Memorex MCC215 - Manuals

LOCATION OF CONTROLS 4 1 6 7 8 9 2 345 1. Up π Button 2. OK Button 3. Display 4. Down † Button 5. MENU Button 6. Power Button 7. Mode Control 8. SHUTTER Button 9. USB/TV OUT Jacks (Under Compartment) AV CABLE PART NO. E532R4POLAR0001* USB CABLE PART NO. E531RAMTOMIN008* *Consumer Replaceable Part (S...

1 3 2 5 6 4 6 5 LOCATION OF CONTROLS (CONTINUED) 1. Battery Compartment ( BATTERY COVER PART NO. P337RBDV096C011*) 2. Speaker 3. Lens 4. SD/MMC Card Slot (Bottom of Unit) 5. Microphone 6. Strap Holders (HANDSTRAP PART NO. K910RDV096C0001*) CD PART NO. K539RCD096C0001**Consumer Replaceable Part (See ...

6 USING THE STRAP Fold over the Strap Flap and connect as shown. Adjust as desired to fit your hand. Insert the Velcro straps into each of the Strap Holders. 1 3 Press the velcro ends onto the straps to adjust the length of the straps as desired. 2

GETTING STARTED 7 1 Slide the cover back on. NOTE: When the batteries are low, the battery low indicator will blink in the display. BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct...

GETTING STARTED (CONTINUED) 8 1 2 Press the Power button to turn the unit on. “Memorex” will appear briefly in the display. TURNING THE POWER ON AND OFF Press and hold the Power button until “Goodbye” appears in the display (approximately one second). NOTE: To save the battery power, the unit will a...

9 GETTING STARTED (CONTINUED) HINTS ON USING AN SD/MMC CARD : 1. When an SD/MMC card is inserted, the Card indicator will appear in the display and new pictures taken will be stored on the SD/MMC card automatically. 2. Push the SD/MMC card all the way in to make sure the SD/MMC card is fully inserte...

2 1 OPERATION 10 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the Picture Taking position. 1 TAKING A SINGLE PICTURE P V SET SET Press the Up π button 1 to zoom in or the Down † button 2 to zoom out as desired. This zoom function works only for resolutions of 640 x 480 ...

OPERATION (CONTINUED) 11 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the Picture Taking position. 1 CHANGING THE PICTURE MODE P V SET SET Press the MENU button and the settings will appear. 2 Press the Up π button 1 or the Down † button 2 to select the Picture Mode...

OPERATION (CONTINUED) 12 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the Picture Taking position. 1 CHANGING THE PICTURE RESOLUTION P V SET SET Press the MENU button and the settings will appear. 2 Press the Up π button 1 or the Down † button 2 to select the Resolu...

OPERATION (CONTINUED) 13 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the Picture Taking position. 1 CHANGING THE WHITE BALANCE P V SET SET Press the MENU button and the settings will appear. 2 Press the Up π button 1 or the Down † button 2 to select the White Balan...

OPERATION (CONTINUED) 14 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the Picture Taking position. 1 CHANGING THE EV COMPENSATION P V SET SET Press the MENU button and the settings will appear. 2 Press the Up π button 1 or the Down † button 2 to select the EV Compen...

OPERATION (CONTINUED) 15 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the Picture Viewing position. 1 VIEWING THE PICTURES P V SET SET Press the Up π button 1 or the Down † button 2 to select other pictures. 2 1 2 2 1 3 To delete the selected picture, press the MENU...

OPERATION (CONTINUED) 16 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the Video Taking position. 1 RECORDING A VIDEO P V SET SET Press the Shutter button and then the unit will start recording the video and the counter will start counting. Press the Shutter button a...

OPERATION (CONTINUED) 17 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the Video Recording position. 1 CHANGING THE VIDEO RESOLUTION P V SET SET Press the MENU button and the settings will appear. 2 Press the Up π button 1 or the Down † button 2 to select the Resolut...

OPERATION (CONTINUED) 20 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the Video Viewing position. 1 VIEWING THE VIDEOS P V SET SET Press the Up π button 1 or the Down † button 2 to select a video. Press the OK button 3 to start playback. Press again to stop playback...

OPERATION (CONTINUED) 21 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the SET position. 1 SETTING THE DATE AND TIME P V SET SET Press the Up π button 1 or the Down † button 2 to select the Time Set option. Press the OK button 3 ; the Time Set screen will appear. 2 3...

OPERATION (CONTINUED) 23 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the SET position. 1 FORMATTING THE SD/MMC CARD P V SET SET Press the Up π button 1 or the Down † button 2 to select the Format setting. 2 1 2 Press the OK button; “Y” and “N” will appear. Select “...

OPERATION (CONTINUED) 24 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the SET position. 1 SETTING THE LIGHT FREQUENCY P V SET SET Press the Up π button 1 or the Down † button 2 to select the Frequency setting. 2 1 2 Press the MENU button 1 to select the desired Ligh...

25 OPERATION (CONTINUED) 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the SET position. 1 SETTING THE PC CAMERA/MASS STORAGE P V SET SET Press the Up π button 1 or the Down † button 2 to select the PC Camera/Mass Storage setting. 2 1 2 Press the MENU button 1 to sel...

OPERATION (CONTINUED) 26 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the SET position. 1 VIEWING THE VERSION P V SET SET Press the Up π button 1 or the Down † button 2 to select the Version. 2 1 2 Press the OK button to view the current firmware version. 3

OPERATION (CONTINUED) 27 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the SET position. 1 SETTING THE ICON P V SET SET Press the Up π button 1 or the Down † button 2 to select the Icon setting. 2 1 2 Press the MENU button 1 to select the desired mode (see above), an...

OPERATION (CONTINUED) 28 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the SET position. 1 TURNING THE RECORDED AUDIO ON AND OFF DURING VIDEO PLAYBACK P V SET SET Press the Up π button 1 or the Down † button 2 to select the Audio On or Off setting. 2 1 2 Press the ME...

OPERATION (CONTINUED) 29 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the SET position. 1 CHANGING THE TV SYSTEM P V SET SET Press the Up π button 1 or the Down † button 2 to select the TV System setting. 2 1 2 This is used when connecting the AV cable to your TV. P...

OPERATION (CONTINUED) 30 2 1 Press the Power button 1 to turn the unit on. Rotate the Mode control 2 to the SET position. 1 DEFAULT SETTING P V SET SET Press the Up π button 1 or the Down † button 2 to select the Default setting. 2 1 2 Press the OK button. “Y” and “N” will appear in the display. Sel...

31 CONNECTING THE UNIT TO A TV You can connect this unit to a TV using the supplied A/V cable. This will allow you to view the unit’s videos and pictures on a non-high definition (non- HD) television. First, make sure to set the TV SYSTEM to NTSC or PAL, corresponding to your TV color system as show...

CONNECTING YOUR CAMERA TO YOUR PC: Once you have taken a few pictures/videos with your camera or as soon as the camera’s memory is full, you can download the files into your computer. Connect your camera to the PC, following these simple steps: 1. Turn on your computer. 2. Turn on the camera and set...

SOFTWARE INSTALLATION 33 SUPPORTED OPERATING SYSTEMS This unit is compatible with Microsoft Windows XP (Home or Professional Edition with Service Pack 2 or higher) or Vista. • Before and while installing the software, make sure that you do not have the camera attached to your computer. This will adv...

Installing PhotoImpression and VideoImpression 1. After completing the Driver installation, click “Photo & Video Editing”. 2. Click “Video Impression” and follow the on-screen instructions to install the VideoImpression software. 3. Click “Photo Impression” and follow the on-screen instructions ...

DOWNLOADING AND TRANSFERRING FILES 35 TRANSFERRING PHOTO/VIDEO FILES FROM THE UNIT USING DRAG AND DROP METHOD USING WINDOWS 1. Turn on your computer. 2. Turn on the unit. 3. Connect the smaller end of the cable to the USB jack on the unit and the larger end of the cable to your USB port on your PC. ...

See below for basic instructions on using the PhotoImpression software. For full features/instructions, click the “?” (top right corner of the window) or visit Arcsoft’s website. 1. Click START c PROGRAMS c Arcsoft PhotoImpression4 c PhotoImpression4. You can also double click the PhotoImpression sh...

See below for basic instructions on using the VideoImpression software. For full features/instructions, click the “?” (top right corner of the window) or visit Arcsoft’s website. 1. Click START c PROGRAMS c Arcsoft VideoImpression 1.6 c VideoImpression 1.6. You can also double click the VideoImpress...

1. Set the Camera to PC Camera, as described on page 25. 2. Connect the camera to the computer as described on page 32. 3. Double click the “PC Camera” icon on your desktop, the screen at the right will appear. 4. Click the ® icon and then click to start the image capture. 5. To set the Video Format...

40 SAFELY REMOVING THE HARDWARE SAFELY REMOVING THE UNIT FROM THE COMPUTER NOTE: To avoid damage to the unit or data loss, always follow the procedure listed below before disconnecting the unit from the USB port on your computer. Using your mouse, double click the "Safely Remove Hardware" ic...

TROUBLESHOOTING GUIDE 41 If you experience a problem with this unit, check the chart below before calling for service. Symptom Possible Cause Solution Unit will not turn on. Power is off. Press the Power button for one second to turn on. Batteries are weak or dead. Replace batteries. Images/pictures...

43 Formatting the Player WARNING! Do not format this player unless it stops working and you are instructed to do so by technical support personnel. 1. Use the USB cable to connect the player and the computer. 2. Double click on My Computer, then right click "Removable Disk" and left click on...

44 If the unit acts erratically, reset the unit by removing the batteries for a couple of seconds and then reinserting. FOR FIRMWARE UPGRADE Please visit our Web site at www.memorexelectronics.com to check if there is new firmware available. IMPORTANT NOTE: Before upgrading the firmware, please back...

SPECIFICATIONS 45 System Requirements and Compatibility • Operating System: For PC: Windows XP (SP2)/Vista • USB 1.1 • CD-ROM Drive If you have questions regarding your system specifications, please call your PC manufacturer. Camera Specifications Internal Memory .......................................

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT: WWW.MEMOREXELECTRONICS.COM FOR CONSUMER REPLACEABLE PART(S), SEE PART NUMBER(S) ON PAGES 4 AND 5 AND THEN CONTACT FOX INTERNATIONAL AT: 1-800-321-6993. FOR FIRMWARE UPGRADE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS...

Memorex, the Memorex logo, and "Is it live or is it Memorex?", are trademarks of the affiliates of Memorex Products, Inc. Imation Electronic Products, A Division of Imation Enterprises Corp., Weston, Florida. Printed in China www.memorexelectronics.com