Miele 11503570 - Manuals

IMPORTANT SAFETY INSTRUCTIONS 6 Appropriate use  This appliance is intended for use in domestic households and similar residential environments such as– staff kitchen areas in shops, offices and other working environ-ments– farm houses and by clients in hotels, motels and other residentialtype envi...

IMPORTANT SAFETY INSTRUCTIONS 7 Safety with children  To reduce the risk of injury, do not allow children to play in, on or near the appliance.  The door hinges can cause injury. Keep children well away at all times.  Ensure that any packing material is disposed of safely and kept out of the reac...

IMPORTANT SAFETY INSTRUCTIONS 10  The ice cube maker must only be connected to a cold water line.  DANGER of injury! Never tamper with the movable components on the ice cube maker or the element on the ice cube maker. Correct use  The refrigeration appliance is designed for use within a specific ...

IMPORTANT SAFETY INSTRUCTIONS 11  Risk of injury. Never handle frozen food or the metal parts of the appliance with wet hands. Your hands may freeze to the frozen foodor to the metal.  Risk of injury. Do not take ice cubes out with your bare hands and never place ice cubes or ice pops in your mout...

IMPORTANT SAFETY INSTRUCTIONS 12 Cleaning and maintenance  Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time.  Never use a steam cleaner to clean the appliance. The steam can reach the electrical components and cause a shortcircuit.  Sharp edged or ...

IMPORTANT SAFETY INSTRUCTIONS 13 Transport  To avoid damage to the appliance, always transport it upright and in its packaging.  Risk of injury and damage. The refrigeration appliance is very heavy and must be transported by two people.

IMPORTANT SAFETY INSTRUCTIONS 14 Disposal of your old appliance  Children could become trapped in the machine and could suffo- cate. - Remove the machine doors. - Remove the drawers. - Leave the adjustable shelves in the machine so children cannot climb inside.  DANGER of electric shock! - Cut the...

Caring for the environment 15 Disposal of packaging material The packaging is designed to protectthe appliance from damage duringtransportation. The packaging materialsused are selected from materials whichare environmentally friendly for disposaland should be recycled. Ensure that any plastic wrapp...

Installation *INSTALLATION* 16 Installation location This appliance should be installed in adry, well-ventilated room. When deciding where to install your re-frigeration appliance, please bear inmind that it will use more energy if in-stalled near to a heater, a range, or an-other appliance that giv...

Installation *INSTALLATION* 17  Risk of damage due to high hu- midity.In environments with high humidity,condensation can build up on exter-nal refrigeration appliance panels,which can cause corrosion.Install the refrigeration appliance in adry and/or air-conditioned room withsufficient ventilation...

Installation *INSTALLATION* 18 Load-bearing capacity of the nichefloor To ensure the safe installation of the re-frigeration appliance and to guaranteeits correct functioning, the floor of theniche where the appliance is to be in-stalled must be smooth and even. It must be made from strong, rigid ma...

Installation *INSTALLATION* 19 Side-by-side This appliance can be installed side-by-side with another refrigeration appli-ance. The following overview will showyou which side-by-side options youhave with your appliance: A side-by-side merging kit and a topframe (KTF) are required for this. Bothare a...

Installation *INSTALLATION* 21 Installation dimensions Position of the electrical and plumbed water connections - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. - The 1/4" (6 mm) plumbed water connection should not be positioned higher than 2" (...

Installation *INSTALLATION* 24 Dimensions when the appliance door is open (opening angle 115°) 3/8" (10 mm) A D B C A B C D F 2472 SF 20 11/16" (525 mm) Cabinet front Door handle 9 5/16" (237 mm) F 2672 SF 26 5/8" (677 mm) Cabinet front Door handle 11 5/8" (296 mm) The opening an...

Installation *INSTALLATION* 25 Building in the appliance Before starting... It is essential to read these installa-tion instructions carefully beforestarting to install the appliance.The appliance should be installed bya suitably qualified tradesman in ac-cordance with these installation in-structio...

Installation *INSTALLATION* 26 Aligning the installation niche The building-in niche must be carefullyaligned using a spirit level before the re-frigeration appliance is installed. Theniche corners must be at 90° angles toeach other, otherwise the cabinet frontwill not sit straight on all 4 corners ...

Installation *INSTALLATION* 27 Before installation  Before installation, remove any ac-cessories from the back of the appli-ance.  Check the refrigeration appliance fordamage during transportation. Do not install a damaged appliance.  Check that all parts at the back of theappliance are unhindere...

Installation *INSTALLATION* 28 Preparing the installation niche  Risk of damage and injury due to the refrigeration appliance tippingover.This refrigeration appliance is veryheavy and can tip forwards when thedoors are open.The installation niche must be se-cured to the wall behind it and/orabove i...

Installation *INSTALLATION* 30 2 Securing with a wooden wedge  Secure the installation niche to thewall behind it and/or above it as re-quired using the anti-tip brackets   .  Now prepare the plumbed water con-nection for the refrigeration appliance(see “Plumbed water connection”). Pushing the ap...

Installation *INSTALLATION* 32 Aligning the refrigeration appliance  Align the appliance with neighboringcabinet fronts as described below. The adjustable feet at the front andback of the appliance can all be ad-justed from the front of the appliance.  Risk of damage due to incorrect feet adjustme...

Installation *INSTALLATION* 33  Adjust the rear feet with a ratchet (at-tachment: socket, 8 mm) or a TX 20screwdriver   .  Adjust the front feet with a ratchet (at-tachment: socket, 8 mm) or a TX 20screwdriver   . Tip: Proceed carefully when adjusting the feet, alternating between the leftand ri...

Installation *INSTALLATION* 34  Risk of damage if the feet are adjusted too much.The rear adjustable feet can be dam-aged.Unscrew the feet only until the marking on the toe-kick is aligned toa maximum of 2 7/16" (62 mm) (max.niche height of 85 3/16" (2,164 mm)).  Use a level to check the a...

Installation *INSTALLATION* 35 Securing the toe-kick board andcover  Remove the film from the adhesivestrips on the toe-kick cover pro-vided   .  Secure the toe-kick cover   to the toe-kick board   .  Click the toe-kick board   onto the bottom of the appliance toe-kick. Aligning the appliance...

Installation *INSTALLATION* 38  Place the covers provided   on the fixing brackets.  Remove the spacers   from the ap- pliance door. Aligning the Ice/Water dispenser If necessary, the depth of the Ice/Waterdispenser can be aligned to line up withthe cabinet front. Unplug the appliance or switch ...

Installation *INSTALLATION* 40 1/16" (1.8 mm) The protrusion from the inner to theouter frame should be 1/16" (1.8 mm).  Align the frame perfectly with the Ice/Water dispenser.  Align the frame centrally.  Finally, use a wrench to tighten thenuts by turning them clockwise.

Installation *INSTALLATION* 41  Remove the frame again.  Attach the adhesive strips providedto the 4 sides of the frame.  Remove the film from each of the ad-hesive strips.  Align the frame again perfectly withthe Ice/Water dispenser.

Installation *INSTALLATION* 43  Then remove the film from both sidesof the Ice/Water dispenser. Water connection Information on the fresh water con-nection  Risk of injury and appliance damage if appliance is not con-nected properly.Failing to connect the applianceproperly can result in personal i...

Installation *INSTALLATION* 44 The appliance is only suitable forconnection to a cold water line,which - is directly connected to the water supply in order to ensure that water iscirculated in the cold water line. Avoid connection to a water supplyin which the water might stagnate.This can affect th...

Installation *INSTALLATION* 46 Electrical connection  Risk of electric shock! The appliance must only be switchedon when it has been installed in ac-cordance with the installation in-structions.Ground the appliance.The appliance must not be groundedvia a gas pipe.If in doubt, have a suitably qualif...

Installation *INSTALLATION* 47 If the outlet is no longer accessible afterinstallation, an additional means of dis-connection must be provided for allpoles. Suitable means of disconnectioninclude switches with an all-pole dis-connect device with a contact openingof at least 1/8" (3 mm). These ca...

Saving energy 48 Normal energy consumption Increased energy consumption Installation /Maintenance In a well-ventilated room. In an enclosed, poorly venti-lated room. Protected from direct sun-light. In direct sunlight. Away from heat sources (ra-diator, range/oven). Near a heat source (radiator,oven...

Saving energy 49 Normal energy consumption Increased energy consumption Use Drawers and shelves ar-ranged as they were whenthe appliance was delivered. Only open the door whennecessary and for as short atime as possible. Store foodin an organized way. Frequent opening of thedoor for long periods wil...

Guide to the appliance 50 a Display b On/Off switch c Ice maker d Ice-cube container e Interior lighting f Shelves g Ice/Water dispenser (“Ice/Water dispenser”) in the door h Freezer baskets i Automatic door opening (Push2open/Pull2open) j Water filter k Control panel for Ice/Water dispenser l Ice/W...

Guide to the appliance 51 Main screen °F 0      1 2 3 4 5 a SuperFrost display(only visible when the SuperFrost function has been switched on) b Temperature display (target temperature) c Sensor control   for setting the temperature d Display for Miele@home connection status (only visible when...

Guide to the appliance 52 Control panel for Ice/Water dispenser a Sensor control for chilled water b Sensor control for ice cubes c Sensor control for crushed ice d Switch system lock on/off (see “Ice/Water dispenser” –“System lock”)

Guide to the appliance 53 Settings mode   In Settings mode, you can select the following appliance functions and alter theirsettings to some extent: Symbol Function  Language Set  Display Brightness Adjust (darker to brighter) Color Scheme Set (dark or bright)  /  Buzzer Tones Adjust the volume...

Guide to the appliance 54  Factory Default Reset to default settings (see “Selecting additional settings”)  Dispenser Lighting Select the lighting settings for the Ice/Water dis-penser(see “Selecting additional settings”)  Dispenser Unit Switch the Ice/Water dispenser on or off (see “Operating th...

Accessories 55 Accessories supplied Appliance plug Water filter (IntensiveClear 2.0 char-coal filter) The IntensiveClear 2.0 charcoal filter,which is already installed in the refriger-ation appliance, improves the taste andsmell of the ice cubes by removingchlorine and other substances fromsupply wa...

Before first use 56 Before first use Allow the appliance to stand for ap-prox. 1 hour prior to connecting it tothe power supply.This will help prevent any malfunc-tions. Packaging material  Remove all packaging material fromthe inside of the appliance. Leftover tape residue.Always remove all packag...

Before first use 57 Miele@home Your refrigeration appliance isequipped with an integrated WiFimodule. Networking is deactivated at the fac-tory. To use this feature, you will need: - a WiFi network - the Miele app - a Miele user account You can create a user account via the Miele app. The Miele app ...

Before first use 58 Operating the refrigeration ap-pliance The touch display can be scratchedby pointed or sharp objects, e.g.,pens.Only touch the display with your fin-gers. If your fingers are cold, the touchdisplay may not react. °F 0      The sensor controls underneath thetemperature displa...

Before first use 59 Starting up for the first time  Open the appliance door.  Turn the refrigeration appliance on bypressing the On/Off switch. The On/Off switch is located belowthe display. The refrigeration appliance will start tocool and the interior lighting will comeon when the appliance door...

Switching on and off 60 Switching on the appliance  Open the appliance door.  Turn the refrigeration appliance on bypressing the On/Off switch. The refrigeration appliance will start tocool and the interior lighting will comeon when the appliance door is opened. Miele will appear, followed by the ...

Switching on and off 61 Switching off for longer peri-ods of time If the appliance is not going to be usedfor a longer period of time:  Turn the appliance off.  Unplug the appliance or switch offthe breaker.  Risk of damage due to frozen water intake pipe.If the water intake is blocked whilethe i...

Selecting additional settings 62 In settings mode   , certain settings can be adjusted and functions selected,allowing you to adjust the machine tosuit your requirements. The following section only describe thefunctions in settings mode  that re- quire further explanation. The door alarm and other...

Selecting additional settings 63 Switching Eco Mode    on or off Eco Mode is useful when going on vaca- tion, for example, if you do not wish toswitch off the appliance completely ordo not need a high degree of cooling.Energy consumption in Eco Mode is lower than in normal operation. The freezer zo...

Selecting additional settings 64 Performing a Self Test    Perform a Self Test if you are concerned that your refrigeration appliance is notworking properly and want to check if itis suffering from any problems.  In Settings mode   , use the   and   sensor controls to select Self Test and selec...

Selecting additional settings 65 Switching on the Door Assis- tant    You can choose between the two DoorAssistants Push2Open and Pull2Open . The default Door Assistant is Push2Open . The Push2Open Door Assistant is suit- able for cabinet fronts without handles.The door will then open automatically...

Selecting additional settings 66 – Adjusting the duration of the Auto-Close function You can also adjust the duration forhow long the appliance door will remainopen until it closes automatically.  In Settings mode   , use the   and   sensor controls to select Door As- sistant and select OK to co...

Selecting additional settings 67 Switching off the Door Assis- tant     In Settings mode   , use the   and   sensor controls to select Door As- sistant and select OK to confirm your selection.  Use the   and   sensor controls to select Mode and select OK to confirm your selection.  Use the ...

Selecting additional settings 68 Activating Miele@home If you have already activatedMiele@home and then disconnectedthe connection, you will need to reac-tivate the connection.  In Settings mode   , use the   and   sensor controls to select Miele@home and select OK to confirm your selection.  U...

Selecting additional settings 69 Switching off Demo Mode    Demo mode allows the appliance tobe presented in the showroom with- out the cooling system beingswitched on . Do not activate this set- ting for domestic use. If Demo mode has been switched onas a default setting,   will show on the displ...

Selecting additional settings 70 Resetting the settings to their default settings   You can reset the refrigeration appliance‘s settings to their default settings. Reset the refrigeration appliance’s settings to the default settings when disposingof your refrigeration appliance, selling it, or putt...

Selecting additional settings 71 The refrigeration appliance‘s settings will be reset to the following values: Function Default settings  Language English  Display Brightness Average value (4 of 7 segments) Color Scheme Dark  /  Buzzer Tones Average value (4 of 7 segments) / Keypad Tone Average ...

Selecting additional settings 73 Switching off the Ice/Water-dis-penser lighting   The Ice/Water-dispenser lighting isswitched off completely.  In Settings mode   , use the   and   sensor controls to select the Dis- penser lighting and select OK to con- firm your selection.  Use the   and   ...

Selecting additional settings 74 - Ice Maker (if previously switched on) - The Ice/Water dispenser (if previously switched on) You can still select: - the sensor control for Settings mode   so that Sabbath Mode can be switched off The Sabbath Mode function will switch it- self off automatically aft...

Selecting additional settings 75 Switching on the Water Filter Display  If the Water Filter Display has been switched off once, it must be switchedon again if required.  In Settings mode  , use the  and  sensor controls to select the Water Filter Display and select OK to confirm your selection....

The correct temperature 76 It is very important to set the correcttemperature for storing food in the ap-pliance. Bacteria will cause food whichis not stored at the correct temperatureto deteriorate rapidly. Temperature influ-ences the growth rate of these bacteria.Reducing the temperature reduces t...

The correct temperature 77 Temperature range The temperature can be adjusted from7°F (-14°C) to -11°F (-24°C). The ambient temperature in the roomand the installation location can af-fect the time it takes for the appli-ance to reach the lowest tempera-ture.If the ambient temperature is toohigh, the...

Using SuperFrost 78 SuperFrost function   For best results, turn on the SuperFrostfunction before putting fresh food intothe freezer. Fresh food will be frozen quickly, so thatthe nutritional value, vitamin content,appearance, and taste are maintained. Exceptions: - Placing food in the freezer that...

Temperature and door alarm 79 The appliance has been fitted with awarning system which ensures that thetemperature in the freezer cannot riseunnoticed and to avoid energy beingwasted if the door is left open. Temperature alarm The Freezer temperature too high. Max. temperature °C message appears in ...

Temperature and door alarm 80 Door alarm An alarm will sound if the appliancedoor has been left open for longer thanapprox. 2 minutes.The Close the door message also ap- pears on the display. As soon as the door is closed, thealarm will stop and the message on thedisplay will disappear. Turning the ...

Adjusting the interior fittings 81 Removing the shelf above theice maker  Use both hands to grip the front ofthe shelf from below and press it onboth sides until you feel resistance  . When pulling out and inserting theshelf, make sure that the side wallsare not damaged.  Carefully pull the shelf...

Adjusting the interior fittings 82 Removing the freezer baskets  Open the appliance door as wide aspossible. The opening angle of the appliancedoor must not be limited to 90° be-cause otherwise the freezer basketscannot be removed.  Pull the freezer basket out as far as itwill go.  Raise the snap...

Freezing and storing food 83 Always observe USDA food safetyguidelines.  Risk of fire from electrical appli- ances.Operating electrical devices in theappliance can cause sparks to form.Do not operate any electrical devicesinside the appliance. Maximum freezing capacity To ensure that fresh food pla...

Freezing and storing food 84 Home freezing Only freeze food that is fresh and ingood condition. Tips for home freezing - The following types of food are suit- able for home freezing : fresh meat, poultry, game, fish, veg-etables, herbs, fresh fruit, dairy prod-ucts, baked goods, leftovers, eggyolks,...

Freezing and storing food 85 Before placing food in thefreezer  When freezing more than 4.4 lb (2 kg)of fresh food, switch on the Super-Frost function some time before plac-ing the food in the freezer (see “Su-perFrost”). This helps food which is already storedin the freezer to stay frozen. Placing...

Freezing and storing food 86 Defrosting frozen goods Never re-freeze partially or fully de-frosted food. Defrosted food may onlybe re-frozen after it has been cooked. Frozen food can be defrosted in differ-ent ways: - In a microwave - In an oven using “Convection” or the “Defrost” setting - At room ...

Operating the Ice/Water dispenser 87 The Ice/Water dispenser requires aplumbed water connection in order forit to operate (see “Installation –Plumbed water connection”). If you do not dispense chilled water orice from the Ice/Water dispenser for alonger period of time, the water/icemay be stale. Reg...

Operating the Ice/Water dispenser 89 Dispensing chilled water After the initial commissioning, theremay be air in the water circuit. Dis-pense water until there are no more airbubbles. All materials used in the Ice/Water dis-penser are odorless and do not affectflavor. If you dispense chilled water ...

Automatic defrosting 91  WARNING! DANGER of injury and damage!Do not use any mechanical or othertypes of aids which are not recom-mended by the manufacturer to ac-celerate the defrosting process. The appliance is equipped with a“NoFrost” system. The freezer defrostsautomatically. The moisture gener...

Cleaning and care 92  WARNING! DANGER of electric shock!Unplug the appliance or trip the cir-cuit breaker.  WARNING! Fire hazard! Do not damage the coolantpipework. Do not let water get into the elec-tronic or the lighting.  Risk of damage due to moisture penetration.The steam from a steam cleane...

Cleaning and care 93  Risk of damage due to incorrect cleaning and maintenance.The surface coating will be dam-aged.Do not treat the drip tray grille, back, and frame of the Ice/Water dispenserwith– Stainless steel cleaners: The coating will be damaged. – Miele conditioning agents for stain-less st...

Cleaning and care 94 Interior and accessories Clean the appliance regularly, or atleast once a month.Clean up any spills, stains, or foodimmediately. Do not allow them todry and stick to the appliance.  Clean the appliance with a solution oflukewarm water and liquid dish soap.Rinse all parts by han...

Cleaning and care 95 Cleaning and emptying the icecontainer Clean the ice container regularly.This ensures that fresh ice cubes arealways produced. Empty the ice container on a regularbasis. This prevents ice cubes fromfreezing together. The ice container is very heavy whenfull. Pull it out using bo...

Cleaning and care 96 Cleaning the water filter (Inten-siveClear 2.0 mesh filter) (see“Optional accessories”) Depending on the quantity of ice cubesproduced, the IntensiveClear 2.0 meshfilter must be cleaned approx. every6 months. You can use the Replace the water filter display on the display as a r...

Cleaning and care 97 6 .  Turn the cap of the filter cartridgeclockwise until it is in the horizontalposition 6.  Risk of damage caused by water rushing out.If the filter cartridge is not insertedcorrectly, there is a risk of waterleaking out of the appliance.When inserting the filter cartridge, b...

Water filter 98 The appliance is supplied with a waterfilter (IntensiveClear 2.0 charcoal filter)that filters supply water for making icecubes. The IntensiveClear 2.0 charcoal filterimproves the taste and smell of the icecubes by removing chlorine and othersubstances from supply water. However, to e...

Water filter 99 Changing the water filter Air in the system can cause water togush out and the filter cartridge tospring out when it is removed. Takegreat care when changing the waterfilter. 1 . 2 .  Turn the cap of the filter cartridgecounterclockwise until it is in the ver-tical position 1. and s...

Water filter 100 Once the IntensiveClear 2.0 charcoal fil-ter has been replaced, the water filterdisplay  must be reset using Settings mode   on the display (see “Selecting additional settings – Resetting the Water Filter Display    ”). After inserting a new water filter, dis-pose of all ice cube...

Water filter 103 Lead-free certificate This product F 1413 Vi (KIMSDF18US) is tested and certified by WQA againstNSF/ANSI 372 for "lead free" compliance. Miele & Cie. KGCarl-Miele-Straße 29D-33332 Gütersloh Lead free certificate 35 This product is tested and certified by WQA against NSF/...

Frequently Asked Questions 104 With the help of the following guide minor faults in the performance of the ma-chine, some of which may result from incorrect operation, can be remedied with-out contacting the Service Department. This guide may help you to find the reason for the fault, and how to cor...

Frequently Asked Questions 108 Messages in the display Message Possible cause and solution The warning soundsand the message Freezer temperature too high. Max.temperature °C appears on the display. The temperature in the appliance has risen signifi-cantly.This could be due to, for example: – the app...

Frequently Asked Questions 110 Problems with the ice/water dispenser Problem Possible cause and solution The Ice/Water dis-penser cannot beswitched on. The appliance is not connected to the power supply.  Check that the appliance is connected to the elec-tricity supply. The system lock of the Ice/W...

Frequently Asked Questions 111 Problems with the ice cube maker Problem Possible cause and solution The ice maker is notproducing any icecubes or no cold wateris being dispensed. The appliance or the Ice/Water dispenser has notbeen turned on.  Make sure that the appliance is turned on.  Make sure ...

Frequently Asked Questions 114 The interior lighting is not working. Problem Possible cause and solution The interior lighting isnot working. The refrigeration appliance has not been turned on.  Turn the refrigeration appliance on. The Sabbath Mode  function is switched on: the tem- perature displa...

Causes of noises 115 Normalnoises Cause Brrrrr... A humming noise is made by the motor (compressor). This noisecan get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulatesthrough the pipes. Click... Clicking sounds occur wheneve...

Customer Service 116 Contact in the event of a fault In the event of a fault which you cannotremedy yourself, please contact yourMiele dealer or Miele Customer Service. You can book a Miele Service Call on-line at www.miele.com/service. Contact information for Miele Cus-tomer Service can be found at...

Declaration of conformity 117 Frequency range 2.412 GHz –2.462 GHz Maximum trans-mitting power < 100 mW

Copyrights and licenses 118 Miele uses their own and third party software which is not subject to any so-calledopen source license for the operation and control of the device/appliance. Thissoftware/these software components are protected by copyright. The copyrightpowers of Miele and third parties ...

9 Independence WayPrinceton, NJ 08540 U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Customer Service. Canada ImporterMiele Limited Headquarters and Miele Centre Customer Service & Support Phone: 888-99-MIELE(64353)[emai...