Page 2 - RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION; USE; MAINTENANCE
2 RECOMMENDATIONS AND SUGGESTIONS The instructions apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your appliance. INSTALLATION ● The manufacturer will not be held liable for any damages resulting from incorrect or impro...
Page 3 - COMPONENTS
3 Ref. Qty. Product Components 1 1 Hood Body, complete with Control, Light, Blower, Filter. 2.1 1 Lower Decorative Chimney 2.2 1 Upper Decorative Chimney 4 1 Exhaust Pipe 5 2 Activated Charcoal Filter (optional) Ref. Qty. Installation Components 10 7 Screws 5x50 11 7 Wall Plug 12 6 Screw 4,2x9,5/2 S...
Page 5 - WALL DRILLING AND BRACKET FIXING; As the first step, proceed with the following drawings:
5 INSTALLATION WALL DRILLING AND BRACKET FIXING As the first step, proceed with the following drawings: ● A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the hood is to be fitted. ● A horizontal line A at 1083-1183 mm above the cooker top. ● A horizonta...
Page 6 - Right; Right; CONNECTIONS; DUCTED VERSION AIR EXHAUST SYSTEM
6 ● Mark a point (3) on the horizontal line C, 80 mm to the vertical reference line. ● Repeat this operation on the other side, checking that the two marks are on one horizontal line. Fix the brackets (optional): ● Drill holes at the marked points with a ɸ10 mm drill bit. ● Insert the wall plugs 11 ...
Page 7 - CHIMNEY ASSEMBLY; Lower decorative chimney; Upper Decorative Chimney
7 CHIMNEY ASSEMBLY The chimney can only be installed with an exhausting hood. Lower decorative chimney ● Fix the chimney fixing bracket 21 onto the lower decorative chimney with 2 screws 12 (4.2 x 9.5) supplied with the hood. Upper Decorative Chimney ● Slightly widen the two sides of the upper chimn...
Page 9 - MAINTENANC; GREASE FILTER
9 MAINTENANC ● The filters must be cleaned every 2 months of operation or more frequently for particularly heavy usage, and can be washed in a dishwasher. ● Pull the comfort panel to open them. ● Remove the filters one by one by pushing them towards the back side of the hood unit and simultaneously ...
Page 10 - LED LIGHT REPLACEMENT; Replacing the light module; DISPOSAL OF OLD ELECTRICAL APPLIANCES; LED LIGHT MODULE DISMANTLEMENT
10 LED LIGHT REPLACEMENT Replacing the light module ● You should not replace the light bulb but the entire light module. ● When changing the light module, the contacts are live. ● Before changing the light module, unplug the appliance from the mains or switch off the circuit breaker in the fuse box....
Page 11 - TROUBLE SHOOTING; Fault
11 TROUBLE SHOOTING Fault Cause Solution Light is on, but motor does not work The blade is blocked.The capacitor is damaged. Replace the capacitor. The motor is damaged. Replace the motor. The internal wiring of motor is cut off/ disconnected. An unpleasant smell may be produced. Replace the motor. ...
