Martin Audio W8VDQ - Manuals

All material © 2008. Martin Audio Ltd. Subject to change without notice. a) Fit the clamping plate assemblies to the left and right yoke arms as illustrated. Clamping plates fitted to left & right yoke arms. Please note orientation. b) Fit the yoke arms to the yoke before bolting them to the W8V...

All material © 2008. Martin Audio Ltd. Subject to change without notice. The yoke may be turned upside down for an alternative tilt angle range… Alternative orientation 4 Aiming for best coverage The W8VDQ is designed for medium coverage – up to 25m distance x 100deg (120deg in the nearfield). Heigh...

All material © 2008. Martin Audio Ltd. Subject to change without notice. Aiming The W8VDQ can cover approximately 30deg vertically. The easiest way to set the tilt angle for maximum rear audience level is to aim the top section of the grille straight towards the furthest seat. See Maximum level to f...

All material © 2008. Martin Audio Ltd. Subject to change without notice. This policy avoids clipping transient peaks. Clipping not only sounds unacceptable but can seriously stress your system by dumping large amounts of distortion into the high frequency drivers - especially in passive mode. Contro...

All material © 2008. Martin Audio Ltd. Subject to change without notice. 6 Connections Active/Passive operation W8VDQs may be operated in Active (3way bi-amplified) or Passive (3way passive) mode. Rear panel showing Active/Passive switch, pinout & nearfield attenuator switch The W8VDQ connector ...