Page 2 - Smart Vend SLIM DC and AC Retro Readers
PR & PR/PD READERS DESCRIPTION Smart Vend PR & PR/PD Readers The Smart Vend PR Reader is a smart card reader that has been developed to work directly with Maytag PR machines. PR readers are the substitute for coin drops and/or coin slides at the washer or dryer. The PR reader communicates se...
Page 3 - READER PROGRAMMING; Keys to Successful Programming
READER PROGRAMMING Keys to Successful Programming Programming a PR, PR/PD or SLIM Retro reader successfully relies on having a known good, complete set of setup cards. Never mix cards from one location with another. Also keep the setup cards together so if ever needed, all of the cards will be ready...
Page 4 - THE PROGRAMMING CARDS
THE PROGRAMMING CARDS Key Card: Card # 1 The Key Card is always the first card inserted into the reader, PR, PR/PD and SLIM Retro. This card loads the keys “secret passwords” into the reader so that competitors’ equipment won’t interfere with another. The keys can also be removed from a reader by re...
Page 6 - SLIM RETRO READER SETUP PROCEDURE; Smart Vend SLIM Retro Readers
SLIM RETRO READER SETUP PROCEDURE Smart Vend SLIM Retro Readers The SLIM Retro-fit reader needs a special set of setup cards to be setup. Following is a list of procedures to setup a SLIM Retro-Reader. 1. Install the SLIM Retro reader into the machine 2. Plug in the machine 3. Insert the System Key ...
Page 8 - SLIM RETRO DIP SWITCHES AND WIRING
SLIM RETRO DIP SWITCHES AND WIRING Slim Daughter Board DIP Switch Settings DIP-Switch settings for the Maytag CompuTrac2 (PD) Units 1-On, 2-On, 3-On, 4-Off, 5-Off, 6-On, 7-On, 8-On, 9-On, 10-Off, 11-Off, 12-On SLIM Retro Wiring for a Single Maytag Washer or Dryer Maytag Machine Smart Vend SLIM Conne...
Page 9 - BASIC TROUBLESHOOTING
BASIC TROUBLESHOOTING PR & PR/PD Reader 1. Check for a Fault Code Displayed on the Maytag Board 2. Test with a User Card 3. Attempt to Reprogram the Reader • When reprogramming the reader, the keys are toggled on and off each time the Key Card is inserted 4. Change the Reader with a Brand New Re...
Page 10 - ERROR MESSAGES
ERROR MESSAGES CARD ERROR 01 1. Bad site code or site code is not loaded into the reader. Either load the site code into the reader for the user card or replace the user card with a user card with the correct site code. CARD ERROR 02 1. Invalid purse data. The card balance is lost. A new card must b...