Memorex MT1701 - Manuals

Memorex MT1701 – User Manual, Manual in PDF format online.

Manuals:

User Manual
Manual

Contents ................................................................................................................................................1 Important Safety Instructions .............................................................................................................2 Loca...

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; All operating and use instructions should be followed.; CAUTION; RISK OF ELECTRIC SHOCK

IMPORTANT SAFETY INSTRUCTIONS 2 Before using the unit, be sure to read all operating instructions carefully. Please note that these are generalprecautions and may not pertain to your unit. For example, this unit may not have the capability to be connected toan outdoor antenna. 1. READ INSTRUCTIONS A...

Page 4 - IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

13. LIGHTNING To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 14. POWER LINES ...

Page 5 - LOCATION OF CONTROLS

1 8 2 3 4 5 6 7 9 11 10 12 13 1. TV/AV/PC Button 2. Volume Down Button 3. Volume Up Button 4. Channel Down Button 5. Channel Up Button 6. MENU Button 7. Power Button 8. Left Speaker 9. Display 10. Power Indicator 11. Remote Sensor 12. Stand 13. Right Speaker 4 LOCATION OF CONTROLS FRONT

Page 8 - REMOTE CONTROL; BATTERY INSTALLATION; BATTERY PRECAUTIONS; EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER

REMOTE CONTROL 7 BATTERY INSTALLATION + + 1 Open the battery compartment cover by pushing in on the tab, then lifting it up. Install two “AAA” batteries, paying attention to the polarity diagram in the battery compartment. Replace the battery compartment cover. BATTERY PRECAUTIONS Follow these preca...

Page 9 - OUTDOOR ANTENNA CONNECTIONS; Separate VHF/UHF Antennas; OR; POWER SOURCE; be equal to or greater than the electrical rating of the unit.; When using a 3-pronged plug

8 OUTDOOR ANTENNA CONNECTIONS OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use. Combination VHF/UHFAntenna (Single 75 ohm cableor 300 ohm twin-lead wire) Separate VHF/UHF Antennas Combination VHF/UHFAntenna (Separate V...

Page 10 - FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE; connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the; FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE; converter/descrambler or satellite box to select channels.; INCOMING; DESCRAMBLER OR

CABLE (CATV)/SATELLITE CONNECTIONS 9 This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of ...

Page 11 - VCR CONNECTIONS; CONNECTION USING COAXIAL CABLE:; TV or CATV; appears on the TV screen and press PLAY on the VCR to watch

10 VCR CONNECTIONS CONNECTION USING COAXIAL CABLE: Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.) 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR. 2. Connect a 75 ohm coaxial cab...

Page 13 - DVD CONNECTIONS; Connect the DVD’s Video OUT jack to the TV’s VIDEO AV1 IN jack.

12 DVD CONNECTIONS 1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s AUDIO left and right AV1 IN jacks. Connect the DVD’s Video OUT jack to the TV’s VIDEO AV1 IN jack. 2. Press the TV/AV/PC button until AV1/CVBS appears on the TV screen and press PLAY on the DVD to...

Page 14 - CONNECTION USING COMPONENT CABLES:

13 DVD CONNECTIONS (CONTINUED) 1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s AUDIO left and right AV2 IN jacks. 2. Connect a video cable from the DVD’s Component Out jacks to the TV’s AV2 IN (Cr, Cb, Y) jacks. 3. Press the TV/AV/PC button until AV2 appears on t...

Page 15 - COMPUTER CONNECTION; Refer to the computer’s owner’s manual for instructions.; KENSINGTON LOCK; products. Kensington lock is not included.

14 COMPUTER CONNECTION 1. Connect the audio cable from the computer’s Audio OUT jacks to the TV’s VGA Audio IN jack. 2. Connect a VGA cable from the computer’s VGA OUT jack to the TV’s VGA IN jack. 3. Press the TV/AV/PC button until PC appears on the TV screen. 4. Refer to the computer’s owner’s man...

Page 16 - VIEWING ANGLE ADJUSTMENT; useful for storing the monitor.

This unit is designed to allow you to have a comfortable viewing angle, which can be adjusted from -5° to +25°. 15 VIEWING ANGLE ADJUSTMENT +25° -5% To adjust the base so it is at 90°, simply press the Release button on the bottom of the stand. This is useful for storing the monitor. NOTE: Do not fo...

Page 17 - WALL MOUNTING THE UNIT

16 WALL MOUNTING THE UNIT Detach the stand cover by pulling it outward as per arrow A. A 1 Remove the four (4) screws (A) using a phillips head screwdriver and remove the handle. Remove the four (4) screws (B) using a phillips head screwdriver and remove the stand. A A A BB A B B 2 This monitor conf...

Page 18 - TV MENUS; TV MODE; AUDIO MENU; VIDEO MENU

17 TV MENUS TV MODE When the TV is set to the TV mode, the menu lets you customize the unit by allowing you to change various settings as follows: 1. Press the MENU button on the main unit or the ® button 1 on the remote to access the on-screen menu. 2. Select one of the options at the top of the sc...

Page 19 - CLOSED CAPTIONS MENU; I entered the Captions mode, but no captions are appearing, why?

18 TV MENUS CLOSED CAPTIONS MENU WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. CLOSED ...

Page 21 - AV MENUS; AV MODE; AUDIO VIDEO SYSTEM; SYSTEM MENU

20 AV MENUS AV MODE When the TV is set to the AV1 or AV2 mode, the menu lets you customize the unit by allowing you to change various settings as follows: 1. Press the MENU button on the main unit or the ® button 1 on the remote to access the on-screen menu. 2. Select one of the options at the top o...

Page 22 - PC MENUS; PC MODE

21 PC MENUS PC MODE When the TV is set to the PC mode, the menu lets you customize the unit by allowing you to change various settings as follows: 1. Press the MENU button on the main unit or the ® button 1 on the remote to access the on-screen menu. 2. Use the Navigation a 4 or e 5 button to select...

Page 23 - SETTING THE CHANNELS INTO MEMORY; The TV will automatically; How many channels will I actually receive?

SETTING THE CHANNELS INTO MEMORY 22 This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. In addition to normal VHF/UHF...

Page 24 - ADDING AND SKIPPING CHANNELS

ADDING AND SKIPPING CHANNELS 23 After setting channels into memory, you can add or delete channels as follows: Press the POWER button 1 to turn on the TV; the POWER indicator will light green. Press the TV/AV/PC button 2 until TV or CATV appears. Select the TV or CATV option as described on page 17....

Page 25 - TV OPERATION; OPTIONS; Why do I only receive 69 channels, when my cable goes much higher?

TV OPERATION 24 Adjust the volume level by pressing the VOLUME Up ❶ or Down ❷ button. The volume level will be indicated on the screen by green bands and a green numerical display between 0 and 24 where 0 is the lowest setting and 24 is the loudest. 2 1 3 For proper operation, before selecting chann...

Page 26 - STEREO; MTS

TV OPERATION (CONTINUED) 25 MUTE LAST CHANNEL Repeatedly press this button to cycle through the device(s) connected to the INPUT jacks. 1 TV/AV/PC Press to select one of the following sound modes: STEREO : Select for channels that are broadcasting in stereo. MONO : Select for channels broadcasting i...

Page 27 - Press to select the screen scale (4:3 standard screen or

26 TV OPERATION (CONTINUED) DISPLAY SLEEP TIMER Press to select the screen scale (4:3 standard screen or 16:9 wide-screen). 1 4:3/16:9 Press the DISPLAY button once to show the mode (i.e. S- VIDEO) and audio mode. Press again to clear the display. 1 Press repeatedly to set the sleep time between “10...

Page 28 - STANDARD TIMING TABLE

Page 29 - TROUBLESHOOTING GUIDE

SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION POWER No power. The AC power cord is not Connect the AC power cord to connected. the AC outlet. TV BROADCAST RECEPTION TV station experiencing problems. Try another channel. Poor or no picture. Picture control is not adjusted. Check picture control settings. ...

Page 30 - RECEPTION DISTURBANCES; lamps, electric drills and other electric appliances.; RADIO FREQUENCY INTERFERENCE:; cases, causes loss of contrast in the picture.; PICTURE SIZE VARIATION:; CONTRAST or BRIGHTNESS setting.; CARE AND MAINTENANCE

RECEPTION DISTURBANCES 29 IGNITION: Black spots or horizontal streaks may appear, picture may Ŗutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electric drills and other electric appliances. GHOSTS: Ghosts are caused by the television signal following two ...

Page 31 - SPECIFICATIONS

LCD PANEL Size...........................................................................................................................................17” (43cm) Display Type .................................................................................................Active matrix color TFT LC...