ^ Press the - button to turn the dishwasher on, and hold the X button down for at least 4 moreseconds. The first option of the Settings m...

Water hardness Your dishwasher comes with with awater softener.You must set the system to the waterhardness level of your water supply. – The dishwasher must be programmed to exactly match thehardness of your water. – Your local waterworks can tell you the water hardness level in your area. – Where ...

Rinse aid For best results the rinse aid dosagecan be adjusted.The dosage can be set between 0-6 ml.The factory setting is 3 ml of rinse aid. – Use a higher setting if spots appear on dry glassware. – Use a lower setting if streaking appears on dishes or glasses. ^ Select the desired amount of rinse...

AutoOpen To improve drying, the doorautomatically opens a little at the end ofa program, except for Pre-rinse, Shortand Beer glasses (see Program guide). With the Universal, Intensive andGlassware programs, AutoOpen canonly be activated by selecting Extradrying (see "Additional options - Extradr...

The refill messages can be turnedoff without first refilling to let thedishwasher go into Standby mode.But the fault messages cannot beturned off. Refill messages If you want the dishwasher to switch toStandby mode in spite of a refillmessage, you can switch both indicatorlights off together. ^ Sele...

Detergent dosage This function becomes visible whenExternal DOS is activated. You can set the detergent dosage inmilliliters or percent according to themanufacturer's instructions if you haveinstalled the DOS module G 60 Semi forliquid detergent. – Unit of measurement in ml The factory setting is 30...

Factory default You can reset all settings back to thefactory default settings. An activatedExternal Dos and its respective amountof detergent or dosage concentrationwill not be reset. ^ Select Reset and press the center button to confirm. Select last program You can chose whether to preset theNorma...

Check the overall condition of yourdishwasher regularly (approx. every4 - 6 months). This will help toprevent problems. , The outer surfaces of the dishwasher are susceptible toscratching.Contact with unsuitable cleaningagents can alter or discolor the outersurfaces. Cleaning the wash cabinet The wa...

Triple filter system The triple filter system in the base of thewash cabinet retains coarse dirt fromthe suds solution, preventing it fromreaching the circulation system andre-entering the cabinet through thespray arms. , The dishwasher must not be used without all the filters in place. Collection o...

Cleaning the spray arms Particles of food can get stuck in thespray arm jets and bearings. The sprayarms should therefore be checkedregularly (approx. every 4 - 6 months). ^ Turn the dishwasher off. Remove the spray arms as follows: ^ Pull out the cutlery tray (if present). ^ Push the upper spray ar...

, Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairscould cause personal injury or machine damage. Technical faults Problem Possible fault Solution The dishwasher doesnot start. The door is not properlyc...

Faults in the water intake or water drain Problem Possible fault Solution The optical interfaceflashes fast.The buzzer sounds.One of the followingfault messages isdisplayed: 2 Open the water supply The water supply isclosed. Open the water supply allthe way. 2 Water intake Before fixing the fault: –...

General problems with the dishwasher Problem Possible fault Solution The indicator lightsand the display aredark. Only theindicator light - flashes slowly. The indicators and thedisplay turn offautomatically to saveenergy (Standby). Press the - button to come out of Standby mode. The interior lighti...

Noises Problem Possible fault Solution There is a knockingnoise in the washcabinet. A spray arm is hitting thedishware. Interrupt the program andrearrange items blockingthe spray arms. There is a rattlingnoise in the washcabinet. Dishware is movingaround in the washcabinet. Interrupt the program and...

Poor cleaning results Problem Possible fault Solution The dishes are notclean. The dishes were not loadedcorrectly. See "Loading thedishwasher". The program was not suitablefor the requirements. Select a more suitableprogram (see "Programguide"). Not enough detergent wasdispensed. Us...

Problem Possible fault Solution Dishes are not dry,or glasses andcutlery are spotty. The rinse aid dosage is settoo low or the rinse aidreservoir is empty. Refill the reservoir, increasethe dosage, or switch therinse aid product whenrefilling (see "Rinse aid"). The dishes were taken outtoo s...

Problem Possible fault Solution Glasses have abrownish-bluediscoloration; thedeposit cannot bewiped off. Detergent deposits. Switch to another detergentright away. Glasses are dull anddiscolored; thedeposit cannot bewiped off. The glasses are notdishwasher-safe. Surfacechanges occur. There is no rem...

Cleaning the water supplyscreen There is a screen in the screwconnection of the water inlet hose toprotect the water inlet valve. The screenmust be cleaned when dirty, otherwiseinsufficient water will flow into the washcabinet. , The plastic housing of the water connection contains an electricvalve....

Repairs In the event of a fault which you cannotcorrect yourself please contact theMiele Service Department at the phonenumber on the back of this booklet. ^ Please quote the model type andnumber of your appliance. These can be found on the data platealong the right edge of the door. PC Update The P...

, All electrical work must be performed by a qualified servicetechnician in accordance with localand national safety regulations. – The electrical connection is made through a plug and outlet accordingto national requirements. The outlethas to be easily accessible afterinstallation. This facilitates...

The PG 8083 SCVi comes equippedwith a 14/3 AWG cord for connection toa standard AC 120 V, 60 Hz poweroutlet with a NEMA 5-15P plug or with a10/4 AWG cord for connection to a 2NAC 208/240 V, 60 Hz power supply witha NEMA Type 14-30P plug. 120V 208-240V Rated Load (kW) 1.3 5.0 Fuse Rating 15A 30A Elec...

The Miele waterproof system Providing the dishwasher was installedcorrectly by a qualified technician, thewaterproof system will protect you fromwater damage throughout the lifetime ofthe machine. Connection to the water inlet This machine must be connected tothe water supply in accordance withall n...

Water drainage – The drain is equipped with a non-return valve which preventswaste water from flowing back intothe dishwasher through the drainhose. – The dishwasher drain hose should be connected to a separate drain for the dishwasher only.If no separate drain is available, werecommend connecting i...

ModelCommercial dishwasher PG 8083 SCVi Height 33 1/4" (84.5 cm)[adjustable +2 9/16" (6.5 cm] Installation height min. 33 1/4" (84.5 cm) [+2 9/16"(6.5 cm)] Width 23 3/16" (59.8 cm) Installation width 23 5/8" (60 cm) Depth 22 7/16" (57 cm) Weight 127 lbs (57.5 kg) Voltage ...

General requirements for measuring noise The dishwasher must be loaded with 16 place settings and the Normal program must be used. Installation requirements for measuring noise The dishwasher must be installed as follows:. ^ Install the dishwasher into an appropriate housing unit. ^ Secure the front...

^ Push the insulation mat supplied (depending on model) under the plinth until itis up against the appliance feet a . ^ Attach the toe-kick so that it is flush with the door front b . Noise measurement 80