Mercedes-Benz 03F-6635 - Manuals

- 6 - 4. Once the Pass-Key has been entered and accepted the LED (7) will be lit continuously. This confirms that the Motorola RAZR phone is paired and connected and the Motorola RAZR phone ’ s identity information has been stored in the Mercedes-Benz V3 Cradle. 5. The Motorola RAZR phone is now rea...

- 7 - If the connection between the Mercedes-Benz V3 Cradle and Motorola RAZR phone is not established automatically, it is possible to establish a connection manually (see page 8). Stored SMS messages can not be accessed via the COMAND or radio while the Bluetooth ® connection is established. The M...

- 9 - Disconnecting the Bluetooth ® connection automaticallyThe connection between the Motorola RAZR phone and the Mercedes-Benz V3 Cradle is automatically disconnected when the Motorola RAZR phone travels outside of the connection range (approx. 30 ft) of the Mercedes-Benz V3 Cradle. Disconnecting ...

- 10 - Removing Motorola RAZR phone 1. Press the latch (3) on the top of the Motorola RAZR phone (4). The latch (3) and the Motorola RAZR phone (4) will swing out. 2. Remove Motorola RAZR phone (4) sliding it out sideways. 3 4 M+P-03F-6640 Cradle_USA.fm Seite 10 Mittwoch, 20. September 2006 3:31 15

- 11 - Detaching the Mercedes-Benz V3 Cradle 1. Press and hold the release button (9). Slide the Mercedes-Benz V3 Cradle (1) in direction of arrow (8) and remove it from the pre-installed contact plate (2). NoteThis device complies with part 15 of the FCC Rules. Operation is subject to the following...