Memorex MVR4051/MVR4052 - Manuals

Memorex MVR4051/MVR4052 – Manual in PDF format online.

Manuals:

Manual

Manual Memorex MVR4051/MVR4052

Summary

Page 2 - ENGLISH; IMPORTANT SAFEGUARDS

2 The exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating andmaintenance (servicing) instructions in theliterature accompanying the appliance. WARNING: This equipment has been tested and found to comply with the limits for a Class B dig...

Page 5 - POWER SOURCE; PRECAUTIONS; LOCATION AND HANDLE

5 ENGLISH MOISTURE CONDENSATION DO NOT OPERATE THIS VCR FOR AT LEAST TWOOR THREE HOURS WHEN MOISTURE IN THE AIRCONDENSES ON THE VCR. WHAT IS MOISTURE CONDENSATION? When a cold liquid is poured into a glass, for example,water vapor in the air will condense on the surface of theglass. This is called m...

Page 6 - BATTERY INSTALLATION

6 High Quality Picture Technology - This video cassette recorder marked "HQ" incorporates VHS high qualitytechnology. A built-in detail enhancer is used to boostthe recorded signal and provide maximum picturequality in playback. It is compatible with other VHS videocassette recorders. 4 Vide...

Page 7 - CAUTIONS; TABLE OF CONTENTS

7 ENGLISH Automatic Repeat Play System - When the AUTO REPEAT option is turned on, this VCR will automaticallyplay back the same cassette tape repeatedly. On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or French. Slow Motion - This VCR provides slow mot...

Page 8 - FRONT; LOCATION OF CONTROLS; REMOTE CONTROL

8 FRONT LOCATION OF CONTROLS REMOTE CONTROL 1. Cassette Loading Slot - To insert or remove a video tape. 2. REW button - In the STOP mode, this button rapidly winds the tape backwards. In the PLAY mode, thisbutton activates Reverse Search. 3. PLAY button - Press to play a prerecorded tape. 4. STOP/E...

Page 9 - REAR

9 ENGLISH UHF/VHF OUT(TV) CH IN(ANT) VIDEO OUT 3 4 AUDIO L R REAR 14. AUDIO (L/R)/VIDEO In Jacks - Audio and video signal cables from an external source can beconnected here. 15. Direct Channel Selection buttons (0-9) - Allows direct access to any channel. 16. STOP button - Press to stop the tape. 1...

Page 10 - ANTENNA TO VCR CONNECTION; BASIC CONNECTIONS; Combination VHF/UHF Antenna with 75 ohm Coaxial Cable

10 OUT IN OUT IN OUT IN NOTES: • A clear picture will not be obtained by the VCR unless the antenna signal is good. Connect the antenna to theVCR properly. • For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of anoutdoor type antenna is required. • I...

Page 11 - VCR TO TV CONNECTION

11 ENGLISH U H F V H F OUT IN V H F / U H F I N OUT IN U H F V H F OUT IN NOTE: If a VHF or UHF antenna is used, set the TV/CATVmenu option to the "TV"mode. NOTE: If a VHF or UHF antenna is used, set the TV/CATVmenu option to the "TV"mode. NOTE: If a VHF or UHF antenna is used, set t...

Page 14 - AUDIO/VIDEO CONNECTIONS; AUDIO/VIDEO CONNECTION

14 OUT IN OUT IN When you connect your VCR to a Stereo Component System, you can view the picture from the VCR whileenjoying powerful sound from your audio system. If your TV has AUDIO IN and VIDEO IN jacks, you can connect your VCR to them to receive a higher qualitypicture and sound. If you have a...

Page 15 - SETTING THE VIDEO; LANGUAGE SELECTION

15 ENGLISH SETTING THE VIDEO CHANNEL For a push-button TV tuner If CH 3 or 4 corresponding to the video channel cannotbe tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, play back aprerecorded tape and tune the TV to receive a sharpcolor picture from th...

Page 16 - SETTING THE CHANNELS; NOISE ELIMINATION

16 AUTOMATIC MEMORY TUNING 〈 +/–/ENTER/MENU 〉 CH SET UP TV CATV AUTO CH MEMORYADD/DELETE TO ADD/DELETE CHANNELS 1 Press the MENU button.Press the TRACKING SET +or – button to select the CHSET UP option, then press theENTER button. 2 Press the TRACKING SET + or– button to select the ADD/DE-LETE mode,...

Page 17 - FORWARD/REVERSE PICTURE SEARCH; DIGITAL TRACKING CONTROL; LOADING; AUTOMATIC POWER ON; LOADING AND UNLOADING; PLAYBACK

17 ENGLISH TO REWIND OR FORWARD THE TAPE RAPIDLY Press the REW button in theSTOP mode. " " will appear on the screen for about 4 seconds. Press the F.FWD button in theSTOP mode. " " will appear on the screen for about 4 seconds. When a tape is played, the Digital Auto Tracking System...

Page 18 - TO WATCH A TAPE REPEATEDLY; SLOW MOTION PLAYBACK; SPECIAL PLAYBACK; FRAME BY FRAME ADVANCE

18 RECORDING AND VIEWING THE SAME TV PROGRAM CHECK BEFORE YOU BEGIN • Turn ON the TV and set to the video channel 3 or 4. • Press the POWER button to turn the VCR on. • Press the TV/VCR selector button to select theVCR mode. When a TV is connected with an audio/video cable, turnthe TV and this VCR o...

Page 19 - RECORDING A TV PROGRAM; TO RECORD AGAIN

19 ENGLISH 4 Press the REC/OTR button." " will appear on the screenfor about 4 seconds and theREC indicator will light. Press the PAUSE/STILL buttonto avoid recording unwantedmaterial. Press again or pressthe REC/OTR button to continuethe recording. Press the STOP button to stoprecording....

Page 21 - SETTING THE TIMER RECORDING

21 ENGLISH When setting the date in step 3 in the Setting the TimerRecording section on the previous page, press theTRACKING SET – button repeatedly.The setting changes as follows: EXAMPLE Press the TRACKING SET + or– button to select the TIMERREC SET option in the MENU.Then press the ENTER button t...

Page 22 - OR; LISTENING TO SAP; OUTPUT SELECTION; RECORDING STEREO BROADCASTS

22 SEPARATE AUDIOPROGRAM (SAP) 1 Press the MENU button.Press the TRACKING SET +or – button to select the SAPoption. 2 Press the ENTER button toselect the ON position. 3 Press the MENU button again. When the VCR is turned on or a channel selection ismade, make certain “SAP” appears on the screen. Thi...

Page 23 - VIDEO HEAD CLEANING

23 ENGLISH The video heads are the means by which the VCRreads pictures from the tape during playback. In theunlikely event that the heads become dirty enough to beclogged, no picture will be played back. This can easilybe determined if, during playback of a known good tape,there is good sound, but ...

Page 24 - BEFORE REQUESTING SERVICE

24 No picture on screen when playing back a recorded tape. Noise bars on screen. The TV is not set to the video channel 3 or 4. Tracking adjustment beyond range of automatic tracking circuit. Video heads are dirty. The tape is worn or damaged. Set to the video channel 3 or 4 or adjust the fine tunin...

Page 25 - SPECIFICATIONS

25 ENGLISH Remote control does not work. It is not aimed at the remote sensor. Distance too far or too much light in the room. There is an obstacle in the path of the beam. The batteries are weak. The +, – polarity of the batteries are not inserted correctly. The TV/VCR function is in the VCR mode. ...

Page 26 - MEMO

26 MEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Memorex Manuals

Memorex MVD2022 User Manual
Memorex MVD2022 Manual
Memorex MLT1522 User Manual
Memorex MLT1522 Manual
Memorex MVD1402 User Manual
Memorex MLT2022 User Manual
Memorex MLT2022 Manual
Memorex MVDT2402 User Manual
Memorex MVD2042 User Manual
Memorex MVD2042 Manual
Memorex MT2274 User Manual
Memorex MT2274 Manual
Memorex MVD2113 User Manual
Memorex MVD2113 Manual
Memorex MT1701 User Manual
Memorex MT1701 Manual
Memorex MVD4541 User Manual
Memorex MVD4541 Manual
Memorex MT1134 User Manual
Memorex MT1134 Manual