Memorex MPH2089 - Manuals

E–5 This section has been designed to provide a reference guide to help set up the unit. 1. Unpack and make sure all the items have been included: Base Unit, Power Adaptor and Telephone Line Cord. 2. Connect one end of the provided telephone line cord into the LINE jack on the rear of the unit and t...

POWER SOURCES 6 AC Power Adapter To operate the unit using AC power, connect the AC adapter to the DC jack on therear of the unit and to a wall outlet having 120V, 60Hz only. CAUTION: Use only the AC adapter provided with the unit. Using another AC adapter may damagethe unit. When not using AC power...

OPERATION 7 Press and hold the TIME button ❶ for 2 seconds and the unit will announcethe day of the week (i.e. Monday).Press the SKIP ➛➛ /MEMO button ❷ to decrease or the SKIP ❿❿ /OGM button button ❸ to increase until the present day of the week is heard. 1 3 2 1 Press the TIME button ❶ again and th...

OPERATION (CONTINUED) 8 Press and hold the SKIP ❿❿ /OGM button for approximately 2 secondsuntil a short beep is heard, and thenrelease the button. Begin recordingyour outgoing message speaking in anormal tone of voice.Typical Message: “You have reachedthe Smith residence. We are not ableto come to t...

OPERATION (CONTINUED) 9 NOTES: • If the unit detects a dial tone, silence or a busy signal, the unit will hang up and may not register the message. • When the memory is full, no ICMs can be recorded.• When the batteries are low, dead or not installed, “Lo” will appear in the display. Make sure the O...

OPERATION (CONTINUED) 10 To record a personal memo which willbe played the next time somebodyretrieves the memos, press and holdthe SKIP ➛➛ /MEMO button for approximately 2 seconds; a beep willsound. When the beep is heard,release the SKIP ➛➛ /MEMO button. 1 After the message is recorded, pressthe P...

OPERATION (CONTINUED) 12 To stop playback, press thePLAY/STOP button and the unit willsave the previous messages. 5 NOTES: • After playing the ICMs, the unit will automatically reset to take new messages. • The maximum recording time for an ICM (Incoming Message) is 60 seconds. IF MEMORY IS FULL If ...

REMOTE OPERATION 13 Call the answering machine from aseparate line. After the OGM is played(press “*” to skip OGM), and the beepis heard, enter your remote codewithin 10 seconds. 1 Press the “*” pad, then the “5” pad toturn the unit off. 2 TURNING THE ANSWERING MACHINE OFF Call the answering machine...

REMOTE OPERATION 14 Call the answering machine from aseparate line. After the OGM is played(press “*” to skip OGM), and the beepis heard, enter your remote codewithin 10 seconds. 1 REMOTELY PLAYING INCOMING MESSAGES (ICM’S) Press the “4” pad to play all messagesor the “5” pad to play only newmessage...

17 REMOTE OPERATION (CONTINUED) STOP CALL: Press the “#” pad to stop the remote function. After the OGM is played, and the beepis heard, enter your remote codewithin 10 seconds. 1 Press the “*” pad, followed by the “3”pad to change the remote code. 2 TO CHANGE THE REMOTE CODE (REMOTELY) Press and ho...

CONVENIENT REMOTE ACCESS CARD 18 For your convenience, cut out this card and keep it in your wallet as areference guide when remotely calling your answering machine. IDLE MODE (No Messages Playing) Button Function 1 Play OGM 2 Starts room monitoring 3 Playback memos 4 Playback all ICMs 5 Playback ne...

TROUBLESHOOTING GUIDE 19 SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION No Power. AC adaptor not con- Connect AC adaptor to nected to unit. DC 9V jack on unit. AC adaptor not con- Connect AC adaptor to nected to the AC outlet. the AC outlet.No power. Move to another outlet. No OGM. No OGM recorded. Record...

Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memcorpinc.com MPH2089 O/M.QXD 9/4/01 10:30 AM Page 20