Miele G7970 SCVi - Manuals

Contents 5 Spray arm fault .................................................................................................... 110General problems with the dishwasher ............................................................... 111Noises..............................................................

Warning and safety instructions 6 This dishwasher conforms to current safety requirements. Inappro-priate use can, however, lead to personal injury and material dam-age. Please observe the installation sheet and read the operating in-structions carefully before setting up the dishwasher and using it...

Warning and safety instructions 7 Appropriate use  This dishwasher is intended for use in domestic households and similar working and residential environments.  This dishwasher is not intended for outdoor use.  This dishwasher is intended for use at altitudes of up to 4000 m above sea level.  Th...

Warning and safety instructions 8 Safety with children  Children under 8 years of age must be kept away from the dish- washer unless they are constantly supervised.  Children aged 8 and older may only use the dishwasher without supervision if they have been shown how to use it in a safe manner.Chi...

Warning and safety instructions 9 Technical safety  Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and re-pairs must only be carried out by a qualified technician.  Damage to the dishwasher can compromise your safety. Before...

Warning and safety instructions 12  We recommend replacing defective components with original spare parts. If original Miele spare parts are installed correctly, Mieleensures full compliance with safety requirements and the warrantyremains valid.  During installation, maintenance and repair work, ...

Warning and safety instructions 13  A sink in the adjacent cabinet of the dishwasher must be carefully sealed. Regularly check for leaks to avoid damage to the dish-washer.  The dishwasher must only be built into a tall unit if additional safety precautions are taken. In order to safely install th...

Warning and safety instructions 15  Please observe the information given in the “Technical data” chapter regarding the capacity of the dishwasher. Accessories and spare parts  Only use original Miele accessories. If other parts are used, war- ranty, performance and, if applicable, product liabilit...

Notes on the operating instructions 16 These operating instructions apply toseveral different dishwasher models ofdifferent heights. The different dishwasher models will benamed as follows: normal = dishwasher measuring80.5 cm high (built-in appliance) or84.5 cm high (freestanding appliance) XXL = d...

Scope 17 The appliance is supplied with: - Dishwasher - Operating instructions for operating the dishwasher - Installation sheet for installing the dishwasher - Other installation accessories for in- stalling the dishwasher (see installa-tion sheet) - Funnel for filling the dishwasher salt - Additio...

Guide to the appliance 18 Appliance overview a Door locking pins b Top spray arm c 3D MultiFlex cutlery tray (dependingon model) d Upper basket (depending on model) e Middle spray arm f Aeration valve g Bottom spray arm h Filter combination i Salt reservoir j Data plate k Rinse aid reservoir l Deter...

Guide to the appliance 19 Control panel a Optical in-operation indicator lightFor indicating an ongoing wash pro-gramme when the door is closed. b    On/Off  sensor control For switching the dishwasher on andoff. c    Remote start  sensor control For activating/deactivating the Re-mote start optio...

Guide to the appliance 20 Display functions The display is used to select or set thefollowing: - The programme - Options - The timer - The Settings The display can show the following: - The programme name - The programme stage - The estimated time left for the pro- gramme to run - The energy and wat...

Guide to the appliance 21 Examples of how to operate the ap-pliance Main menu Use the   Back sensor control to switch from the Programme menu tothe main menu.   Settings Programmes In the main menu, you can choose theProgramme menu to select pro-grammes as well as the Settings menu. You can alter...

Before using for the first time 23 Every dishwasher is tested at the fact-ory. There will be residual water in theappliance from this test. It is not an in-dication that the dishwasher has beenused previously. Opening the door In some programmes, the door auto-matically opens slightly to assist thed...

Before using for the first time 24 Door-opening mechanism If the door will not open when knockedor if there is a power failure, the doorcan be opened manually with the door-opening mechanism supplied with thedishwasher.  Push the door-opening mechanisminto the gap between the dishwasherfront and th...

Before using for the first time 25 Miele@home Your dishwasher is equipped with anintegrated WiFi module. In order to use it you will need: - A WiFi network - The Miele app - A Miele user account The user ac- count can be created via the Mieleapp. The Miele app will guide you as youconnect your dishw...

Before using for the first time 26 Basic settings Switching on the dishwasher  Open the door.  Switch the dishwasher on using the   sensor control. The welcome screen will appear whenthe dishwasher is switched on and thewelcome melody will sound. For further information about the dis-play functio...

Before using for the first time 27 Setting the time of day The time of day is updated automatic-ally if a connection is established withthe WiFi network. The display will then change to thescreen for setting the clock format andthe time of day. The current time of day must be set be-fore you can use...

Before using for the first time 28 Activating AutoDos The display changes to the settingsscreen for AutoDos (see the “Detergent”chapter, “Automatic dispensing/Auto-Dos” section). Even if you do not wish to use Auto-Dos, you must remove the transportlocking device from the PowerDiskcompartment before...

Before using for the first time 29 Dishwasher salt In order to achieve good cleaning res-ults, the dishwasher needs to operatewith soft water. Hard water results inthe build-up of calcium deposits oncrockery and on the wash cabinet walls. Mains water with a water hardness levelhigher than 0.9 mmol/l...

Before using for the first time 30 Filling the salt reservoir Before filling the salt reservoir for thefirst time, you must fill it with approx.2 l of water to enable the salt to dis-solve. Once the dishwasher has been usedonce, there is always sufficient waterin the salt reservoir.  Remove the low...

Before using for the first time 31 Refilling the salt  When    Add salt and run the “QuickPowerWash” programme with the“Express” option without a load appears in the display, wait until the end of theprogramme and then refill the saltreservoir.  Confirm with OK . The salt refill indicator will go...

Before using for the first time 32 Rinse aid Rinse aid is necessary to ensure thatwater does not cling and leave markson crockery during the drying phase,and helps crockery dry faster after ithas been washed. Rinse aid is poured into the containerand the amount set is dispensed auto-matically.  Was...

Before using for the first time 33 Adding rinse aid  Press the yellow button   on the lid of the rinse aid reservoir. The lid will spring open.  Fill with rinse aid until the filling levelindicator (arrow) changes to a darkcolour while the door is horizontallyopen. The rinse aid reservoir holds a...

Settings 34 You can alter the dishwasher’s con-trols to suit changing requirements byadjusting the settings. The settings can be altered at anytime. Opening the settings menu  Switch the dishwasher on using the   sensor control. The Programmes menu will appear inthe display. For further informatio...

Settings 35 Language   The display can be set to appear in oneof several different languages. You can change the language used inthe display and also the country via the Language   sub-menu. The flag after the word  Language  serves as a guide if a language thatyou do not understand has been set....

Settings 36 Water hardness Your dishwasher is fitted with a watersoftener. - You should programme the dish- washer to the correct water hardnessfor your area. - Your local water authority will be able to advise you of the water hardnesslevel in your area. - Where the water hardness fluctuates e.g. b...

Settings 40 Reset network configuration? This menu option will only be displayedif you have connected your dishwasherto your WiFi network. You can use this menu option to resetall WiFi module settings to the factorydefault settings. The network configuration should be re-set whenever a dishwasher is...

Settings 41 Remote Update The RemoteUpdate menu option isonly displayed and can only be selec-ted if the requirements for usingMiele@home have been met (see “Be-fore using for the first time” chapter,“Miele@home” section). The RemoteUpdate function is used forupdating the software in your dish-washe...

Settings 42 SmartStart This menu option will only be dis-played if you have connected yourdishwasher to your WiFi network (see“Settings” chapter, “Miele@home”section) The SmartStart  function is used for start- ing your dishwasher automatically at atime when your energy costs are mosteconomical. To ...

Settings 43 Setting the energy tariff times Before you can use the EcoStart  option, you must set at least one energy tarifftime.  Select an energy tariff time to setfrom T1 to T3. The start of the energy tariff time selec-ted will be displayed.  Set the hours and minutes for thestart time.  Sele...

Settings 44 Deleting the energy tariff times You can delete the settings for an en-ergy tariff time and in doing so deactiv-ate the EcoStart  option for this time zone.  Select an energy tariff time to deletefrom T1 to T3.  Select    Delete .  Confirm the query with Yes . The settings for the en...

Settings 45 Temperature The temperature can be displayed in°C/Celsius or °F/Fahrenheit. The factory default setting is °C/Celsius. Display brightness You can set the display brightness toone of seven different levels on the barchart. Volume A buzzer sequence will sound at theend of a programme or if...

Settings 46 Refill reminders If you only ever use combination deter-gent products or automatic dispensingusing Miele PowerDisks (if available),you can switch off the refill remindersfor dishwasher salt and rinse aid if youwish. Please make sure that if you stop us-ing combination detergents, you ref...

Settings 47 BrilliantLight This dishwasher is equipped with washcabinet interior lighting.When the door is open, the lightingswitches off automatically after 15minutes. You can also switch off the wash cab-inet interior lighting permanently. Hygiene cycle If you mainly use low temperature pro-gramme...

Settings 48 Software version You can call up the electronic softwareversion of your dishwasher for technicalsupport purposes. Legal information You can view legal information aboutthe open source licences for your dish-washer. Copyrights and licences foroperator and control software Miele uses their...

Settings 49 Copyrights and licences for thecommunication module For the purpose of operating and con-trolling the communication module,Miele uses proprietary or third-partysoftware that is not covered by opensource licensing terms. These items ofsoftware/software components are pro-tected by copyrig...

Caring for the environment 50 Economical dishwashing This dishwasher is exceptionally eco-nomical in its use of water and electri-city. You can make the most of your appli-ance by following these tips: - Washing in a dishwasher generally uses less water and energy thanwashing by hand. - There is no ...

Caring for the environment 51 EcoFeedback consumption in-dicator You can view information about the en-ergy and water consumption of yourdishwasher (see “Settings” chapter,“Consumption” section). The following information will appear inthe display: - Estimated energy and water con- sumption before t...

Caring for the environment 52 Heat accumulator This dishwasher is equipped with a heataccumulator, in which fresh water forthe programme is pre-heated andstored in order to save energy. The heataccumulator is refilled with fresh watertowards the end of each rinse cycle.The water is held here ready f...

Loading the dishwasher 53 General information Remove coarse food residues fromcrockery. There is no need to pre-rinse items un-der running water.  Damage can be caused by ash, sand, wax, lubricating grease orpaint.These substances will contaminatethe dishwasher and can then nolonger be removed.Do n...

Loading the dishwasher 54 Items not suitable for dishwashers: - Wooden cutlery and crockery or items with wooden parts: these maydiscolour and fade. The glue used inthese items is not dishwasher-proofand wooden handles may comeloose after being washed in a dish-washer. - Craft items, antiques, valua...

Loading the dishwasher 55 Upper basket See the “Loading the dishwasher”chapter, “Loading examples” sectionfor examples of how to load crockeryand cutlery. Loading the upper basket  Damage due to leaking water. If you run the dishwasher without theupper basket, water can leak out ofthe dishwasher.On...

Loading the dishwasher 56 Adjusting the FlexCare cup rack You can set the height and depth of thecup rack at two different levels. so thatit can accommodate larger cups and sothat taller crockery can be placed un-derneath it.  Pull the cup rack upwards and click itinto the desired position (see arr...

Loading the dishwasher 57 Lower the spikes On both right-hand rows of spikes, youcan lower every other spike to make iteasier to arrange larger crockery, likecereal bowls.  Press the yellow lever downwards  , and then lower the dark grey spikes  .  Place the bowls vertically in the rowof spikes.

Loading the dishwasher 58 Adjusting the upper basket In order to gain more space for tallerpieces of crockery in the lower basketor upper basket, the upper basket canbe adjusted on 3 levels with 2 cmbetween each level. The upper basket can also be set at anangle so that water can run off freelyfrom ...

Loading the dishwasher 59 Lower basket See the “Loading the dishwasher”chapter, “Loading examples” sectionfor examples of how to load crockeryand cutlery. Loading the lower basket  Place larger and heavier items suchas plates, serving platters, sauce-pans, bowls etc., in the lower basket. Glasses, ...

Loading the dishwasher 60 Loading the FlexCare glass holderwith MultiClips The silicone elements in the glassholder provide a stable and secure holdfor delicate stemware.  Stemware such as wine glasses,champagne flutes and beer glassescan be leaned against the glass rackor suspended from it.  The ...

Loading the dishwasher 61 Loading the glass rail This rail is designed to hold glasseswith long stems securely.  Lower the glass rail and lean theglasses against it. Lower the bottle holder The bottle holder can be used to keepnarrow items such as milk and babybottles secure during a programme.  R...

Loading the dishwasher 62 Cutlery tray See the “Loading the dishwasher”chapter, “Loading examples” sectionfor examples of how to load crockeryand cutlery.  Load the cutlery into the 3D MultiFlextray. Loading the 3D MultiFlex tray To make unloading easier, cutleryshould be grouped in zones, one fork...

Loading the dishwasher 63 Loading examples Dishwashers with cutlery tray Upper basket Lower basket

Detergent 65 Active ingredients  Damage caused by using unsuit- able detergents.Detergents that are not suitable fordomestic dishwashers can causedamage to the dishwasher or to theload.Only use detergents formulated fordomestic dishwashers. Modern detergents contain various act-ive ingredients, the...

Detergent 66  Risk of chemical burns from de- tergent.Dishwasher detergents can causeburning on the skin and in the eyes,nose, mouth and throat.Avoid contact with detergents. Do not inhale powder detergents. Donot swallow dishwasher detergents.Seek medical attention immediately ifdetergent has been...

Detergent 67 Automatic dispensing/AutoDos Before you can use AutoDos, you mustinsert a PowerDisk containing powderdetergent into the PowerDisk compart-ment. One PowerDisk contains enough deter-gent for approx. 20 cycles, dependingon the chosen programme. PowerDisks are available to order dir-ectly f...

Detergent 68 Inserting a PowerDisk Switch on the dishwasher before youreplace the PowerDisk so that thedishwasher recognises it. When the message  PowerDisk almost empty appears, the reservoir contains sufficient detergent for two to three pro-grammes only. Only replace the PowerDisk when themessage...

Detergent 69  Close the AutoDos lid and turn it untilthe lid handle is directly below the   symbol. If the PowerDisk is not in the correctstarting position, it will be rotated auto-matically and the AutoDos  function will be activated. Wait until this procedure ends beforeyou start a programme. Th...

Detergent 70 Manual detergent dispensing Detergent must be manually dispensedif you have deactivated automatic dis-pensing in a programme's Extras menu. Detergent dispensing The detergent compartment holds amaximum of 50 ml. There are marks in the detergent com-partment to aid with dispensing: 20, 3...

Operation 72 Switching on the dishwasher  Open the stopcock, if it is closed.  Open the door.  Make sure the spray arms can rotatefreely.  Touch the    sensor control. If the dishwasher has been switchedoff for longer than 1 minute, you willneed to hold the   sensor control for a bit longer (w...

Operation 73 Display of programme duration The estimated duration of the selectedprogramme appears on the display be-fore the programme begins. If the dooris opened during the programme, thetime left until the end of the programmeis displayed. The displayed duration may vary for thesame programme. I...

Operation 74 End of programme At the end of a programme, the opticalin-operation indicator light will flashslowly with the door shut. The buzzermight also sound. The optical in-operation indicator lightwill go out 10 minutes after the end ofthe programme if the door is closed. The programme has ende...

Operation 75 Switching off the dishwasher  Open the door.  The dishwasher can be switched offat any time using the   sensor con- trol.  Confirm the query Switch appliance off? with Yes . Switching the dishwasher off during aprogramme stops the programme. You can also do this to stop an ongoingti...

Operation 76 Interrupting a programme A programme will be interrupted assoon as the door is opened. If the door is closed again, the pro-gramme will continue from the point itwas at before the door was opened.  Risk of scalding due to hot wa- ter.During operation, water in the dish-washer may be ve...

Options 77 Timer   The timer   gives you several options for starting a programme at a later time.You can set the start time or the finishtime of a programme. You can also usethe EcoStart or SmartStart  functions to benefit from cheaper energy tariffs atnight. With manual detergent dispensingthe d...

Options 78 Setting “Start at” With the Start at  function, you set the exact time you want the programme tostart at.  Set the hours with the   sensor controls.  Touch the minute number block.  Use the   sensor controls to enter the minutes and confirm your entryby touching OK . The saved star...

Options 79 Setting EcoStart You can use the EcoStart  function to be- nefit from cheaper energy tariffs atnight. Before you can use this option,you need to set up to three electricaltariff time zones (see “Settings”chapter, “EcoStart” section). Then set the latest time by which theselected programme...

Options 80 Set the time by which the selected pro-gramme has to be finished by.  Set the hours with the   sensor controls.  Touch the minute number block.  Use the   sensor controls to enter the minutes and confirm your entryby touching OK . The message  Waiting for SmartStart will appear in ...

Options 81 Activating Remote start   You can start your dishwasher remotelyusing the Miele app. To do this, you firstneed to install the app on your mobiledevice, connect the dishwasher to yourWiFi network (see “Settings” chapter,“Miele@home” section) and, if applic-able, activate the Remote contro...

Guide for selecting a programme 82 Temperature-sensitive dishes, glasses and plastics Pots, pans, everyday crockery and cutlery No crockery Lightly dried-on normal food deposits Stubborn dried-on, burnt-on food deposits containing starch or protein 1 Residual salt after refilling the salt container ...

Guide for selecting a programme 83 Gentle 45 °C  Auto 45–65 °C  QuickPowerWash 65 °C  ExtraQuiet 55 °C  QuickPowerWash 65 °C  + Express  Programme 2 Hygiene 70 °C  2 The programmes can be combined with the “Express”, “IntenseZone”, “Extra clean” or “Extra dry” Extras (see “Extras”). You can a...

Programme overview 84 Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying/ AutoOpen °C °C ECO 1 - 43  42  /  Auto 45–65 °C Variable programme sequence, sensor-controlled adjustment according to load size and level of soiling As required 45–65  55–70  /  Gentle 45 °...

Programme overview 85 Consumption 2 Electrical energy Water Time Cold water Hot water Litres Cold water Hot water 15 °C 60 °C 15 °C 60 °C kWh kWh h:min h:min 0.54 0.29 8.4 3:50 3:40 0.65–1.00 3,4 0.55–0.65 3,4 6.0–13.0 3,4 2:02–3:06 1:59–2:49 0.85 0.40 13.5 2:42 2:23 0.90 0.70 9.5 4:04 3:50 1.10 0.7...

Programme overview 86 Further programmes SolarSave Programme operating without heatingwhen the dishwasher is connected to ahot water supply of at least 45 °C (see“Installation – Water inlet”). This pro-gramme is suitable for cleaning a mixedload with normal household foodresidues that have slightly ...

Extras 87 Selecting extras You can use extras to adjust the pro-grammes. To do this, you can select or deselectthe extras in the Extras menu of a se-lected programme before starting it.  Open the door.  Switch the dishwasher on using the   sensor control.  Select a different programme as re-quir...

Extras 88 IntenseZone The IntenseZone  extra increases clean- ing performance in the lower basket. Energy consumption increases due tothe extended wash duration in the lowerbasket and increased temperature. Express The Express  extra reduces the pro- gramme duration. In order to achieve optimum clea...

Cleaning and care 89 Check the condition of your dish-washer regularly (approx. every 4–6months). In this way, faults and prob-lems can be avoided.  Damage due to unsuitable clean- ing agents.All surfaces are susceptible toscratching. Contact with unsuitablecleaning agents can alter or discol-our t...

Cleaning and care 90 Hygiene cycle If you mainly use low temperature pro-grammes, there is a risk of bacteria andunpleasant odours building up in thewash cabinet. If you repeatedly use lowtemperature programmes, you shouldregularly run a high temperature pro-gramme. This is to prevent the build-upof...

Cleaning and care 91 Cleaning the appliance front  Damage due to soiling. Soiling that is left too long might be-come impossible to remove andcould cause the external surfaces toalter or discolour.It is therefore best to remove anysoiling immediately.  Clean the appliance front with a cleansoft sp...

Cleaning and care 92 Cleaning the AutoDos If the Clean AutoDos message is dis- played, check that the fill channel isclean, and clean it if necessary, e.g.powder residues. This helps keep theAutoDos working properly. In order to ensure that the AutoDosworks at its best, check it each timeyou replace...

Cleaning and care 94 Cleaning the spray arms Particles of food can get stuck in thespray arm nozzles and bearings. Thespray arms should therefore be inspec-ted regularly (approx. every 2–4 months). Never run a wash programmewithout using the spray arms.  Damage due to soiling entering the circulati...

Cleaning and care 95 Removing the top spray arm  Push the upper spray arm upwards   to engage the inner ratchet. Then un-screw the spray arm by rotating thescrew thread anti-clockwise   . Removing the middle spray arm  Rotate the screw thread of the middlespray arm clockwise   and remove the sp...

Cleaning and care 96 Inserting the upper spray arm  Refit the upper spray arm and tightenit by hand. Inserting the middle spray arm  Replace the middle spray arm andturn the screw thread anticlockwiseuntil it engages. Make sure that therecesses in the lock line up. Inserting the lower spray arm  ...

Cleaning and care 97 Checking the filters in thewash cabinet The filter combination in the base of thewash cabinet retains coarse soilingfrom the suds solution. This preventssoiling getting into the circulation sys-tem and re-entering the wash cabinetthrough the spray arms.  Damage due to soiling e...

Cleaning and care 99 Cleaning the water inlet filter A filter is incorporated in the screwthread to protect the water inlet valve. Ifthe filter is soiled, insufficient waterflows into the wash cabinet.  Risk of electric shock from mains voltage.The plastic housing of the water con-nection contains ...

Cleaning and care 100 Cleaning the drain pump If water remains in the wash cabinetafter the end of a programme, the waterhas not been pumped away. The drainpump may be blocked by foreign ob-jects. These are easy to remove.  Disconnect the dishwasher from themains. To do this, turn off the dishwashe...

Cleaning and care 101 The drain pump (see arrow) is under-neath the cover.  Risk of injury from glass splin- ters.It is especially difficult to see glasssplinters in the drain pump.Take care when cleaning the drainpump.  Carefully remove all foreign objectsfrom the drain pump. Check the drainpump ...

Problem solving guide 102 Many malfunctions and faults that can occur in daily operation can be easilyremedied. Time and money will be saved because a service call will not beneeded. The following guide may help you to find the reason for a malfunction or a fault,and to correct it. This section only...

Problem solving guide 104 Fault messages Problem Cause and remedy The optical in-operationindicator light is flash-ing quickly. The alarm tone issounding. One of the followingfaults appears in thedisplay: Before rectifying the problem:  Switch the dishwasher off.    Fault F: Technical fault. Switc...

Problem solving guide 105 Door release Problem Cause and remedy The optical in-operationindicator light is flash-ing quickly. The alarm tone issounding. The following fault is in-dicated via the display: Before rectifying the problem:  Switch the dishwasher off.    Door opening fault. Switch the a...

Problem solving guide 106 Water inlet fault Problem Cause and remedy The optical in-operationindicator light is flash-ing quickly. The alarm tone issounding. One of the followingmessages appears inthe display:    Please open the stop- cock The stopcock is closed.  Open the stopcock fully.    Insu...

Problem solving guide 107 Water drainage fault Problem Cause and remedy The optical in-operationindicator light is flash-ing quickly. The alarm tone issounding. The message    Water was not pumped away, see operating instruc-tions appears in the dis- play. Before rectifying the problem:  Switch th...

Problem solving guide 108 Fault in the AutoDos (automatic dispensing) Problem Cause and remedy The message  Insert PowerDisk or deactiv-ate AutoDos with OK ap- pears in the display. The AutoDos  function is active but no PowerDisk has been inserted.  Insert a PowerDisk (see the “Detergent” chapter,...

Problem solving guide 110 Spray arm fault Problem Cause and remedy During the programmeand at the end of theprogramme, the displayshows the followingmessage: Check spray arms The dishwasher doesnot switch off at the endof the programme. The wash items may notbe clean because nodetergent was dis-pens...

Problem solving guide 111 General problems with the dishwasher Problem Cause and remedy The door will not openwhen knocked. The Knock2open function has been permanently dis- abled.  Switch the door opening function on again (see“Settings” chapter, ”Knock2open” section). If the door still will not o...

Problem solving guide 113 Noises Problem Cause and remedy Knocking noise in thewash cabinet A spray arm is knocking against a wash item.  Carefully open the door and rearrange the washitems that are obstructing the spray arm. Rattling noise in thewash cabinet Wash items are insecure in the wash cab...

Problem solving guide 114 Unsatisfactory washing result Problem Cause and remedy The crockery is notclean. The crockery was not loaded correctly.  See notes in the “Loading the dishwasher” for ex-amples on how to load crockery and cutlery. The programme was not powerful enough.  Select a more powe...

Service 118 Contact in the event of a fault In the event of any faults which youcannot remedy yourself, please contactyour Miele dealer or the Miele CustomerService Department. You can book a Miele Customer Ser-vice Department call-out online atwww.miele.com/service. Contact information for the Miel...

Service 119 Note for test institutes All relevant information for comparisontesting is provided in the “Comparison tests” booklet. You can download this booklet from theMiele website. You will find the bookletunder “Downloads” on the page for therelevant dishwasher model.

Optional accessories 120 Dishwasher detergent, rinse aid andcleaning and care products are avail-able for this dishwasher, as are optionalaccessories. All the products have been designed forMiele appliances. These and many other products can beordered from the Miele webshop, theMiele Customer Servic...

Optional accessories 121 Appliance care Miele cleaning and care productsprovide optimum care for your Mieledishwasher. Dishwasher cleaner - For use with the Maintenance  pro- gramme without detergent dispens-ing - Cleans the dishwasher effectively and thoroughly - Removes grease, bacteria, and asso-...

Installation *INSTALLATION* 122 The Miele Waterproof system Provided that your dishwasher hasbeen installed correctly, the Miele Wa-terproof system will protect you fromwater damage throughout its lifetime. Water inlet  Health risk due to wash water. Water in the dishwasher is not drink-ing water.D...

Installation *INSTALLATION* 123  Risk of damage from leaking wa- ter.The connection point is subject tomains water pressure. Water leakingfrom it can cause damage.You should therefore open the stop-cock slowly and check for leaks.Correct the position of the seal andscrew thread if appropriate. Regu...

Installation *INSTALLATION* 124 Water drainage The dishwasher’s drainage system is fit-ted with a non-return valve, which pre-vents dirty water from flowing back intothe appliance via the drain hose. The dishwasher is supplied with ap-prox. 1.5 m of flexible drain hose withan internal diameter of 22...

Installation *INSTALLATION* 125 Venting the water drain If the on-site drainage connection issituated lower than the guide path forthe lower basket rollers in the opendoor, the drainage system must be ven-ted. Otherwise, a siphoning effect dur-ing a programme can cause the appli-ance to empty itself...

Installation *INSTALLATION* 126 Electrical connection The dishwasher is “connector-ready” asstandard for connection to an earthedsocket. The socket must be easily accessibleafter the dishwasher has been installed.If that is not possible, ensure that asuitable means of disconnection isprovided on the...

Technical data 127 Technical data Dishwasher model Normal XXL Height 80.5 cm(adjustable by+6.5 cm) 84.5 cm(adjustable by+6.5 cm) Height of building-in niche Min. 80.5 cm (+6.5 cm) Min. 84.5 cm (+6.5 cm) Width 59.8 cm 59.8 cm Width of building-in niche 60 cm 60 cm Depth 57 cm 57 cm Weight Max. 47 kg ...

Technical data 128 EU Conformity declaration Miele hereby declares that this dishwasher complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of thefollowing internet addresses: - Products, Download from www.miele.ie - For service, informatio...

United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TWTel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: [email protected] Australia Miele Australia Pty. Ltd.ACN 005 635 398ABN 96 005 635 398Level 4, 141 Camberwell RoadHawthorn East, VIC 3123Tel: 1300 464 353Int...