Page 3 - Thermo Hygrometer Sensor
Introduction Thank you for selecting a Meade Instruments 5-channel thermo-hygro sensor!Meade Instruments is the world’s leading designer and manufacturer of telescopes for professional and amateur astronomers – famous for its innovative, high performance telescopes at affordable prices. Meade Instru...
Page 4 - BEFORE; permanently mounting them outside.; Before you begin; compartment
Note: It is critical to power up and test communication between the remote sensor and the main unit BEFORE permanently mounting them outside. Before you begin • We recommend using alkaline batteries for the remote thermo-hygrometer when temperatures are above 32ºF (0ºC) and lithium batteries when te...
Page 5 - A C
Features • LCD display of measured temperature and humidity • Five (5) transmission channels selection• Case can be wall mounted using built-in hanger A. LED INDICATOR • Flashes once when the remote sensor transmits a reading to the main unit. • Flashes twice when battery power is low. B. BATTERY CO...
Page 6 - Battery installation; Phillips; Mounting; To display the readings from the remote thermo-
Battery installation • Remove the screws from the battery compartment with a small Phillips screwdriver. • Set the channel 1 through 5. The switch is located in the battery compartment. Channel 1 is typically selected if only one remote thermo-hygrometer is being used.• Install 2 "AA" size a...
Page 7 - RESET; opening with a paper clip or similar tool.; DOWN; button on the main unit to force a search for the; Precautions
TroubleshootingQ: "The remote sensor display shows dashes "---"" A: Press the RESET opening with a paper clip or similar tool. If this does not work, check the batteries and replace them. Q: "Main unit display in temperature and humidity portion shows dashes "---"" A:...
Page 9 - DECLARATION OF CONFORMITY
There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to improve or correct turning the interference ...
Page 10 - BATTERY SAFETY INSTRUCTIONS; • If batteries or parts are swallowed, see a doctor immediately.
BATTERY SAFETY INSTRUCTIONS • Always purchase the correct size (2 x 1.5V AA, 15A/15AC ANSI, LR6 IEC), (2 x ANSI/NEDA-5004LC, IEC-CR2032) and grade of battery most suitable for the intended use.• Replace all batteries of a set at the same time.• Clean the battery contacts and also those of the device...
Page 11 - STANDARD WARRANTY INFORMATION; Prior to the return of any product
STANDARD WARRANTY INFORMATION This product is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a period of ONE YEAR from date of original retail purchase in the U.S.A. MIC will repair or replace the product, or part thereof, found upon inspection by M...
Page 12 - Meade Instruments Corp.
Meade Instruments Corp. 27 HubbleIrvine, CA 92618 U.S.A. © 2010 Meade Instruments Corporation. All Rights Reserved.All user manual contents and information are subject to change. MADE IN CHINA