Meyer Sound SIM 3 - Manuals

Page 3 - Contents; section 2: preparation

iii Contents section 1: overview 1 What is SIM 3 Remote? 1 section 2: preparation 2 Acquiring the Software CD and X11 Utilities 2 Network Infrastructure / Hardware Error Handling Change 3 section 3: setup 6 Wireless Router Setup 6 Physical Setup With Router 8 Physical Setup Without Router 10 section...

Page 4 - what is siM 3 reMote?

1 sim 3 remote startup Guide seCtion 1: overview what is siM 3 reMote? SIM 3 Remote is an application that makes it possible to control SIM 3 hardware on a remote computer via an Ethernet network. Before using SIM 3 Remote it is important to note that SIM 3 Remote is not a standalone measurement sof...

Page 5 - aCquiring the soFtware Cd and X11 utilities; Third party files not maintained or updated by Meyer Sound; seCtion 2: preparation

2 section 2: preparation aCquiring the soFtware Cd and X11 utilities Before you get started you will need to download some files and you will need to have one blank recordable CD (CD-R) available to burn the Software CD. Meyer sound software Cd File(s) downloads: www.meyersound.com/products/sim/sim3...

Page 6 - network infrastructure; • CAT5 or better cabling; siM 3 Bios Modification

3 sim 3 remote startup Guide network infrastructure In order to setup SIM 3 Remote an Ethernet 100Mbps or faster network needs to be created. While it is much easier to have this set as a wired network SIM 3 Remote really becomes much more flexible when used in a wireless network. To set up a wirele...

Page 7 - Step 2: Use the up/down arrow keys to select “POST Error Handling”

4 section 2: preparation 4 Step 2: Use the up/down arrow keys to select “POST Error Handling” Use the right/left arrow keys to change the setting to “Ignore All” Step 3: Press <Escape> to return to the Main Menu. Use the up/down arrow keys to select “Saving the Settings” and press <Enter>...

Page 8 - The SIM 3 will now reboot with the new setting applied.

5 sim 3 remote startup Guide 5 Step 5: Use the up/down arrow keys to select “Exiting the System Setup Utility” Press <Enter>. Step 6: Press <Enter> while “Exit the System Setup Utility” is highlighted to exit the BIOS setup. The SIM 3 will now reboot with the new setting applied.

Page 9 - wireless router setup; • DHCP Enabled

6 section 3: setup wireless router setup 1. Enter the router basic setup page (refer to router user guide) and set the following parameters: • Router IP address to 192.168.1.1 • Subnet Mask to 255.255.255.0 • DHCP Enabled • Router DHCP starting IP address to 192.168.1.210 • Maximum number of DHCP us...

Page 10 - • Router SSID to MSLI

7 sim 3 remote startup Guide 2. Go to the Wireless Setup / Basic Wireless Settings page and set the following parameters: • Mode to G-only. (If both router and remote computer are capable of 802.11n then N-only should be selected. Using 802.11b will result in a very slow connection so unless it is t...

Page 11 - You should have a similar display:; windows; physiCal setup with router; Wireless

8 section 3: setup 2. Verify the properties of the remote computer’s Ethernet adapter. Make sure it is set for IP address: DHCP. You should have a similar display: windows os X physiCal setup with router 1. Connect the computer to the router using any of the LAN ports available (e.g. port 1) with a ...

Page 13 - physiCal setup without router; machine. This must be done the moment the SIM 3 is turned on.

10 section 3: setup physiCal setup without router In order to operate a SIM 3 machine remotely without using a wireless router connect the computer to the SIM machine with a CAT5 or better cable. Modern computers automatically apply an internal crossover when necessary – if using an older computer p...

Page 14 - seCtion 4: starting siM 3 reMote; starting siM 3 reMote (os X – all physiCal setups); Open the application X11

11 sim 3 remote startup Guide seCtion 4: starting siM 3 reMote starting siM 3 reMote (os X – all physiCal setups) 1. Open the application X11 (Applications/Utilities/X11) 2. At the prompt bash-3.2$ type the following commands (all commands are case sensitive): bash-3.2$ ssh –XC [email protected] &l...

Page 15 - First tiMe setup (windows – all physiCal setups)

12 section 4: startinG sim 3 remote First tiMe setup (windows – all physiCal setups) Depending on your Windows version and security settings you may be prompted to confirm/allow some of the following actions. 1. Copy both Xming-6-9-0-31-setup.exe and PuTTY.exe to your desktop 2. Install Xming on you...

Page 16 - starting siM 3 reMote (windows – all physiCal setups); root

13 sim 3 remote startup Guide starting siM 3 reMote (windows – all physiCal setups) Once First Time Setup (see Page 13) is complete the normal startup procedure is as follows: 1. Start Xming 2. Start PuTTY 3. Open the previsously saved session (Load/Open) 4. In the PuTTY terminal window type the fol...

Page 17 - q: Can SIM 3 Remote run without a SIM 3 machine?; os X keyBoard tips; Type pico to start the pico editor

14 section 4: startinG sim 3 remote Frequently asked questions (Faq) q: Can SIM 3 Remote run without a SIM 3 machine? a: No! SIM 3 Remote is just a connection to the SIM 3 software inside a physical SIM 3 machine. q: Can I have more than one simultaneous session of SIM 3 Remote using just one SIM 3 ...