Memorex MK1996 - Manuals - manualsarea.com

Page 2 - SAFETY PRECAUTIONS; Safety Training Information:

Thank you for purchasing this Memorex product.The serial number of your unit can be found on a label on the back of the cabinet. Wesuggest that you record the serial number in the space provided below in case thisinformation is ever needed at a future date. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT ...

Page 4 - LOCATION OF CONTROLS; Battery Compartment; FRONT

3 LOCATION OF CONTROLS 23 1 9 10 11 13 12 8 4 5 7 6 1. SPK (Speaker)/MIC (Microphone)/CHG(Charger) Jack 2. PTT (Push To Talk) Button3. Display4. MON (Monitor) Button5. FUNC (Function) Button6. CALL Button7. Built-in Microphone 8. Antenna9. Power Button10. SCAN Button11. CHANNEL/VOLUME Up/Down Button...

Page 5 - Number; INSTALLATION; TO INSERT; TO REMOVE; TO USE THE BELT CLIP; DISPLAY

4 LOCATION OF CONTROLS (CONTINUED) 11 10 4 9 8 7 6 5 3 2 1 1. Signal Strength Indicators2. Monitor Indicator3. Roger Beep Indicator4. Key Lock Indicator5. Battery Status Indicator6. DW (Dual Watch) Indicator 7. LO Indicator8. VOX Indicator9. CTCSS Sub Channel Number 10. SCAN Indicator11. Main Channe...

Page 6 - INSTALLING STANDARD BATTERIES; INSTALLING AND CHARGING THE RECHARGEABLE BATTERY PACK

5 INSTALLATION (CONTINUED) INSTALLING STANDARD BATTERIES When battery power is full, will not be displayed. When battery power is low, will appear in the display. When battery power is almost empty, will blink in the display. When the Battery Status indicator is empty, it is time to replace your bat...

Page 7 - LISTENING TO TRANSMISSIONS:; OPERATION; TURNING THE UNIT ON/OFF

6 LISTENING TO TRANSMISSIONS: When the unit is on, it will automatically broadcast the incoming signal when astrong incoming signal is received on the selected channel. NOTE: When transmitting, hold the unit in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from your mo...

Page 8 - SELECTING ONE OF THE 22 MAIN CHANNELS; SELECTING ONE OF THE 38 CTCSS SUB-CHANNEL CODES

7 OPERATION (CONTINUED) Press the FUNC button; the mainchannel number will blink. 1 Within eight seconds, press theCHANNEL/VOLUME Up ❶ or Down ❷ button to raise/lower the main channel number. Press the PTTbutton ❸ or wait eight seconds to confirm and exit. 1 2 3 2 SELECTING ONE OF THE 22 MAIN CHANNE...

Page 11 - SETTING THE CALL TONES; or FUNC; SCANNING CHANNELS

10 OPERATION (CONTINUED) Press the FUNC button seven times;“C” will appear and the call tonenumber will blink. 1 Within eight seconds, press theCHANNEL/VOLUME Up ❶ or Down ❷ button to set the call tone (1 to 3); the selected call tone will sound.Press the PTT button ❸ or wait eight seconds to confir...

Page 12 - CALLING ANOTHER PARTY; channel and sub-channel for the call function to work.

11 Press the FUNC button ❶ , then select a desired channel using theCHANNEL/VOLUME Up ❷ or Down ❸ buttons. Press the FUNC button ❶ again to confirm the channel. 2 1 3 1 Press the CALL button once and waitfor the party’s response. 2 CALLING ANOTHER PARTY To alert another party that you wish to commun...

Page 14 - Low Battery Indicator; ) icon will blink and audible beep tones will sound. If using; Auto Power Saver

Low Battery Indicator When the batteries are low and need to be replaced or recharged, theBattery ( ) icon will blink and audible beep tones will sound. If using standard batteries, replace them. If using rechargeable batteries, rechargethem.NOTE: When the batteries are low, the unit may not work pr...

Page 15 - SPECIFICATIONS

CHANNEL CH FREQ (MHz) 1 462.5625 2 462.5875 3 462.6125 4 462.6375 5 462.6625 6 462.6875 7 462.7125 8 467.5625 9 467.5875 10 467.6125 11 467.6375 CHANNEL CH FREQ (MHz) 12 467.6625 13 467.6875 14 467.7125 15 462.5500 16 462.5750 17 462.6000 18 462.6250 19 462.6500 20 462.6750 21 462.7000 22 462.7250 1...