Page 2 - RECOMMENDATIONS AND SUGGESTIONS
2 RECOMMENDATIONS AND SUGGESTIONS The instructions apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your appliance. INSTALLATION ● The manufacturer will not be held liable for any damages resulting from incorrect or impro...
Page 3 - Ref. Qty. Standard Installation Components; COMPONENTS
3 Ref. Qty. Product Components 1 1 Hood Body, complete with Control, Light, Blower, Filter. 2.1 1 Lower Decorative Chimney 2.2 1 Upper Decorative Chimney 4 1 Exhaust Pipe 5 2 Activated Charcoal Filter (optional) Qty. Documentation 1 Instruction Manual Ref. Qty. Standard Installation Components 10 5 ...
Page 4 - DIMENSION; Chimney
Page 5 - WALL DRILLING AND BRACKET FIXING; As the first step, proceed with the following drawings:; hood is to be fitted.
5 INSTALLATION WALL DRILLING AND BRACKET FIXING As the first step, proceed with the following drawings: ● A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the hood is to be fitted. ● A horizontal line A at 970 – 1070 mm above the cooker top. ● A horizont...
Page 6 - Hook the hood body; Hook the hood body to the bracket; Lower decorative chimney; supplied with the hood.; Upper decorative chimney; CONNECTIONS; DUCTED VERSION AIR EXHAUST SYSTEM
6 Hook the hood body ● Hook the hood body to the bracket 20 . ● Level the hood body itself. ● Lock screws (M5*12) into the hood fixing bracket to prevent the hood body from accidentally sliding off. Remove the filter from the inside of the hood body, and fix the screw 10 to wall plug 11 at the point...
Page 7 - Speed
7 USE After the hood is switched on, a beep sound will be heard and all key lights be lit up for 1 s, indicating the hood has been powered on: ● Power Key: Control the motor power. Under standby state, press the “power” button, “power” key light is on, the motor starts up at low speed, and digital s...
Page 8 - MAINTENANC; GREASE FILTER; LIGHTING; LIGHT REPLACEMENT; Replacing the light module
8 MAINTENANC ● The filters must be cleaned every 2 months of operation or more frequently for particularly heavy usage, and can be washed in a dishwasher. ● Remove the filters one by one by pushing them towards the back side of the hood unit and simultaneously pulling downwards. ● Any kind of bendin...
Page 9 - OLD ELECTRICAL APPLIANCE DISPOSAL; Dismantling LED light module
9 OLD ELECTRICAL APPLIANCE DISPOSAL The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to ...
Page 10 - TROUBLE SHOOTING; Fault; The cooker hood is not tightly fixed.
10 TROUBLE SHOOTING Fault Cause Solution Light is on, but motor does not work The blade is blocked.The capacitor is damaged. Replace the capacitor. The motor is damaged. Replace the motor. The internal wiring of motor is cut off/ disconnected. An unpleasant smell may be produced. Replace the motor. ...
Page 12 - FOR SPARE PARTS OR TO FIND THE ADDRESS OF
Maintenance schedule: To ensure the appliance continues to operate at peak performance, we recommend a routine service call every 3 years for the life of the appliance. FOR SPARE PARTS OR TO FIND THE ADDRESS OF YOUR NEAREST STATE SPARE PARTS CENTRE IN AUSTRALIA MIDEA HOME APPLIANCES AUSTRALIA PTY LT...