Marmitek TOTALGUARD - Manuals

1. Your Marmitek surveillance system The contents of your set: The Marmitek SafeGuard system is an effective security system for your home. In this kit you will find the following components: 1. Security console SC90002. Motion Detector MS903. Door/Window Sensor DS904. Key Chain Remote Control KR215...

The Marmitek TotalGuard system is identical to the SafeGuard system, but also contains components for prevention and comfort.The TotalGuard system also contains the following components: 1. Lamp/Dimmer Module LM122. Comfort Remote Control SH6243. One extra DS90 Door/Window Sensor ☺ All components of...

• You can use up to 16 wireless remote controls.• 2 inputs for wired sensors.• Silent alarm possible (no siren).• By calling the system, you can control the system remotely and check the status. The TotalGuard also lets you switch on the lights. • Prevention: Your lights are switched on and off in s...

Display: 1. Zone numbers Every sensor represents a so-called zone in the system. There are 30 zones for wireless sensors (numbers 1-30 on the display)and 2 zones for wired sensors (numbers 31 and 32 on the display). Zone numbers on: Door or window is open.Zone number flashing slowly: There is a prob...

2.2 Mounting the security console Choose a good space for the console and make sure you have a wall socket (230V) and a telephone connection close by. Foroptimal range it is best to mount the console central to the objects you wish to secure. This ensures that the distance betweenthe console and the...

3. Installing remote controls 3.1 Key Chain Remote Control KR21 1. CONTROLE INDICATOR Lights up when the remote control transmits radio signals when pressing the buttons. If the indicator light is not very bright, the batteries should be replaced. 2. ARM Switches on the alarm in Arm Away mode (all s...

3.2 Comfort Remote Control SH624 (standard with TotalGuard, optional with SafeGuard, art. no. 09170) 1. PANIC With this red button the panic alarm can be activated immediately. 2. CONTROL INDICATOR Lights up when the remote control transmits radio signals when pressing thebuttons.If the indicator li...

4. Installing the sensors 4.1 Door/Window Sensor DS90 1. Transmitter part.2. Magnet contact.3. Control Indicator – Lights up when a signal is transmitted. 4. Screw for opening the sensor.5. Switch for entry delays.6. Connection for extra wired contact (9.4).7. Battery compartment.8. Screw holes for ...

4.2.2 Using the Motion Detector 1. Open the battery compartment and insert the batteries (2x AA, alkaline).2. Keep the TEST button (3) pressed for about 4 seconds. The LED will flash once. Release the button. The LED will flash twice. The motion detector has now chosen a unique code, which can be re...

4.3 Smoke Detector SD10 / SD90 The Marmitek Smoke Detector will make sure you are warned in case of a fire. Whenyou’re at home, the built-in siren will be triggered. Combined with your security system theinternal siren, the telephone dialler and the lights will be activated. This gives you anoptimal...

9. Press 2 (REPLAY) to listen to the message you have just recorded. 10.Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the menu. If you choose No, you go back to the main menu. 6. Using the security system 6.1 Setting the ala...

2. Activate the alarm via the SH624 Comfort Remote Control Press the red PANIC button. The panic alarm is instantly triggered. Depending on the console settings thesiren will be triggered or not (see 9.1). 6.3 What happens when the alarm goes off? 1. Siren The built-in siren will be triggered. You c...

7. Prevention and comfort - ‘Home Automation’ 7.1 Introduction Marmitek Home Automation makes your home more comfortable, saves energy and offers security, both when you are at homeand away. For some people Home Automation means setting the lights with the same remote control they use for the TV; fo...

4 7.2 Addressing your modules An address can be set for every Marmitek X-10 module. This address consists of a HOUSECODE (A-P) and aUNITCODE (1-16). The HOUSECODE of all your components needs to be set to the same letter code (keep allthe HOUSECODES set to A. See 10.6 for more information.). With th...

9. Enter the time you want to lights to be switched off (24 hour notation). If you make a mistake, press CLEAR. Press OK when you do not want to enter a switch-off time. 10. The bottom line on the display now reads 1. DAILY.11. Use the menu buttons / to select: 1. DAILY: The timer setting is execute...

26 MARMITEK 8. Advanced system functions 8.1 Setting the delays You can set a number of delay times via the menu DELAYS: ENTRY DELAY The time you get to switch off the system after entering your house (factory setting 30 seconds). EXIT DELAY The time you get before the system is switched on when you...

EXTRA OPTIONS 27 SAFEGUARD / TOTALGUARD 8.3 Changing the access code (PIN) The access code is your personal secret code. After changing this code, you are the only one who has access to the settings onthe console. You also use this code to disarm the alarm via the number pad. Make sure you memorise ...

EXTRA OPTIONS 28 MARMITEK 6. Choose 1 for CHIME ON or 2 for CHIME OFF.7. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the menu. If you choose No, you go back to the main menu. 8. If you see a note ( ) on the display, the ch...

EXTRA OPTIONS 30 MARMITEK 9.7 Deregistering a Motion Detector 1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’. 2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear on the display...

☺ If you set the UnitCode for the console to e.g. A16, the comfort lighting will get addresses A16 and A1. To change the UnitCode: 1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’. 2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing t...

11.3 Operating the alarm functions via an outside phone 1. Call your home number. The console will answer.2. You will hear ‘Please enter PIN’. Enter your PIN code.3. If your PIN is correct, you will hear ‘PIN accepted’. If your PIN is incorrect, you will hear ‘Error’.4. Press 0 followed by * to acti...

EXTRA OPTIONS 35 SAFEGUARD / TOTALGUARD Key Chain Remote Control KR21 – 2x CR2016 batteries De KR21 wordt geleverd met volle batterijen. Wanneer de indicator op de KR21 zwak gaat branden, dienen de batterijenvervangen te worden. • A new KR21 contains fully charged batteries. If the indicator light o...

13. Frequently asked questions Why does the security system not work? Check whether you see any text on the console display. If not: check whether the AC adapter is connected to the mains, whetherthe electrical wire is plugged into the adapter and whether the plug is connected to the console.Check w...

TABEL SENSORS Sensor Nr. Location Sensor type 1 _________ _____________________________________________________________________________ ____________________ 2 _________ _____________________________________________________________________________ ____________________ 3 _________ ____________________...

TECHNICAL DATA SC9000 MAIN UNIT Supply: 230VAC 50 Hz, 4 x AA back-upbattery - 24-hour stand-by. Supply current : < 80 mA capacitive Signal transmission: > 5Vpp in 5 Ohm at 120 kHz ± 1 kHz X-10 transmission: 1 pulse burst at 0˚, 60˚ and 120˚ Sends X-10 Key codes: On, Off.RF receiver frequency: ...

DECLARATION OF CONFORMITY Hereby, Marmitek BV, declares that this SC9000 is in compliance with the essential requirements and other relevant provisions of the following Directives: Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunicat...