Memorex MVR4041 - Manuals

8 TV/VCR SPEED SLOW MENU REW REC/OTR PAUSE/STILL CHANNEL F.FWD SET ENTER STOP PLAY 1 2 3 4 5 6 7 0 8 9 – TRACKING + CALL CANCEL COUNTER RESET CLOCK/ COUNTER AUDIO SELECT AUTO TRACKING TIMER REC INPUT SELECT ZERO RETURN POWER FRONT LOCATION OF CONTROLS REMOTE CONTROL 8 23 22 4 19 1. Cassette Loading ...

9 ENGLISH REAR 16. CLOCK/COUNTER selector button - Switches between the clock and the real time tape counter. 17. COUNTER RESET button - Resets the Real Time Tape Counter to 00:00:00. 18. TV/VCR selector button - Switches between TV and VCR. 19. PAUSE/STILL button - During recording, this button tem...

10 OUT IN OUT IN OUT IN NOTES: • A clear picture will not be obtained by the VCR unless the antenna signal is good. Connect the antenna to the VCR properly. • For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor type antenna is required. •...

11 ENGLISH OUT IN U H F V H F OUT IN U H F V H F OUT IN V H F / U H F I N NOTE: If a VHF or UHF antenna is used, set the TV/CATVmenu option to the "TV"mode. NOTE: If a VHF or UHF antenna is used, set the TV/CATVmenu option to the "TV"mode. NOTE: If a VHF or UHF antenna is used, set t...

14 OUT IN When you connect your VCR to a Stereo Component System, you can view the picture from the VCR whileenjoying powerful sound from your audio system. If your TV has AUDIO IN and VIDEO IN jacks, you can connect your VCR to them to receive a higher qualitypicture and sound. If you have a stereo...

15 ENGLISH SETTING THE VIDEO CHANNEL For a push-button TV tunerIf CH 3 or 4 corresponding to the video channel cannotbe tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, play back aprerecorded tape and tune the TV to receive a sharpcolor picture from the...

16 AUTOMATIC MEMORY TUNING 〈 +/–/ENTER/MENU 〉 CH SET UP TV CATV AUTO CH MEMORYADD/DELETE TO ADD/DELETE CHANNELS 1 Press the MENU button.Press the TRACKING/SET +or – button to select the CHSET UP option, then press theENTER button. 2 Press the TRACKING/SET + or– button to select the ADD/DE-LETE mode,...

17 ENGLISH TO REWIND OR FORWARD THE TAPE RAPIDLY Press the REW button in theSTOP mode." " will appear on the screen for about 4 seconds. The REWindicator will light in the display forabout 4 seconds. When a tape is played, the Digital Auto Tracking Systemautomatically adjusts the tracking to...

18 RECORDING AND VIEWING THE SAME TV PROGRAM CHECK BEFORE YOU BEGIN • Turn ON the TV and set to the video channel 3 or 4.• Turn ON the VCR POWER button.• Press the TV/VCR selector button to select the VCR mode. When a TV is connected with an audio/video cable, turnthe TV and this VCR on and select t...

19 ENGLISH 4 Press the REC/OTR button." ● " will appear on the screen for about 4 seconds. The RECindicator will light in the displayfor about 4 seconds. Press the PAUSE/STILL buttonto avoid recording unwantedmaterial. Press again or pressthe REC/OTR button to continuethe recording. Press th...

21 ENGLISH When setting the date in step 3, press the TRACKING/SET – button repeatedly.The setting changes as follows: Example Press the TRACKING/SET + or– button to select the TIMERREC SET option in the MENU.Then press the ENTER button todisplay the timer program list.Press the MENU button twice to...

22 1 Press the CALL button to display the counter on thescreen. (When loading a cassette tape, the clock willchange to the counter automatically in the display.) 2 Before playback or recording, press the COUNTERRESET button to set the counter to "00:00:00". 3 Begin playback or recording. 4 P...

23 ENGLISH The video heads are the means by which the VCRreads pictures from the tape during playback. In theunlikely event that the heads become dirty enough to beclogged, no picture will be played back. This can easilybe determined if, during playback of a known good tape,there is good sound, but ...

24 No picture on screen when playing back a recorded tape. Noise bars on screen. The TV is not set to the video channel 3 or 4. Tracking adjustment beyond range of automatic tracking circuit. Video heads are dirty. The tape is worn or damaged. Set to the video channel 3 or 4 or adjust the fine tunin...

25 ENGLISH FOR ADDITIONAL SET-UP INFORMATION OR CUSTOMER SERVICE PLEASE CALL: 1-800-919-3647 Remote control does not work. It is not aimed at the remote sensor. Distance too far or too much light in the room. There is an obstacle in the path of the beam. The batteries are weak. The +, – polarity of ...

26 MEMO ................................................................................................................ ................................................................................................................ .....................................................................